Metallic glass composites with shape memory crystals show enhanced plasticity and work-hardening capability. We investigate the influence of various critical structural aspects such as, the density of crystalline precipitates, their distribution and size, and the structural features and intrinsic properties of the phase on the deformation behavior of metallic amorphous Cu Zr composites with B2 CuZr inclusions using molecular dynamics simulations. We find that a low density of small B2 inclusions with spacing smaller than the critical shear band length controls the formation and distribution of plastic zones in the composite and hinders the formation of critical shear bands. When the free path for shearing allows the formation of mature shear bands a high volume fraction of large B2 precipitates is necessary to stabilize the shear flow and avoid runaway instability. Additionally, we also investigate the deformation mechanism of composites with pure copper crystals for comparison, in order to understand the superior mechanical properties of metallic glass composites with shape memory crystals in more detail. The complex and competing mechanisms of deformation occurring in shape memory metallic glass composites allow this class of materials to sustain large tensile deformation, even though only a low-volume fraction of crystalline inclusions is present.
Residual stress engineering is widely used in the design of new advanced lightweight materials. For metallic glasses, attention has been given to structural changes and rejuvenation processes. High-energy scanning X-ray diffraction strain mapping reveals large elastic fluctuations in notched metallic glasses after deformation under triaxial compression. Microindentation hardness mapping hints at a competing hardening–softening mechanism after compression and reveals the complementary effects of stress and structure modulation. Transmission electron microscopy proves that structure modulation and elastic heterogeneity distribution under room temperature deformation are related to shear band formation. Molecular dynamics simulations provide an atomistic understanding of the confined deformation mechanism in notched metallic glasses and the related fluctuations in the elastic and plastic strains. Thus, future focus should be given to stress modulation and elastic heterogeneity, which, together with structure modulation, may allow the design of metallic glasses with enhanced ductility and strain-hardening ability.
A nanostructure-dendrite composite was prepared by copper mold casting. X-ray diffraction, and scanning and transmission electron microscopies, reveal a microstructure comprising ultrafine-scale dendrites with hexagonal structure and a two-phase interdendritic matrix, consisting of nanocrystalline hexagonal and tetragonal phases. Room temperature compression tests show evident yielding and 6% plastic strain together with work hardening up to . These results indicate that composite materials based on hexagonal phases might be an alternative to composites containing body-centered cubic phase reinforcements.
The Invar effect is universally observed in Fe-based bulk metallic glasses. However, there is limited understanding on how this effect manifests at the atomic scale. Here, we use in-situ synchrotron-based high-energy X-ray diffraction to study the structural transformations of (Fe71.2B24Y4.8)96Nb4 and (Fe73.2B22Y4.8)95Mo5 bulk metallic glasses around the Curie temperature to understand the Invar effect they exhibit. The first two diffraction peaks shift in accordance with the macroscopically measured thermal expansion, which reveals the Invar effect. Additionally, the nearest-neighbor Fe–Fe pair distance correlates well with the macroscopic thermal expansion. In-situ X-ray diffraction is thus able to elucidate the Invar effect in Fe-based metallic glasses at the atomic scale. Here, we find that the Invar effect is not just a macroscopic effect but has a clear atomistic equivalent in the average Fe–Fe pair distance and also shows itself in higher-order atomic shells composed of multiple atom species.
Titanium alloys are commonly used as biomaterials in musculoskeletal applications, but their long‐term efficacy can be limited by wear and corrosion, stress shielding, and bacterial colonization. As a promising alternative, bulk metallic glasses (BMGs) offer superior strength and corrosion resistance, but the influence of their chemical composition on their bioactivity remains largely unexplored. This study, therefore, aims to examine how the surface chemistry of palladium (Pd)‐, platinum (Pt)‐, and titanium (Ti)‐based BMGs can steer their response to biological systems. The chemical composition of BMGs governs their thermophysical and mechanical properties, with Pd‐based BMGs showing exceptional glass‐forming ability suitable for larger implants, and all BMGs exhibiting a significantly lower Young's modulus than Ti‐6Al‐4 V (Ti64), suggesting a potential to reduce stress shielding. Although BMGs feature copper depletion at the near surface, their surface chemistry remains more stable than that of Ti64 and supports blood biocompatibility. Fibrin network formation is heavily dependent on BMGs’ chemical composition and Ti‐based BMGs support thicker fibrin network formation than Ti64. Furthermore, BMGs outperform Ti64 in promoting mineralization of human bone progenitor cells and demonstrate antimicrobial properties against Staphylococcus aureus in a surface chemistry‐dependent manner, thereby indicating their great potential as biomaterials for musculoskeletal applications.