Maximiliano Méndez-López

Dr. Maximiliano Méndez-López

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 January 2025 in Molecules
Verified
Journal Article
Open access
PDF file
DHDomingo César Carrascal Hernández
Domingo César Carrascal Hernández
Carlos David Grande TovarCarlos David Grande Tovar
Carlos David Grande Tovar
Maximiliano Méndez-LópezMaximiliano Méndez-López
Maximiliano Méndez-López
DIDaniel Insuasty
Daniel Insuasty
SGSamira García-Freites
Samira García-Freites
EMEdgar Márquez
Edgar Márquez
The greenhouse effect and global warming, driven by the accumulation of pollutants, such as sulfur oxides (SOx), nitrogen oxides (NOx), and CO2, are primarily caused by the combustion of fossil fuels and volcanic eruptions. These phenomena represent an international crisis that negatively impacts human health and the environment. Several studies have reported novel carbon capture, utilization, and storage (CCUS) technologies, promising solutions. Notable methods include chemical absorption using solvents, and the development of functionalized porous materials, such as MCM-41, impregnated with amines like polyethyleneimine. These technologies have demonstrated high capture capacity and thermal stability; however, they face challenges related to recyclability and high operating costs. In parallel, biodegradable polymers and hydrogels present sustainable alternatives with a lower environmental impact, although their industrial scalability remains limited. This review comprehensively analyzes CO2 capture methods, focusing on silica-based porous supports, polymers, hydrogels, and emerging techniques, like CCUS and MOFs, while including traditional methods and a bibliometric analysis to update the field’s scientific dynamics. With increasing investigations focused on developing new CCUS technologies, this study highlights a growing interest in eco-friendly alternatives. A bibliometric analysis of 903 articles published between 2010 and 2024 provides an overview of current research on environmentally friendly carbon capture technologies. Countries such as the United States, the United Kingdom, and India are leading research efforts in this field, emphasizing the importance of scientific collaboration. Despite these advancements, implementing these technologies in industrial sectors with high greenhouse gas emissions remains scarce. This underscores the need for public policies and financing to promote their development and application in these sectors. Future research should prioritize materials with high capture capacity, efficient transformation, and valorization of CO2 while promoting circular economy approaches and decarbonizing challenging sectors, such as energy and transportation. Integrating environmentally friendly materials, energy optimization, and sustainable strategies is essential to position these technologies as key tools in the fight against climate change.

17 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
LALeonardo Anchique
Leonardo Anchique
Jackson J. AlcázarJackson J. Alcázar
Jackson J. Alcázar
AHAndrea Carolina Ramos Hernández
Andrea Carolina Ramos Hernández
Maximiliano Méndez-LópezMaximiliano Méndez-López
Maximiliano Méndez-López
JMJose R Mora
Jose R Mora
EMEdgar Márquez
Edgar Márquez
The occurrence, persistence, and accumulation of antibiotics and non-steroidal anti-inflammatory drugs (NSAIDs) represent a new environmental problem due to their harmful effects on human and aquatic life. A suitable absorbent for a particular type of pollutant does not necessarily absorb other types of compounds, so knowing the compatibility between a particular pollutant and a potential absorbent before experimentation seems to be fundamental. In this work, the molecular interactions between some pharmaceuticals (amoxicillin, ibuprofen, and tetracycline derivatives) with two potential absorbers, chitosan and graphene oxide models (pyrene, GO-1, and coronene, GO-2), were studied using the ωB97X-D/6-311G(2d,p) level of theory. The energetic interaction order found was amoxicillin/chitosan > amoxicillin/GO-1 > amoxicillin/GO-2 > ibuprofen/chitosan > ibuprofen/GO-2 > ibuprofen/GO-1, the negative sign for the interaction energy in all complex formations confirms good compatibility, while the size of Eint between 24–34 kcal/mol indicates physisorption processes. Moreover, the free energies of complex formation were negative, confirming the spontaneity of the processes. The larger interaction of amoxicillin Gos, compared to ibuprofen Gos, is consistent with previously reported experimental results, demonstrating the exceptional predictability of these methods. The second-order perturbation theory analysis shows that the amoxicillin complexes are mainly driven by hydrogen bonds, while van der Waals interactions with chitosan and hydrophobic interactions with graphene oxides are modelled for the ibuprofen complexes. Energy decomposition analysis (EDA) shows that electrostatic energy is a major contributor to the stabilization energy in all cases. The results obtained in this work promote the use of graphene oxides and chitosan as potential adsorbents for the removal of these emerging pollutants from water.

15 April 2024 in ACS Omega
Verified
Journal Article
Open access
DIDaniel Insuasty
Daniel Insuasty
MMMario Mutis
Mario Mutis
JTJorge Trilleras
Jorge Trilleras
LRLuis Alberto Illicachi Romero
Luis Alberto Illicachi Romero
JRJuan David Rodriguez
Juan David Rodriguez
EMEdgar Márquez
Edgar Márquez
In this article, three unsymmetrical 7-(diethylamino)quinolone chalcones with D-π-A-D and D-π-A-π-D type push-pull molecular arrangements were synthesized via a Claisen-Schmidt reaction. Using 7-(diethylamino)quinolone and vanillin as electron donor (D) moieties, these were linked together through the α,β-unsaturated carbonyl system acting as a linker and an electron acceptor (A). The photophysical properties were studied, revealing significant Stokes shifts and strong solvatofluorochromism caused by the ICT and TICT behavior produced by the push-pull effect. Moreover, quenching caused by the population of the TICT state in THF-H2O mixtures was observed, and the emission in the solid state evidenced a red shift compared to the emission in solution. These findings were corroborated by density functional theory (DFT) calculations employing the wb97xd/6-311G(d,p) method. The cytotoxic activity of the synthesized compounds was assessed on BHK-21, PC3, and LNCaP cell lines, revealing moderate activity across all compounds. Notably, compound 5b exhibited the highest activity against LNCaP cells, with an LC50 value of 10.89 μM. Furthermore, the compounds were evaluated for their potential as imaging agents in living prostate cells. The results demonstrated their favorable cell permeability and strong emission at 488 nm, positioning them as promising candidates for cancer cell imaging applications.

1 February 2026 in Gels
Verified
Journal Article
Open access
PDF file
DHDomingo César Carrascal Hernández
Domingo César Carrascal Hernández
Carlos David Grande TovarCarlos David Grande Tovar
Carlos David Grande Tovar
DIDaniel Insuasty
Daniel Insuasty
EMEdgar Márquez
Edgar Márquez
Maximiliano Méndez-LópezMaximiliano Méndez-López
Maximiliano Méndez-López
Click chemistry is highly valued in the design of polymeric biomaterials due to its ability to generate complex structures and localized surface modifications. However, prominent mechanisms in click chemistry, such as copper-catalyzed azide-alkyne cycloaddition (CuAAC), are inefficient for the synthesis and/or modification of biomaterials because they present significant limitations for in vivo applications. The presence of residual copper in the material is toxic and requires extensive purification, increasing production costs and hindering scalability and availability for in vivo applications. To overcome these limitations and ensure the safety and biocompatibility of materials, biorthogonal reactions such as strain-promoted azide-alkyne cycloaddition (SPAAC) have been developed. Thiol-ene/thiol-yne and Diels–Alder mechanisms are also relevant for the formation of robust polymer networks with specific characteristics and attractive advantages for generating biocompatible materials. These reactions not only improve cell integration and reduce fibrosis in in vivo applications but also enable the creation of functional structures for tissue regeneration. This review provides a comprehensive analysis of advances in the synthesis of biomaterials for tissue regeneration using hydrogels designed via click chemistry, as well as the various mechanisms and structural considerations.

5 June 2024 in Gels
Verified
Journal Article
Open access
PDF file
DCDomingo Cesar Carrascal-Hernandez
Domingo Cesar Carrascal-Hernandez
Maximiliano Méndez-LópezMaximiliano Méndez-López
Maximiliano Méndez-López
DIDaniel Insuasty
Daniel Insuasty
SGSamira García-Freites
Samira García-Freites
MSMarco Sanjuan
Marco Sanjuan
EMEdgar Márquez
Edgar Márquez
In this research, we explore the potential of employing density functional theory (DFT) for the design of biodegradable hydrogels aimed at capturing carbon dioxide (CO2) and mitigating greenhouse gas emissions. We employed biodegradable hydrogel models, including polyethylene glycol, polyvinylpyrrolidone, chitosan, and poly-2-hydroxymethacrylate. The complexation process between the hydrogel and CO2 was thoroughly investigated at the ωB97X-D/6-311G(2d,p) theoretical level. Our findings reveal a strong affinity between the hydrogel models and CO2, with binding energies ranging from −4.5 to −6.5 kcal/mol, indicative of physisorption processes. The absorption order observed was as follows: chitosan > PVP > HEAC > PEG. Additionally, thermodynamic parameters substantiated this sequence and even suggested that these complexes remain stable up to 160 °C. Consequently, these polymers present a promising avenue for crafting novel materials for CO2 capture applications. Nonetheless, further research is warranted to optimize the design of these materials and assess their performance across various environmental conditions.

19 March 2025 in Molecules
Verified
Journal Article
Open access
PDF file
ARAna Y. Rojas-Forero
Ana Y. Rojas-Forero
LHLaura Y. Hernández-Benítez
Laura Y. Hernández-Benítez
MOMaría L. Liliana Ospina-Castro
María L. Liliana Ospina-Castro
NGNataly Galan-Freyle
Nataly Galan-Freyle
JCJohn R Castro-Suarez
John R Castro-Suarez
LPLeonardo Pacheco-Londoño
Leonardo Pacheco-Londoño
A hybrid material composed of IRMOF-3 and ZnO (IRMOF-3/ZnO) was synthesized to enhance photocatalytic methylene blue (MB) degradation under visible-light irradiation. Scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and diffuse-reflectance UV-Vis analyses confirmed the successful integration of ZnO into the IRMOF-3 framework. Compared with unmodified IRMOF-3, the hybrid demonstrated superior MB decomposition, as evidenced by faster reaction rate constants and shorter half-lives. Monitoring the MB absorbance at 670 nm (λmax) revealed more pronounced colorant removal when IRMOF-3/ZnO was exposed to a visible-light source. Diffuse-reflectance UV-Vis spectroscopy showed that IRMOF-3 has a band gap of 2.7 eV, whereas IRMOF-3/ZnO exhibits a slightly higher band gap of 2.8 eV. This modest shift, coupled with the strong interaction between the ZnO semiconductor and the MOF’s amine functionalities, enabled two distinct energy-transfer pathways: intermolecular transfer from IRMOF-3 linkers (acting as visible-light antennas) to ZnO, and intramolecular transfer from Zn to IRMOF-3. Together, these pathways generated abundant free radicals for efficient dye degradation. Despite the necessity for careful synthesis protocols and control of operating conditions to preserve the MOF structure and optimize ZnO loading, the IRMOF-3/ZnO hybrid shows promise as a robust, cost-effective photocatalyst for water-pollutant remediation, taking advantage of the more abundant visible region of solar light.