This study evaluates how elevated temperatures can affect the properties of concrete prepared with steel slag as a coarse aggregate. Four slag-based concrete mixtures were studied, using different types of cement pastes prepared with portland cement, fly ash as a 20% replacement of portland cement, and polypropylene fibers at 0.1% by volume, respectively; an additional dolomite-based reference mixture with portland cement served as a reference mixture. The test samples, which were prepared and aged for 56 days, were subjected to temperatures from 100 to 800°C. The residual mechanical properties of the cooled samples (i.e., their compressive strength and static modulus of elasticity), as well as their weight loss and residual ultrasonic pulse velocity, were determined and compared with those of the reference concrete. Additionally, scanning electron microscope analysis of the concretes and dilatometrical analysis of the cement pastes and aggregates were performed. The obtained results showed that t...
1 July 2018 in Journal of Environmental Management
Old metallurgical dumps across Europe represent a loss of valuable land and a potential threat to the environment, especially to groundwater (GW). The Javornik electric arc furnace (EAF) and ladle slag heap, situated in Slovenia, was investigated in this study. The environmental impact of the slag heap was evaluated by combining leaching characterization tests of landfill samples and geochemical modelling. It was shown that throughout the landfill the same minerals and sorptive phases control the leaching of elements of potential concern, despite variations in chemical composition. Although carbonation of the disposed steel slags occurred (molar ratio CO3/(Ca+Mg) = 0.53) relative to fresh slag, it had a limited effect on the leaching behaviour of elements of potential concern. The leaching from the slag heaps had also a limited effect on the quality of the GW. A site-specific case, however, was that leachates from the slag heap were strongly diluted, since a rapid flow of GW fed from the nearby Sava River was observed in the landfill area. The sampling and testing approach applied provides a basis for assessing the long-term impact of release and is a good starting point for evaluating future management options, including beneficial uses for this type of slag.
Heavy metal abundance and potential environmental risks are reported for surface sediments (n = 21) from the Port of Koper area, Republic of Slovenia. The enrichment factor (EF) indicates minor enrichment in arsenic (As), cadmium (Cd), copper (Cu), molybdenum (Mo), lead (Pb), antimony (Sb), and zinc (Zn), moderately to severely enriched with nickel (Ni). The trace metal chemistries, in the context of sediment quality guidelines (SQG), imply adverse threshold effect concentrations (TEC) and probable effect concentrations (PEC), for Ni only. Sediment sequential leaching experiments demonstrated that the majority of heavy metals were of natural lithogenic origin and low bioavailability. The heavy metals’ potential for “Risk Assessment Code” values exhibited no or low anthropogenic environmental burden, with the exception of Mo.
Temperature control is the primary concern during the design and construction process of mass concrete structures. As the concrete production has an enormous negative environmental impact, the development of green mass concretes will eventually become as important as the thermal characteristics. Therefore, this paper investigates the use of Electric Arc Furnace (EAF) steel slag aggregate for the partial replacement of the natural aggregate in the production of mass concrete. The impact of EAF steel aggregate on mass concrete workability, strength, and thermal behaviour was analysed. In addition, a cradle-to-gate LCA study was conducted to evaluate the environmental footprint and sustainability potential of the tested mass concrete mixtures. The study results suggest that the use of EAF steel slag aggregate in combination with a low-heat cement with a high content of blast furnace slag can significantly lower the temperature, reduce the environmental impact, and increase the sustainability potential of mass concrete, while at the same time providing sufficient workability and compressive strength. The study results indicate that EAF steel slag can be upcycled into an aggregate for the production of green mass concrete mixtures.