Antonio Lopez Uceda

Dr. Antonio Lopez Uceda

Materials Science and Engineering Area, University of Cordoba, 14240 Córdoba, Spain

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 June 2024 in Environmental Science and Pollution Research
Verified
Journal Article
Open access
PDF file
LLLinares Linares
Linares Linares
AUAntonio Lopez Uceda
Antonio Lopez Uceda
APAndrea Piccinali
Andrea Piccinali
Cristina Martínez RuedasCristina Martínez Ruedas
Cristina Martínez Ruedas
Adela Pérez GalvínAdela Pérez Galvín
Adela Pérez Galvín
Nowadays, all productive sectors, including the construction industry, are facing the challenge of reducing their environmental impact. To achieve this objective, numerous actions are being carried out to access greater levels of environmental and economic sustainability. Techniques as Life Cycle Assessment contribute to quantifying environmental impacts, promoting a circular economy in a sector that consumes a high volume of resources, materials, and energy while generating large amounts of gaseous, liquid, or solid emissions. The present study aims to deepen our understanding of aspects that demonstrate the benefits of using RA instead of natural aggregates. This study not only quantifies the environmental impact but also explores the effects of potential improvements in the productive system and their impact on reducing environmental harm. The Life Cycle Assessment methodology is applied to quantify and compare the environmental impacts generated in the production of a ton of mixed recycled aggregates (MRA) from construction and demolition wastes, based on the data provided by plant managers. This is compared to the environmental impacts generated in the production of one ton of natural aggregates extracted from a quarry. The results revealed that the production of mixed recycled aggregate is more environmentally beneficial, confirming a reduction of 70.66% in environmental impacts during the production of recycled aggregates, in comparison to the natural aggregates extraction. Furthermore, the economic analysis demonstrates the economic advantage since the cost of producing recycled aggregates is over 30% cheaper than natural aggregates, being more competitive even when the transportation distances from the plant to the work sites exceed those of natural aggregates. Graphical Abstract

26 January 2016 in Materials
Verified
Journal Article
Open access
PDF file
AUAntonio Lopez Uceda
Antonio Lopez Uceda
JAJesus Ayuso
Jesus Ayuso
MLMartin López
Martin López
JJJosé Ramón Jiménez
José Ramón Jiménez
Francisco AgrelaFrancisco Agrela
Francisco Agrela
MSMaría José Sierra
María José Sierra
In spite of not being legally accepted in most countries, mixed recycled aggregates (MRA) could be a suitable raw material for concrete manufacturing. The aims of this research were as follows: (i) to analyze the effect of the replacement ratio of natural coarse aggregates with MRA, the amount of ceramic particles in MRA, and the amount of cement, on the mechanical and physical properties of a non-structural concrete made with a low cement content; and (ii) to verify if it is possible to achieve a low-strength concrete that replaces a greater amount of natural aggregate with MRA and that has a low cement content. Two series of concrete mixes were manufactured using 180 and 200 kg/m3 of CEM II/A-V 42.5 R type Portland cement. Each series included seven concrete mixes: one with natural aggregates; two MRA with different ceramic particle contents; and one for each coarse aggregate replacement ratio (20%, 40%, and 100%). To study their properties, compressive and splitting tensile strength, modulus of elasticity, density, porosity, water penetration, and sorptivity, tests were performed. The results confirmed that the main factors affecting the properties analyzed in this research are the amount of cement and the replacement ratio; the two MRAs used in this work presented a similar influence on the properties. A non-structural, low-strength concrete (15 MPa) with an MRA replacement ratio of up to 100% for 200 kg/m3 of cement was obtained. This type of concrete could be applied in the construction of ditches, sidewalks, and other similar civil works.

1 July 2018 in Journal of Cleaner Production
Verified
Journal Article
Open access
JTJavier Tavira
Javier Tavira
JJJosé Ramón Jiménez
José Ramón Jiménez
JAJesus Ayuso
Jesus Ayuso
AUAntonio Lopez Uceda
Antonio Lopez Uceda
Enrique Fernandez LedesmaEnrique Fernandez Ledesma
Enrique Fernandez Ledesma

8 April 2019 in Environmental Science and Pollution Research
Verified
Journal Article
Closed access
PDF file
AUAntonio Lopez Uceda
Antonio Lopez Uceda
Adela Pérez GalvínAdela Pérez Galvín
Adela Pérez Galvín
Auxi BarbudoAuxi Barbudo
Auxi Barbudo
JAJesús Ayuso
Jesús Ayuso

2 February 2016 in Materials
Verified
Journal Article
Open access
PDF file
AUAntonio Lopez Uceda
Antonio Lopez Uceda
JAJesus Ayuso
Jesus Ayuso
JJJosé Ramón Jiménez
José Ramón Jiménez
Francisco AgrelaFrancisco Agrela
Francisco Agrela
Auxi BarbudoAuxi Barbudo
Auxi Barbudo
Jorge De BritoJorge De Brito
Jorge De Brito
This research aims to produce non-structural concrete with mixed recycled aggregates (MRA) in upscaled applications with low-cement content. Four slabs were executed with concrete made with different ratios of coarse MRA (0%, 20%, 40% and 100%), using the mix design, the mixing procedures and the facilities from a nearby concrete production plant. The analysis of the long-term compressive and splitting tensile strengths in concrete cores, extracted from the slabs, allowed the highlighting of the long-term high strength development potential of MRA incorporation. The study of cast specimens produced in situ under the same conditions as the slabs showed, firstly, that the use of MRA has a great influence on the properties related to durability, secondly, that the loss of compressive strength for total MRA incorporation relative to control concrete increases proportionally with the class strength, and, thirdly, that the mechanical properties (including Schmidt hammer results) from the concrete slabs showed no significant differences relative to the control concrete for coarse aggregates replacements up to 40%. Therefore, this upscaled experimental study supports the application of concrete with 100% coarse MRA incorporation and low cement content in non-structural civil works such as bike lanes, gutters, ground slabs, leveling surfaces, and subgrades for foundations. To the best of the authors’ knowledge, there have not been any upscaled applications of concrete with MRA and low cement content.

22 October 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PVPietro Antonio Vaccaro
Pietro Antonio Vaccaro
Adela Pérez GalvínAdela Pérez Galvín
Adela Pérez Galvín
JAJesus Ayuso
Jesus Ayuso
Auxi BarbudoAuxi Barbudo
Auxi Barbudo
AUAntonio Lopez Uceda
Antonio Lopez Uceda
For many decades, researchers have been working on finding innovative and sustainable solutions to address the enormous quantities of plastic waste that are produced every year which, after being collected, are transformed into energy, recycled, or sent to landfills. Giving a second life to plastic waste as a material to be incorporated, in the form of macro-fibres, into concrete, could be one such solution. The purpose of this study was to analyse the mechanical and physical behaviour of the hardened concrete reinforced with macro plastic fibres (RPFs) obtained from food packaging waste (FPW) discarded during the packaging phase. By varying the quantity of macro-fibres used, physical and mechanical properties such as compressive strength, modulus of elasticity, flexural strength, and toughness were evaluated. It was observed that, although the presence of macro plastic fibres reduced the mechanical resistance capacity compared to that of traditional concrete, their contribution proved to be of some importance in terms of toughness, bringing an improvement in the post-crack resistance of the composite material. This innovative mixture provides a further impulse to the circular economy.