An asymmetric supercapacitor was prepared on a sheet of filter paper with two modified surfaces acting as electrodes in 1 M potassium hydroxide aqueous solution. By choosing carbon nanotubes and two different kinds of metal oxides (zinc oxide and ferro ferric oxide) as electrode materials, the asymmetric supercapacitor was successfully fabricated. The results showed that this device exhibited a wide potential window of 1.8 V and significantly improved electrochemical performances of its counterparts. Particularly, the one-sheet asymmetric supercapacitor demonstrated high energy density of 116.11 W h/kg and power density 27.48 kW/kg, which was attributed to the combined action and shortened distance between the two electrodes, respectively. Besides, it showed superior electrochemical cycling stability with 87.1% capacitance retention under room temperature. These outstanding results can not only give researchers new insights into compact energy storage systems, but they also provide a good prospect for flexible asymmetric supercapacitors.
Highly vertically aligned carbon nanotube arrays grown on the surface of pure titanium plates by chemical vapor deposition serve as substrates for electrodepositing polyaniline, thus fabricating three-dimensional carbon nanotube/polyaniline composites. In addition, X-ray diffraction and Raman spectroscopy are applied to investigate the structures of the as-prepared hybrids. Morphological analysis of the nanotube/polyaniline composites is performed by high resolution SEM and transmission electron microscopy. The combination of the three-dimensional carbon nanotube architecture and conducting polyaniline surprisingly generates a synergistic effect on electrochemical performance which is particularly important. Consequently, the vertically aligned carbon nanotube/polyaniline hybrids exhibit excellent characteristics in terms of specific capacitance (752.5 F g−1) and power density (5364 W kg−1) at a scanning rate of 100 mV s−1. Furthermore, the capacity retention can reach over 82% (after 10 000 cycles). This work highlights the critical role of the introduction of vertically laid carbon nanotubes with highly conducting polyaniline in improving the performance of supercapacitors.
We demonstrate a monolithic acousto-optic light modulator on silicon consisting of a piezoelectric microcavity (MC) excited by a surface acoustic wave (SAW). The modulation of the MC optical resonance by the SAW creates an optical grating on the MC, which efficiently diffracts light beams impinging at the Bragg angle.
As demand grows for high-sensitivity and high-selectivity gas sensors in the Internet of Things and environmental monitoring fields, metal oxide semiconductor gas sensors based on micro-hotplates have attracted significant research interest due to their low power consumption and high integration. While array designs can address the issue of low sensor selectivity, integrating multiple sensor elements may result in increased power consumption. To overcome this limitation, the paper proposes a novel multi-heater integrated micro-hotplate design based on thermal crosstalk, integrating multiple heaters on a single micro-hotplate to generate encodable multiple temperature areas. Through COMSOL finite element simulation, the effects of heater sizes, geometry, and thickness on the performance of the micro-hotplate were systematically studied. The results indicate that with a heater radius of 100 μm, the micro-hotplate exhibits excellent temperature uniformity at a working temperature of 300 °C, with more than 70% of the heating area having a temperature gradient of less than 10 °C. Additionally, the optimized heater geometry significantly reduces the mechanical deformation of the micro-hotplate, ensuring structural stability. Most notably, the thermal crosstalk effect effectively reduces the power consumption of the micro-hotplate. At a working temperature of 300 °C, the dual-heater design consumes approximately 4.68 mW less power than the single-heater configuration. By introducing an etched window design, the thermal efficiency of the micro-hotplate is further enhanced, with a peak temperature increase of approximately 40 °C. The innovative multi-heater micro-hotplate design based on thermal crosstalk achieves low-power temperature control across all heaters, laying a solid foundation for the development and widespread adoption of high-performance portable gas sensors.
Issues of sensor failure, data transmission interruption, and even power interruption can result in randomly piecewise missing of detection data of online instrumentation and measurement systems, which will lead to large detection errors and even wrong decisions in real-world scenarios. It has been posed as a critical problem for electronic noses, which have been widely studied as a gas/odor measurement system, as the accuracy of identification and quantification of target gases or odors is greatly dependent on the data acquisition from the sensor array. To address this issue, a novel electronic nose data recovery method based on spatiotemporal correlation is proposed and studied in this work. Specifically, a deep gated recurrent unit (GRU)-based time series model is devised to explore the potential time series relationships between the missing data and the historical data. Additionally, an extreme learning machine (ELM)-driven spatial correlation model is established to harness the inter-sensor correlations within the array. Finally, a weighted fusion of temporal and spatial correlation predictions is performed to obtain more accurate recovery data and lower gas detection errors. Experimental validation was conducted using a laboratory-built electronic nose system, which included the detection of peracetic acid concentrations at 0.5% and 0.4%. Experimental results demonstrate a significant improvement in the accuracy of gas concentration quantification when utilizing the proposed data recovery method. Compared to results obtained from random piecewise loss data, both the RMSE and MAE are reduced by at lease 50%. It is proved that the proposed approach is capable of effectively recovering data missing occurring simultaneously in the array, as well as continuous data missing across multiple time points.