Silver nanowires (AgNWs) have emerged as a promising nanomaterial for next generation stretchable electronics. However, until now, the fabrication of AgNWbased components has been hampered by complex and time-consuming steps. Here, we introduce a facile, fast, and one-step methodology for the fabrication of highly conductive and stretchable AgNW/polyurethane (PU) composite electrodes based on a high-intensity pulsed light (HIPL) technique. HIPL simultaneously improved wire–wire junction conductivity and wire–substrate adhesion at room temperature and in air within 50 μs, omitting the complex transfer–curing–implanting process. Owing to the localized deformation of PU at interfaces with AgNWs, embedding of the nanowires was rapidly carried out without substantial substrate damage. The resulting electrode retained a low sheet resistance (high electrical conductivity) of <10 Ω/sq even under 100% strain, or after 1,000 continuous stretching–relaxation cycles, with a peak strain of 60%. The fabricated electrode has found immediate application as a sensor for motion detection. Furthermore, based on our electrode, a light emitting diode (LED) driven by integrated stretchable AgNW conductors has been fabricated. In conclusion, our present fabrication approach is fast, simple, scalable, and costefficient, making it a good candidate for a future roll-to-roll process.

The development of flexible and stretchable sensors has been receiving increasing attention in recent years. In particular, stretchable, skin-like, wearable sensors are desirable for a variety of potential applications such as personalized health monitoring, human-machine interfaces, and environmental sensing. In this paper, we review recent advancements in the development of mechanically flexible and stretchable sensors and systems that can be used to quantitatively assess environmental parameters including light, temperature, humidity, gas, and pH. We discuss innovations in the device structure, material selection, and fabrication methods which explain the stretchability characteristics of these environmental sensors and provide a detailed and comparative study of their sensing mechanisms, sensor characteristics, mechanical performance, and limitations. Finally, we provide a summary of current challenges and an outlook on opportunities for possible future research directions for this emerging field.

The monitoring of currents in the abyssal ocean is an essential foundation of deep-sea research. The state-of-the-art current meter has limitations such as the requirement of a power supply for signal transduction, low pressure resistance, and a narrow measurement range. Here, we report a fully integrated, self-powered, highly sensitive deep-sea current measurement system in which the ultra-sensitive triboelectric nanogenerator harvests ocean current energy for the self-powered sensing of tiny current motions down to 0.02 m/s. Through an unconventional magnetic coupling structure, the system withstands immense hydrostatic pressure exceeding 45 MPa. A variable-spacing structure broadens the measuring range to 0.02–6.69 m/s, which is 67% wider than that of commercial alternatives. The system successfully operates at a depth of 4531 m in the South China Sea, demonstrating the record-deep operations of triboelectric nanogenerator-based sensors in deep-sea environments. Our results show promise for sustainable ocean current monitoring with higher spatiotemporal resolution.