The magnitude and direction of the in-situ stress field significantly influence the Geodynamic disaster. Taking the Gaojiapu Coal Mine in the northwest Binchang mining area as the study area, the distribution law of the in-situ stress field and its relationship with microseismic events were analyzed and discussed through field geological investigation, in-situ measurement, and numerical simulation. The results show that: (1) The Maximum horizontal principal stress (MaxHPS) is mainly concentrated in the turning end of the fold, the axis of the syncline, the undulation end of the anticline, the footwall of the fault, and the two ends of the fault. (2) The MaxHPS in the footwall area of the fault is greater than that in the hanging wall area. (3) The MaxHPS at the axial part of the syncline is greater than that at the wing part, and the MaxHPS at the wing part is greater than that at the anticline. (4) In areas with high MaxHPS and Lateral pressure coefficient (LPC), the frequency of high-energy microseismic events is high. (5) The 105J high-energy microseismic events more easily occur in areas with MaxHPS greater than 38 MPa and LPC greater than 1.50.
One of the key factors to improve electrochemical properties is to find exceptional electrode materials. In this work, the nickel-cobalt layered double hydroxide (CNT@CoS/NiCo-LDH) with the structure of a hollow nanocage was prepared by etching CNT@CoS with zeolitic imidazolate framework-67 (ZIF-67) as a template. The results show that the addition of nickel has a great influence on the structure, morphology and chemical properties of materials. The prepared material CNT@CoS/NiCo-LDH-100 (C@CS/NCL-100) inherited the rhombic dodecahedral shape of ZIF-67 well and the CNTs were evenly interspersed among the rhombic dodecahedrons. The presence of CNTs improved the conductivity and surface area of the samples. The C@CS/NCL-100 demonstrates a high specific capacitance of 2794.6 F·g−1 at 1 A·g−1. Furthermore, as an assemble device, the device of C@CS/NCL-100 as a positive electrode exhibits a relatively high-energy density of 35.64 Wh·kg−1 at a power density of 750 W·kg−1 Further, even at the high-power density of 3750 W·kg−1, the energy density can still retain 26.38 Wh·kg−1. Hence, the superior performance of C@CS/NCL-100 can be ascribed to the synergy among CNTs, CoS and NiCo LDH, as well as the excellent three-dimensional structure obtained by used ZIF-67 as a template.
4 December 2024 in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
In the realm of deep earth engineering, increasing excavation depths present formidable challenges like heightened ground stress, permeability, temperatures, and disruptive excavation effects, posing significant safety risks. Scholars predominantly employ physical similarity simulations to authentically replicate these dynamic hazards encountered in deep earth engineering. This simulation necessitates addressing similarity theory challenges inherent in this domain, encompassing coal-rock dynamic similarity theory and multi-field, multi-phase coupled disaster-inducing similarity theory. Coal-rock dynamic similarity theory comprises stress field-dominated dynamic pressure and rock burst similarity theories. Meanwhile, multi-field, multi-phase coupled disaster-inducing similarity theory involves permeability field-dominated solid–gas coupling and solid–liquid coupling similarity theories. Building upon prior investigations, this paper reviews the current state of research in deep earth engineering similarity theory. It conducts a comparative analysis of similarity theories related to various disasters and outlines the developmental trajectory of deep earth engineering similarity theory. This review proposes focusing on elucidating the genesis mechanism of multi-field coupled dynamic disasters in deep earth engineering, studying the evolutionary patterns of multi-field coupled dynamic processes in these settings, deriving pivotal indicators for multi-field coupled dynamic disasters in deep ground engineering, and validating the similarity theory concerning multi-field coupled disaster induction in deep coal-rock masses.
Upper protective layer (UPL) mining is extensively utilised as a pressure relief strategy to prevent outbursts and coal bursts. However, when the excavation height of the protected layer is substantial, the depressurisation efficacy of the protective layer may be diminished. This paper takes the Haishiwan coal mine in China as a case study and explores the stress evolution and influencing factors in the mining of extra-thick coal seam beneath the protective layer through theoretical analysis, numerical simulation, and field observation. The results indicate that increasing the excavation height of the coal seam will lead to the upward development of the collapse zone in the overburden of the goaf, with the “masonry beam” structure formed at a higher position by key strata blocks. The overburden above the masonry beam will be supported by the coal rock masse on both sides of the structure, leading to increased stress on the coal seam near the goaf and eliminating the depressurisation effect of the protective layer. Numerical simulation shows that factors such as faults, protective layers, interlayer spacing, and the height of coal seam excavation significantly affect the stress distribution in the protected layer. With the increase in interlayer spacing and the thickness of coal seam extraction, the stress reduction phenomenon of the UPL gradually decreases, especially with an abnormal stress concentration of the gob-side coal seam. Observations of Surface subsidence and the distribution of mining-induced seismic events corroborate the conclusions of theoretical analysis and numerical simulations. The results offer valuable guidance for the mining of extra-thick coal seams and the selection of the UPL.