Metallic glass composites with shape memory crystals show enhanced plasticity and work-hardening capability. We investigate the influence of various critical structural aspects such as, the density of crystalline precipitates, their distribution and size, and the structural features and intrinsic properties of the phase on the deformation behavior of metallic amorphous Cu Zr composites with B2 CuZr inclusions using molecular dynamics simulations. We find that a low density of small B2 inclusions with spacing smaller than the critical shear band length controls the formation and distribution of plastic zones in the composite and hinders the formation of critical shear bands. When the free path for shearing allows the formation of mature shear bands a high volume fraction of large B2 precipitates is necessary to stabilize the shear flow and avoid runaway instability. Additionally, we also investigate the deformation mechanism of composites with pure copper crystals for comparison, in order to understand the superior mechanical properties of metallic glass composites with shape memory crystals in more detail. The complex and competing mechanisms of deformation occurring in shape memory metallic glass composites allow this class of materials to sustain large tensile deformation, even though only a low-volume fraction of crystalline inclusions is present.
One way to rejuvenate metallic glasses is to increase their free volume. Here, by randomly removing atoms from the glass matrix, free volume is homogeneously generated in metallic glasses, and glassy states with different degrees of rejuvenation are designed and further mechanically tested. We find that the free volume in the rejuvenated glasses can be annihilated under tensile or compressive deformation that consequently leads to structural relaxation and strain-hardening. Additionally, the deformation mechanism of highly rejuvenated metallic glasses during the uniaxial loading–unloading tensile tests is investigated, in order to provide a systematic understanding of the relaxation and strain-hardening relationship. The observed strain-hardening in the highly rejuvenated metallic glasses corresponds to stress-driven structural and residual stress relaxation during cycling deformation. Nevertheless, the rejuvenated metallic glasses relax to a more stable state but could not recover their initial as-cast state.
Pre-plastic deformation (PPD) treatments on bulk metallic glasses (BMGs) have previously been shown to be helpful in producing multiple shear bands. In this work, the applicability of the PPD approach on BMGs with different Poisson’s ratios was validated based on experimental and simulation observations. It was found that for BMGs with high Poisson’s ratios (HBMGs, e.g., Zr56Co28Al16 and Zr46Cu46Al8), the PPD treatment can easily trigger a pair of large plastic deformation zones consisting of multiple shear bands. These PPD-treated HBMGs clearly display improved strength and compressive plasticity. On the other hand, the mechanical properties of BMGs with low Poisson’s ratios (LBMG, e.g., Fe48Cr15Mo14Y2C15B6) become worse due to a few shear bands and micro-cracks in extremely small plastic deformation zones. Additionally, for the PPD-treated HBMGs with similar high Poisson’s ratios, the Zr56Co28Al16 BMG exhibits much larger plasticity than the Zr46Cu46Al8 BMG. This phenomenon is mainly due to more defective icosahedral clusters in the Zr56Co28Al16 BMG, which can serve as nucleation sites for shear transformation zones (STZs) during subsequent deformation. The present study may provide a basis for understanding the plastic deformation mechanism of BMGs.