Photocatalytic removal of organic pollution such as waste colored dyes was a promising technique for environment technique. However, effective photocatalysts were needed to enhance the photocatalytic efficiency. Ag/AgCl was regarded as high performance catalyst for photocatalytic degradation. Ag/AgCl nanoparticles were biochemically prepared with metabolin of living fungi which was used as reductant and characterized by X-Ray diffraction (XRD), UV-visible spectroscopy and transmission electron microscopy (TEM). The Ag/AgCl nanoparticle composites showed spherical aggregation shape with an average size of about 3–5 nm which is well inside the quantum regime. The UV-visible study showed that Ag/AgCl nanoparticles had strong visible light absorption and exhibited excellent visible-light-driven photocatalytic performance. Photocatalytic results indicated that the obtained Ag/AgCl nanoparticles were suitable for photocatalytic removal of RhB dye under visible light irradiation. The excellent photocatalytic activities could be attributed to the quantum size nanoparticles and the Plasmon resonance of Ag/AgCl composites.
A signal shut-off probe of Si, N-codoped carbon quantum dots (Si, N-CQDs) was exploited to detect Cr(VI) by fluorescence quenching without the aid of any biomolecules or labeling materials. The sensing system prepared the precursor of diacetone acrylamide and the silane coupling agent 3-aminopropyltriethoxysilane (KH-550) by a simple hydrothermal method, and the quantum yield is as high as 75% Si, N-CQDs. The fluorescence stability and microstructure of the Si, N-CQDs were studied. The Si, N-CQDs has a high sensitivity for detecting Cr(VI) with the linear range of 0–200 μM and the detection limit of 0.995 μM. The quenching mechanism of Si, N-CQDs is attributed to FRET.
Crosslinked liquid crystalline polymers (CLCPs) containing azobenzene (AZO-CLCPs) are a type of promising material due to their significance in the design of light-driven smart actuators. Developing AZO-CLCP composites by incorporating AZO-CLCPs with other materials is an effective way of enhancing their practicability. Herein, we report an AZO-CLCP/CNT nanocomposite prepared by the in situ polymerization of diacrylates containing azobenzene chromophores on carbon nanotube (CNT) sheets. The liquid crystal phase structure of CLCP matrix was evidenced by the two-dimensional X-ray scattering. The prepared pure AZO-CLCP films and AZO-CLCP/CNT nanocomposite films demonstrated strong reversible photo-triggered deformation under the irradiation of UV light at 366 nm of wavelength, as a result of photo-induced isomerization of azobenzene moieties in the polymer network. But compared to pure AZO-CLCP films, the AZO-CLCP/CNT nanocomposite films could much more rapidly return to their initial shapes after the UV light irradiation was removed due to the elasticity effect of CNT sheets. The deformation behavior of AZO-CLCP/CNT nanocomposite films under the light irradiation was also different from that of the pure AZO-CLCP films due to the interfacial interaction between a polymer network and CNT sheet. Furthermore, incorporation of a CNT sheet remarkably increased the mechanical strength and robustness of the material. We also used this AZO-CLCP/CNT nanocomposite as a microvalve membrane actuator, which can be controlled by light, for a conceptual device of a microfluidic system. The results showed that this AZO-CLCP/CNT nanocomposite may have great potential in smart actuator applications for biological engineering, medical treatment, environment detection and microelectromechanical systems (MEMS), etc.