Cellulose nanocrystals (CNC) and nanofibers (CNF) have been broadly studied as renewable nanomaterials for various applications, including additives in cement and plastics composites. Herein, life cycle inventories for 18 previously examined processes are harmonized, and the impacts of CNC and CNF production are compared with a particular focus on GHG emissions. Findings show wide variations in GHG emissions between process designs, from 1.8-1100 kg CO2-eq/kg nanocellulose. Mechanical and enzymatic processes are identified as the lowest GHG emission methods to produce CNCs and CNFs. For most processes, energy consumption and chemical use are the primary sources of emissions. However, on a mass basis, for all examined production methods and impact categories (except CO emissions), CNC and CNF production emissions are higher than Portland cement and, in most cases, are higher than polylactic acid. This work highlights the need to carefully consider process design to prevent potential high emissions from CNCs and CNF production despite their renewable feedstock, and results show the magnitude of conventional material that must be offset through improved performance for these materials to be environmentally favorable.
Global greenhouse gas emissions from the built environment remain high, driving innovative approaches to develop and adopt building materials that can mitigate some of those emissions. However, life-cycle assessment (LCA) practices still lack standardized quantitative uncertainty assessment frameworks, which are urgently needed to robustly assess mitigation efforts. Previous works emphasize the importance of accounting for the three types of uncertainties that may exist within any quantitative assessment: parameter, scenario, and model uncertainty. Herein, we develop a quantitative uncertainty assessment framework that distinguishes between different types of uncertainties and suggest how these uncertainties could be handled systematically through a scenario-aware Monte Carlo simulation (MCS). We demonstrate the framework’s decision-informing power through a case study of two multilevel ordinary Portland cement (OPC) manufacturing scenarios. The MCS utilizes a first-principles-based OPC life-cycle inventory, which mitigates some of the model uncertainty that may exist in other empirical-based cement models. Remaining uncertainties are handled by scenario specification or sampling from developed probability distribution functions. We also suggest a standardized method for fitting distributions to parameter data by enumerating through and implementing distributions based on the Kolmogorov–Smirnov test. The level of detail brought by the high-resolution parameter breakdown of the model allows for developing emission distributions for each process of OPC manufacturing. This approach highlights how specific parameters, along with scenario framing, can impact overall OPC emissions. Another key takeaway includes relating the uncertainty of each process to its contributions to total OPC emissions, which can guide LCA modelers in allocating data collection and refinement efforts to processes with the highest contribution to cumulative uncertainty. Ultimately, the aim of this work is to provide a standardized framework that can provide robust estimates of building material emissions and be readily integrated within any uncertainty assessment.
Biochar, formed through slow pyrolysis of biomass, has garnered attention as a pathway to bind atmospheric carbon in products. However, life cycle assessment data for biomass pyrolysis have limitations in data quality, particularly for novel processes. Here, a compositional, predictive model of slow pyrolysis is developed, with a focus on CO2 fluxes and energy products, reflecting mass-weighted cellulose, hemicellulose, and lignin pyrolysis products for a given pyrolysis temperature. This model accurately predicts biochar yields and composition within 5 % of experimental values but shows broader distributions for bio-oil and syngas (typically within 20 %). This model is demonstrated on common feedstocks to quantify biochar yield, energy, and CO2 emissions as a function of temperature and produce key life cycle inventory flows (e.g., 0.73 kg CO2/kg poplar biochar bound carbon at 500 °C). This model can be adapted to any lignocellulosic biomass to inform development of pyrolysis processes that maximize carbon sequestration.
The development of methods to reuse large volumes of plastic waste is essential to curb the environmental impact of plastic pollution. Plastic-reinforced cementitious materials (PRCs), such as plastic-reinforced mortar (PRM), may be potential avenues to productively use large quantities of low-value plastic waste. However, poor bonding between the plastic and cement matrix reduces the strength of PRCs, limiting its viable applications. In this study, calcium carbonate biomineralization techniques were applied to coat plastic waste and improved the compressive strength of PRM. Two biomineralization treatments were examined: enzymatically induced calcium carbonate precipitation (EICP) and microbially induced calcium carbonate precipitation (MICP). MICP treatment of polyethylene terephthalate (PET) resulted in PRMs with compressive strengths similar to that of plastic-free mortar and higher than the compressive strengths of PRMs with untreated or EICP-treated PET. Based on the results of this study, MICP was used to treat hard-to-recycle types 3–7 plastic waste. No plastics investigated in this study inhibited the MICP process. PRM samples with 5% MICP-treated polyvinyl chloride (PVC) and mixed type 3–7 plastic had compressive strengths similar to plastic-free mortar. These results indicate that MICP treatment can improve PRM strength and that MICP-treated PRM shows promise as a method to reuse plastic waste.
The production of materials from mineral resources is a significant contributor to anthropogenic CO 2 emissions. This contribution is driven primarily by chemical CO 2 emissions from the conversion of mineral resources and emissions tied to energy demands for material processing. In this work, we synthesize the thermodynamically required enthalpy and chemically derived emissions of mineral processing and consumption in the United States. We quantify mass, enthalpy, and emissions flows for minerals described by the US Geological Survey, with 882 mass flows and 155 chemical reactions analyzed. In total, 503 PJ of enthalpy is thermodynamically required for 398 Mt of chemically converted material consumption in the United States, resulting in 129 Mt of chemically derived CO 2 emissions. Additionally, 249 PJ of fuel resources such as coke are stoichiometrically required for the chemical conversion of minerals. These enthalpy requirements and CO 2 emissions are primarily from high‐mass consumption materials such as cement, carbon steel, fertilizer, and aluminum. Cumulatively, the dataset synthesized in this work provides a complete view of the chemical requirements of mineral processing and can aid in guiding decarbonization or sustainable growth in critical minerals sectors, including construction materials and materials for energy storage or generation.