In order to simulate a circuit by applying various logic circuits and full chip using the HSPICE model, which can consider electrical coupling proposed in the previous research, it is investigated whether additional electrical coupling other than electrical coupling by top and bottom layer exists. Additional electrical coupling were verified through device simulation and confirmed to be blocked by heavily doped source/drain. Comparing the HSPICE circuit simulation results using the newly proposed monolithic 3D NAND (M3DNAND) structure in the technology computer-aided design (TCAD) mixed-mode and monolithic 3D inverter (M3DINV) unit cell model was once more verified. It is possible to simulate various logic circuits using the previously proposed M3DINV unit cell model. We simulated the operation and performances of M3DNAND, M3DNOR, 2 × 1 multiplexer (MUX), D flip-flop (D-FF), and static random access memry (SRAM).
The junctionless field-effect transistor (JLFET) compact model using the model parameters extracted from the LETI-UTSOI (version 2.1) model was proposed to perform circuit simulation considering the electrical coupling between the stacked JLFETs of a monolithic 3D integrated circuit (M3DIC) composed of JLFETs (M3DIC-JLFET). We validated the model by extracting the model parameters and comparing the simulation results of the technology computer-aided design and the Synopsys HSPICE circuit simulator. The performance of the M3DIC-JLFET was compared with that of the M3DIC composed of MOSFETs (M3DIC-MOSFET). The performance of a fan-out-3 ring oscillator with M3DIC-JLFET varied by less than 3% compared to that with M3DIC-MOSFET. The performances of ring oscillators of M3DIC-JLFET and M3DIC-MOSFET were almost the same. We simulated the performances of M3DICs such as an inverter, a NAND, a NOR, a 2 × 1 multiplexer, and a D flip-flop. The overall performance of the M3DIC-MOSFET was slightly better than that of the M3DIC-JLFET.
We have simulated a monolithic three-dimensional inverter (M3DINV) structure by considering the interfacial trap charges generated thermally during the monolithic three-dimensional integration process. We extracted the SPICE model parameters from M3DINV structures with two types of inter-layer dielectric thickness TILD (=10,100 nm) using the extracted interface trap charge distribution of the previous study. Logic circuits, such as inverters (INVs), ring oscillators (ROs), a 2 to 1 multiplexer (MUX), and D flip-flop and 6-transistor static random-access memory (6T SRAM) containing M3DINVs, were simulated using the extracted model parameters, and simulation results both with and without interface trap charges were compared. The extracted model parameters reflected current reduction, threshold voltage increase, and subthreshold swing (SS) degradation due to the interface trap charge. HSPICE simulation results of the fanout-3 (FO3) ring oscillator considering the interface trap charges showed a 20% reduction in frequency and a 30% increase in propagation delay compared to those without the interface trap charges. The propagation delays of the 2 × 1 MUX and D flip-flop with the interface trap charges were approximately 78.2 and 39.6% greater, respectively, than those without the interface trap charges. The retention static noise margin (SNM) of the SRAM increased by 16 mV (6.4%) and the read static noise margin (SNM) of SRAM decreased by 43 mV (35.8%) owing to the interface trap charge. The circuit simulation results revealed that the propagation delay increases owing to the interface trap charges. Therefore, it is necessary to fully consider the propagation delay of the logic circuit due to the generated interface trap charges when designing monolithic 3D integrated circuits.
In this paper, we investigated the electrical coupling between the top and bottom transistors in a monolithic 3-dimensional (3D) inverter (M3INV) stacked vertically with junctionless field-effect transistor (JLFET), which is one of candidates to replace metal-oxide-semiconductor field-effect transistors (MOSFET). Currents, transconductances, and gate capacitances of the top N-type transistor at the different gate voltages of the bottom P-type transistor as a function of thickness of inter-layer dielectric (TILD) and gate channel length (Lg) are simulated using technology computer-aided-design (TCAD). In M3INV stacked vertically with MOSFET (M3INV-MOS) and JLFET (M3INV-JL), the variations of threshold voltage, transconductance, and capacitance increase as TILD decreases and they increase as Lg increases, and thus there is a strong coupling in M3INV at the range of TILD ≤ 30 nm. In M3INV, the coupling between stacked JLFETs in M3INV-JL is larger than that between MOSFETs in M3INV-MOS at the same TILD and Lg. The switching threshold voltage (Vm) and noise margins (NMs) of M3INV are calculated from the voltage transfer characteristics (VTC) simulated with TCAD mixed-mode. As the gate lengths of M3INV-MOS and M3INV-JL increase, the Vm variations increase and decrease, respectively. The smaller the gate lengths of M3INV-NOS and M3INV-JL, the larger and smaller the variation of Vm, respectively. The noise margin of M3INV-MOS is larger and better for inverter characteristics than one of M3INV-JL. M3INV-MOS has less electrical coupling than M3INV-JL.
Dependence of the color tunability on the metal free Phthalocyanine (H2Pc) layer thickness in DC-voltage-driven organic light-emitting diodes (OLEDs) was investigated. A H2Pc layer was employed as a blue/red emission layer, which was prepared on an Alq3 green emission layer. The thickness of the H2Pc layer varied from 5 to 30 nm, with a step of 5 nm. The fabricated color-tunable OLEDs (CTOLEDs) were subjected to a thermal treatment layer for 2 min at a temperature of 120 °C to improve the interface properties, especially between H2Pc and Alq3. The current density–voltage–luminance characteristics and Commission Internationale de L’Eclairage (CIE) coordinates of the CTOLEDs with and without thermal treatment were measured, and their energy band diagrams were analyzed with respect to the H2Pc thin film thicknesses. In addition, the recombination rates at the interfaces between the hole transport layer and Alq3 and the H2Pc/electron transport layer of the CTOLEDs with and without thermal treatment were theoretically investigated using a technology–computer-aided design (TCAD) program. The experimental and theoretical results showed that the emission color temperature from cool white to warm white at a low voltage can be controlled by adjusting the thickness of the H2Pc layer in the CTOLED. It was verified that the thermally treated H2Pc thin film layer acted as a barrier that prevented electrons from being transferred to the Alq3 at low applied voltages, resulting in white color emission with temperature tunability. The CTOLED with a 20 nm of H2Pc layer demonstrated the best stable interface state and stability, resulting in the lowest driving voltage, relatively high luminance, and optimal light emission uniformity, respectively.
A DC voltage-dependent color-tunable organic light-emitting diode (CTOLED) was proposed for lighting applications. The CTOLED consists of six consecutive organic layers: the hole injection layer, the hole transport layer (HTL), two emission layers (EMLs), a hole blocking layer (HBL), and an electron transport layer (ETL). Only one metal-free phthalocyanine (H2Pc) layer with a thickness of 5 nm was employed as the EML in the CTOLED on a green organic light-emitting diode (OLED) structure using tris (8-hydroxyquinoline) aluminum (III) (Alq3). The current density-voltage-luminance characteristics of the CTOLEDs before and after thermal treatment were characterized and analyzed. Several Gaussian peaks were also extracted by multipeak fitting analysis of the electroluminescent spectra. In the CTOLED before thermal treatment, green emission was dominant in the entire voltage range from low to high voltages, and blue and infrared were emitted simultaneously and at relatively low intensities at low and high voltages, respectively. In the CTOLED after thermal treatment, the dominant color conversion from blue to green was observed as the applied voltage increased, and the infrared emission was relatively low over the entire voltage range. By simulating the CTOLED with and without traps at the H2Pc interface using a technology computer-aided design simulator, we observed the following: 1. After thermal treatment, the CTOLED emitted blue light by exciton generation at the H2Pc–HBL interface because of the small electron transport through the H2Pc thin film due to the dramatic reduction of traps in the low-voltage regime. 2. In the high-voltage regime, electrons reaching the HBL were transferred to Alq3 by resonant tunneling in two quantum wells; thus, green light was emitted by exciton generation at the HTL–Alq3 interface.