Solid waste management needs re-evaluating in developing countries like Pakistan, which currently employs landfilling as a first option. Over time, increasing population will result in decreasing space for landfill sites, ultimately increasing the cost of landfilling, while increasing accumulated waste will cause pollution. Locating and preparing a sanitary landfill includes the securing of large sectors and also everyday activity with the end goal to limit potential negative impacts. Energy production from municipal solid waste (MSW) is a perceptive idea for large cities, such as Karachi, as waste, which is an undesirable output that adds to land and air pollution, is transformed into a vital source of energy. The current study strives to provide a destination to solid waste by evaluating the energy potential that waste provides for power generation by the process of incineration. A sustainable energy generation plant based on the Rankine cycle is proposed. This study evaluates the various landfill sites in the case study area to determine their sustainability for a waste to energy (WtE) plant. The implementation of the proposed plant will not only provide an ultimate destination to waste but also generate 121.9 MW electricity at 25% plant efficiency. Thus, the generated electricity can be used to run a WtE plant and meet the energy requirements of the residents.

The complexity of removing boron compounds from aqueous systems has received serious attention among researchers and inventors in the water treating industry. This is due to the higher level of boron in the aquatic ecosystem, which is caused by the geochemical background and anthropogenic factors. The gradual increase in the distribution of boron for years can become extremely toxic to humans, terrestrial organisms and aquatic organisms. Numerous methods of removing boron that have been executed so far can be classified under batch adsorption, membrane-based processes and hybrid techniques. Conventional water treatments such as coagulation, sedimentation and filtration do not significantly remove boron, and special methods would have to be installed in order to remove boron from water resources. The blockage of membrane pores by pollutants in the available membrane technologies not only decreases their performance but can make the membranes prone to fouling. Therefore, the surface-modifying flexibility in adsorptive membranes can serve as an advantage to remove boron from water resources efficiently. These membranes are attractive because of the dual advantage of adsorption/filtration mechanisms. Hence, this review is devoted to discussing the capabilities of an adsorptive membrane in removing boron. This study will mainly highlight the issues of commercially available adsorptive membranes and the drawbacks of adsorbents incorporated in single-layered adsorptive membranes. The idea of layering adsorbents to form a highly adsorptive dual-layered membrane for boron removal will be proposed. The future prospects of boron removal in terms of the progress and utilization of adsorptive membranes along with recommendations for improving the techniques will also be discussed further.

Over the last few decades, steady growth in desalination literature has been observed. However, conducting a quantitative analysis of this literature is still a novelty. This study aimed at carrying out a quantitative analysis of desalination literature published during the last 30 years, using bibliometric and content analysis techniques, based on the Web of Science database. The bibliometric analysis revealed that desalination has received much attention after the year 2000, as 95.4% of literature has been published in two decades after 2000. The text mining analysis showed that the hot themes of desalination research are reverse osmosis optimization, graphene implications, interfacial polymerization, capacitive deionization, carbon nanotube implications, and antifouling techniques. Furthermore, it was observed that many desalination technologies have emerged recently that make it a challenge to choose the right desalination technology for industrialization. Therefore, this study also contributed to identifying the factors that are important for the industrialization of desalination technologies and, based on these identified factors, this study has compared different desalination technologies to unearth the energy-efficient and low production cost technology. Analytical hierarchy process was used for comparing existing desalination technologies based on eight different parameters and it demonstrated that reverse osmosis is the best available technology for desalination.