Coal-based porous materials for supercapacitors were successfully prepared using Taixi anthracite (TXA) by multi-stage activation. The characterization and electrochemical tests of activated carbons (ACs) prepared in different stages demonstrated that the AC from the third-stage activation (ACIII) shows good porous structures and excellent electrochemical performances. ACIII exhibited a fine specific capacitance of 199 F g−1 at a current density of 1 A g−1 in the three-electrode system, with 6 mol L−1 KOH as the electrolyte. The specific capacitance of ACIII remained 190 F g−1 even despite increasing the current density to 5 A g−1, indicating a good rate of electrochemical performance. Moreover, its specific capacitance remained at 98.1% of the initial value after 5000 galvanostatic charge-discharge (GCD) cycle tests at a current density of 1 A g−1, suggesting that the ACIII has excellent cycle performance as electrode materials for supercapacitors. This study provides a promising approach for fabricating high performance electrode materials from high-rank coals, which could facilitate efficient and clean utilization of high-rank coals.
One of the key factors to improve electrochemical properties is to find exceptional electrode materials. In this work, the nickel-cobalt layered double hydroxide (CNT@CoS/NiCo-LDH) with the structure of a hollow nanocage was prepared by etching CNT@CoS with zeolitic imidazolate framework-67 (ZIF-67) as a template. The results show that the addition of nickel has a great influence on the structure, morphology and chemical properties of materials. The prepared material CNT@CoS/NiCo-LDH-100 (C@CS/NCL-100) inherited the rhombic dodecahedral shape of ZIF-67 well and the CNTs were evenly interspersed among the rhombic dodecahedrons. The presence of CNTs improved the conductivity and surface area of the samples. The C@CS/NCL-100 demonstrates a high specific capacitance of 2794.6 F·g−1 at 1 A·g−1. Furthermore, as an assemble device, the device of C@CS/NCL-100 as a positive electrode exhibits a relatively high-energy density of 35.64 Wh·kg−1 at a power density of 750 W·kg−1 Further, even at the high-power density of 3750 W·kg−1, the energy density can still retain 26.38 Wh·kg−1. Hence, the superior performance of C@CS/NCL-100 can be ascribed to the synergy among CNTs, CoS and NiCo LDH, as well as the excellent three-dimensional structure obtained by used ZIF-67 as a template.