Pore structures provide extra freedoms for the design of porous media, leading to desirable properties, such as high catalytic rate, energy storage efficiency, and specific strength. This unfortunately makes the porous media susceptible to failure. Deep understanding of the failure mechanism in microstructures is a key to customizing high-performance crack-resistant porous media. However, solving the fracture problem of the porous materials is computationally intractable due to the highly complicated configurations of microstructures. To bridge the structural configurations and fracture responses of random porous media, a unique generative deep learning model is developed. A two-step strategy is proposed to deconstruct the fracture process, which sequentially corresponds to elastic deformation and crack propagation. The geometry of microstructure is translated into a scalar of elastic field as an intermediate variable, and then, the crack path is predicted. The neural network precisely characterizes the strong interactions among pore structures, the multiscale behaviors of fracture, and the discontinuous essence of crack propagation. Crack paths in random porous media are accurately predicted by simply inputting the images of targets, without inputting any additional input physical information. The prediction model enjoys an outstanding performance with a prediction accuracy of 90.25% and possesses a robust generalization capability. The accuracy of the present model is a record so far, and the prediction is accomplished within a second. This study opens an avenue to high-throughput evaluation of the fracture behaviors of heterogeneous materials with complex geometries.
Structural metamaterial with negative Poisson’s ratio often has low stiffness due to its porous structure. For engineering applications, the various strategies have been developed to enhance its stiffness but also weaken the negative Poisson effect. In this work, we propose a 3D reinforced re-entrant structure (RRS) by adding arrow structures to the classical re-entrant structure (RS), which is fabricated by photocuring 3D printing of photosensitive resin. The structure-properties correlative mechanism of RRS is systematically analyzed by combining experiment (quasi-static compression experiment) and finite element simulation (ABAQUS). It is found that the equivalent elastic modulus and negative Poisson’s ratio of RRS can be tuned by various structural parameters (i.e. the thickness ratio η, the length ratio of the slant rod α, the length ratio of the vertical rod β, and the angle θ of the re-entrant cells). By optimizing the structure parameters, the equivalent elastic modulus of RRS with the negative Poisson’s ratio of −0.28 can be significantly increase to 13.67 MPa, which is 12.32 times larger than that of RS with the same negative Poisson’s ratio. Due to the flexible design of stiffness and negative Poisson ratio, our proposed 3D reinforced re-entrant structural metamaterial provides a potential way for designing engineering materials with desirable performance.
Magneto-sensitive polymer gel (MSPG) is a kind of ferromagnetic particle filled smart polymer composite, whose magneto-mechanical coupling mechanism has attracted increasing attention in recent years. In this work, the magneto-induced rheological response of MSPG under cyclic shear loading was investigated. It was found that magnetic field is the critical reason for the transition from stress softening to stress hardening under cyclic loading. Besides, the particle concentration and temperature are the controlling factors in the structure optimization of MSPG in the presence of magnetic field. The magneto-induced hardening mechanism was further proposed based on the related experimental results.
The rate-dependent effect of viscoelasticity plays a critical role in the hardening mechanisms of impact-hardening polymers (IHP) when forcefully impacted. In this study, we used dynamic mechanical analysis (DMA) to characterize the rate-dependent viscoelasticity of an IHP under oscillatory shear. We found that the storage modulus increased by three orders of magnitude within the experimental range when the oscillatory frequency varied from 0.1 to 100 rad/s. To further understand the real strain rate effect of IHP, we introduced the Havriliak-Negami (H–N) model to predict the dynamic viscoelastic behaviors of the IHP for a wider frequency range (from zero to infinity) than that applied in the DMA experiments. Based on the H–N model results, we defined a parameter to describe the rate-dependent effect of the IHP, which was not dependent on the frequency range and reflected the intrinsic material properties of IHP. We used the time-temperature superposition principle (TTSP), which extended the experimental range from 0.1 rad s−1 down to 0.005 rad s−1, to verify the accuracy of the rate-dependent viscoelasticity predicted by the H–N model. Finally, we outlined the influence of temperature on the dynamic viscoelastic behaviors of IHP and discussed the phase transition mechanism induced by temperature and the oscillatory frequency. The results presented here not only provide a method (i.e., by combining experimental results with the H–N model results) to characterize the real rate-dependent viscoelasticity of IHP but are also valuable to further our understanding of the impact-hardening mechanisms of IHP.