Glacier melting is one of the important causes of glacier morphology change and can provide basic parameters for calculating glacier volume change and glacier mass balance, which, in turn, is important for evaluating water resources. However, it is difficult to obtain large-scale time series of glacier changes due to the cloudy and foggy conditions which are typical of mountain areas. Gravity-measuring satellites and laser altimetry satellites can monitor changes in glacier volume over a wide area, while synthetic-aperture radar satellites can monitoring glacier morphology with a high spatial and temporal resolution. In this article, an interferometric method using a short temporal baseline and a short spatial baseline, called the Small Baseline Subsets (SBAS) Interferometric Synthetic-Aperture Radar (InSAR) method, was used to study the average rate of glacier deformation on Karlik Mountain, in the Eastern Tienshan Mountains, China, by using 19 Sentinel-1A images from November 2017 to December 2018. Thus, a time series analysis of glacier deformation was conducted. It was found that the average glacier deformation in the study region was −11.77 ± 9.73 mm/year, with the observation sites generally moving away from the satellite along the Line of Sight (LOS). Taking the ridge line as the dividing line, it was found that the melting rate of southern slopes was higher than that of northern slopes. According to the perpendicular of the mountain direction, the mountain was divided into an area in the northwest with large glaciers (Area I) and an area in the southeast with small glaciers (Area II). It was found that the melting rate in the southeast area was larger than that in the northwest area. Additionally, through the analysis of temperature and precipitation data, it was found that precipitation played a leading role in glacier deformation in the study region. Through the statistical analysis of the deformation, it was concluded that the absolute value of deformation is large at elevations below 4200 m while the absolute value of the deformation is very small at elevations above 4500 m; the direction of deformation is always away from the satellite along the LOS and the absolute value of glacier deformation decreases with increasing elevation.

Although vegetation index time series from optical images are widely used for crop mapping, it remains difficult to obtain sufficient time-series data because of satellite revisit time and weather in some areas. To address this situation, this paper considered Wen County, Henan Province, Central China as the research area and fused multi-source features such as backscatter coefficient, vegetation index, and time series based on Sentinel-1 and -2 data to identify crops. Through comparative experiments, this paper studied the feasibility of identifying crops with multi-temporal data and fused data. The results showed that the accuracy of multi-temporal Sentinel-2 data increased by 9.2% compared with single-temporal Sentinel-2 data, and the accuracy of multi-temporal fusion data improved by 17.1% and 2.9%, respectively, compared with multi-temporal Sentinel-1 and Sentinel-2 data. Multi-temporal data well-characterizes the phenological stages of crop growth, thereby improving the classification accuracy. The fusion of Sentinel-1 synthetic aperture radar data and Sentinel-2 optical data provide sufficient time-series data for crop identification. This research can provide a reference for crop recognition in precision agriculture.

The geological environment damage caused by coal mining subsidence has become an important factor affecting the sustainable development of mining areas. Reconstruction of the Coal Mining Subsidence Field (CMSF) is the key to preventing geological disasters, and the needs of CMSF reconstruction cannot be met by solely relying on a single remote sensing technology. The combination of Unmanned Aerial Vehicle (UAV) and Synthetic Aperture Radar (SAR) has complementary advantages; however, the data fusion strategy by refining the SAR deformation field through UAV still needs to be updated constantly. This paper proposed a Prior Weighting (PW) method based on Satellite Aerial (SA) heterogeneous remote sensing. The method can be used to fuse SAR and UAV Light Detection and Ranging (LiDAR) data for ground subsidence parameter inversion. Firstly, the subsidence boundary of Differential Interferometric SAR (DInSAR) combined with the large gradient subsidence of Pixel Offset Tracking (POT) was developed to initialize the SAR preliminary CMSF. Secondly, the SAR preliminary CMSF was refined by UAV LiDAR data; the weights of SAR and UAV LiDAR data are 0.4 and 0.6 iteratively. After the data fusion, the subsidence field was reconstructed. The results showed that the overall CMSF accuracy improved from ±144 mm to ±51 mm. The relative errors of the surface subsidence factor and main influence angle tangent calculated by the physical model and in situ measured data are 1.3% and 1.7%. It shows that the proposed SAR/UAV fusion method has significant advantages in the reconstruction of CMSF, and the PW method contributes to the prevention and control of mining subsidence.

Coal mining in the Loess Plateau can very easily generate ground cracks, and these cracks can immediately result in ventilation trouble under the mine shaft, runoff disturbance, and vegetation destruction. Advanced UAV (Unmanned Aerial Vehicle) high-resolution mapping and DL (Deep Learning) are introduced as the key methods to quickly delineate coal mining ground surface cracks for disaster prevention. Firstly, the dataset named the Ground Cracks of Coal Mining Area Unmanned Aerial Vehicle (GCCMA-UAV) is built, with a ground resolution of 3 cm, which is suitable to make a 1:500 thematic map of the ground crack. This GCCMA-UAV dataset includes 6280 images of ground cracks, and the size of the imagery is 256 × 256 pixels. Secondly, the DRA-UNet model is built effectively for coal mining ground surface crack delineation. This DRA-UNet model is an improved UNet DL model, which mainly includes the DAM (Dual Dttention Dechanism) module, the RN (residual network) module, and the ASPP (Atrous Spatial Pyramid Pooling) module. The DRA-UNet model shows the highest recall rate of 77.29% when the DRA-UNet was compared with other similar DL models, such as DeepLabV3+, SegNet, PSPNet, and so on. DRA-UNet also has other relatively reliable indicators; the precision rate is 84.92% and the F1 score is 78.87%. Finally, DRA-UNet is applied to delineate cracks on a DOM (Digital Orthophoto Map) of 3 km² in the mining workface area, with a ground resolution of 3 cm. There were 4903 cracks that were delineated from the DOM in the Huojitu Coal Mine Shaft. This DRA-UNet model effectively improves the efficiency of crack delineation.

Crop phenotype observation techniques via UAV (unmanned aerial vehicle) are necessary to identify different winter wheat cultivars to better realize their future smart productions and satisfy the requirement of smart agriculture. This study proposes a UAV-based hyperspectral remote sensing system for the fine classification of different winter wheat cultivars. Firstly, we set 90% heading overlap and 85% side overlap as the optimal flight parameters, which can meet the requirements of following hyperspectral imagery mosaicking and spectral stitching of different winter wheat cultivars areas. Secondly, the mosaicking algorithm of UAV hyperspectral imagery was developed, and the correlation coefficient of stitched spectral curves before and after mosaicking reached 0.97, which induced this study to extract the resultful spectral curves of six different winter wheat cultivars. Finally, the hyperspectral imagery dimension reduction experiments were compared with principal component analysis (PCA), minimum noise fraction rotation (MNF), and independent component analysis (ICA); the winter wheat cultivars classification experiments were compared with support vector machines (SVM), maximum likelihood estimate (MLE), and U-net neural network ENVINet5 model. Different dimension reduction methods and classification methods were compared to get the best combination for classification of different winter wheat cultivars. The results show that the mosaicked hyperspectral imagery effectively retains the original spectral feature information, and type 4 and type 6 winter wheat cultivars have the best classification results with the classification accuracy above 84%. Meanwhile, there is a 30% improvement in classification accuracy after dimension reduction, the MNF dimension reduction combined with ENVINet5 classification result is the best, its overall accuracy and Kappa coefficients are 83% and 0.81, respectively. The results indicate that the UAV-based hyperspectral remote sensing system can potentially be used for classifying different cultivars of winter wheat, and it provides a reference for the classification of crops with weak intra-class differences.