Developing efficient metal‐nitrogen‐carbon (M‐N‐C) single‐atom catalysts for oxygen reduction reaction (ORR) is significant for the widespread implementation of Zn‐air batteries, while the synergic design of the matrix microstructure and coordination environment of metal centers remains challenges. Herein, a novel salt effect‐induced strategy is proposed to engineer N and P coordinated atomically dispersed Fe atoms with extra‐axial Cl on interlinked porous carbon nanosheets, achieving a superior single‐atom Fe catalyst (denoted as Fe‐NP‐Cl‐C) for ORR and Zn‐air batteries. The hierarchical porous nanosheet architecture can provide rapid mass/electron transfer channels and facilitate the exposure of active sites. Experiments and density functional theory (DFT) calculations reveal the distinctive Fe‐N2P2‐Cl active sites afford significantly reduced energy barriers and promoted reaction kinetics for ORR. Consequently, the Fe‐NP‐Cl‐C catalyst exhibits distinguished ORR performance with a half‐wave potential (E1/2) of 0.92 V and excellent stability. Remarkably, the assembled Zn‐air battery based on Fe‐NP‐Cl‐C delivers an extremely high peak power density of 260 mW cm−2 and a large specific capacity of 812 mA h g−1, outperforming the commercial Pt/C and most reported congeneric catalysts. This study offers a new perspective on structural optimization and coordination engineering of single‐atom catalysts for efficient oxygen electrocatalysis and energy conversion devices.
14 December 2022 in Journal of Colloid and Interface Science
Carbon dots (CDs) show great potential as a new type of oil-displacing agent for unconventional oil and gas development. However, the instability and easy aggregation epitomize the challenges that accompany the application of CDs in high temperature and high salinity (HT/HS) reservoirs. In this research, novel benzene sulfonate-modified carbon dots (BS-CDs) with remarkable thermal stability and salt resistance were fabricated through an in-situ electrochemical exfoliation method. Molecular simulation verifies that the introduction of benzene sulfonate groups substantially strengthens the electrostatic repulsion between BS-CDs, leading to outstanding dispersibility and stability even at a temperature of 100 °C and salinity of 14 × 104 mg/L. Core flooding tests show that 0.05 wt.% BS-CDs nanofluid can significantly reduce the water injection pressure by 50.00% and enhanced oil recovery (EOR) to 68.39% under HT/HS conditions. According to the atomic force microscopy (AFM) scanning results, the adhesion force between the core (after BS-CDs treatment) and oil decreased by 11.94 times, indicating that the hydrophilicity of the core surface was increased. In addition, the distribution of the adhesion force curve is more concentrated, which means that the micro-scale wettability of the core changes from oil-wet to more homogeneous water-wet. This study provides a feasible way for the development and application of good thermal stability and salt resistance CDs in unconventional reservoir development.
1 April 2021 in Journal of Colloid and Interface Science