Quasi-one-dimensional structures from metal oxides have shown remarkable potentials with regard to their applicability in advanced technologies ranging from ultraresponsive nanoelectronic devices to advanced healthcare tools. Particularly due to the piezoresistive effects, zinc oxide (ZnO)-based nanowires showed outstanding performance in a large number of applications, including energy harvesting, flexible electronics, smart sensors, etc. In the present work, we demonstrate the versatile crystal engineering of ZnO nano- and microwires (up to centimeter length scales) by a simple flame transport process. To investigate the piezoresistive properties, particular ZnO nanowires were integrated on an electrical push-to-pull device, which enables the application of tensile strain and measurement of in situ electrical properties. The results from ZnO nanowires revealed a periodic variation in stress with respect to the applied periodic potential, which has been discussed in terms of defect relaxations.

Glaucoma filtering surgery is applied to reduce intraocular pressure (IOP) in cases of uncontrolled glaucoma. However, postoperative fibrosis reduces the long-term success of both standard trabeculectomy and microstents. The aim of this study was to test the antiproliferative and anti-inflammatory potential of ZnO-tetrapods (ZnO-T) on human Tenon’s fibroblasts (HTFs) for glaucoma surgery. The toxicity of ZnO-T on HTFs was determined using an MTT test. For analysis of fibroblast proliferation, migration, and transdifferentiation, cultures were stained for Ki67, alpha-smooth muscle actin (α-SMA), and p-SMAD. A fully quantitative multiplex ELISA was used to determine the concentrations of different cytokines, platelet-derived growth factor (PDGF), and hepatocyte growth factor (HGF) in culture supernatants with and without previous ZnO-T treatment. Treatment with higher concentrations (10 and 20 µg/mL) was associated with HTF toxicity, as shown in the wound healing assay. Furthermore, the number of Ki67, α-SMA-positive, and pSMAD-positive cells, as well as IL-6 and HGF in supernatants, were significantly reduced following incubation with ZnO-T. In conclusion, we were able to show the antiproliferative and anti-inflammatory potentials of ZnO-T. Therefore, the use of ZnO-T may provide a new approach to reducing postoperative fibrosis in glaucoma filtering surgery.

In our previous study we were able to show that zinc oxide (ZnO) tetrapods inhibit wound healing processes. Therefore, the aim of this study was to test the antiproliferative effect of two types of porous polydimethylsiloxane (PDMS)/ tetrapodal zinc oxide (ZnO-T) materials, as well as their usability for glaucoma implants. To find the best implant material, two different porous PDMS/ZnO-T materials were examined. One consisted of 3D interconnected PDMS coarse-pored foams with protruding ZnO-T particles; the other consisted of fine-pored 3D interconnected ZnO-T networks homogeneously coated by a thin PDMS film in the nanometer range. Fibroblast cell viability was investigated for both materials via MTT dye, and some implant material samples were further processed for electron microscopy. Both PDMS/ZnO-T materials showed reduced cell viability in the MTT staining. Furthermore, the electron microscopy revealed barely any fibroblasts growing on the implant materials. At the surface of the fine-pored implant material, however, fibroblasts could not be observed in the etched control samples without ZnO-T. It was found that post-processing of the material to the final stent diameter was highly challenging and that the fabrication method, therefore, had to be adapted. In conclusion, we were able to demonstrate the antiproliferative potential of the two different PDMS/ZnO-T materials. Furthermore, smaller pore size (in the range of tens of micrometers) in the implant material seems to be preferable.

Biological information processing pathways in neuron assemblies rely on spike activity, encoding information in the time domain, and operating the highly parallel network at an outstanding robustness and efficiency. One particularly important aspect is the distributed, local pre-processing effectively converting stimulus-induced signals to action potentials, temporally encoding analog information. The field of brain-inspired electronics strives to adapt concepts of information processing in neural networks, e.g., stimulus detection and processing being intertwined. As such, stimulus-modulated resistive switching in memristive devices attracts an increasing attention. This work reports on a three-component memsensor circuit, featuring a UV-sensor, a memristive device with diffusive switching characteristics and a capacitor. Upon application of a DC bias, complex, stimulus-dependent spiking and brain-inspired bursting can be observed, as experimentally showcased using combination of a microstructured, tetrapodal ZnO sensor and a Au/SiO_xN_y/Ag cross-point memristive device. The experimental findings are corroborated by a wave digital model, which successfully replicates both types of behavior and outlines the relation of temporal variation of switching thresholds to the occurrence of bursting activity. Graphical

The human brain, with its energy-efficient and massively parallel architecture seamlessly integrates memory and computation. Its topology and functionality serve as the inspiration for the field of neuromorphic computing. Realizing brain-like hardware requires the integration of fundamental properties such as synaptic plasticity, self-organization, hierarchical and modular structures, as well as three-dimensional connectivity. Current challenges lie in developing liquid based neuromorphic material systems with facile fabrication, three-dimensional processing, and brain-like conductivity. This work presents ionotronic systems - i.e., systems that incorporate the movement of both electrons and ions - to obtain dynamically reconfigurable conductive filaments. Our method employs an electrolyte where an anode reservoir produces ions in-situ, enabling electrode-dependent tunability and sustained operation without ion depletion. This manuscript presents four ionotronic systems. Each system grows brain inspired three-dimensional wires contacting two or more electrodes exhibiting resistive switching at connection on a micrometer scale as well as a nanometer scale, demonstrating hierarchical organization and functionality. Furthermore, these conducting filaments are capable of being disrupted by an external electric field or dissolved over time in the ionotronic system, emulating blooming and pruning aspects of plasticity.