Imperio Anel Perales

Dr. Imperio Anel Perales

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2015 in Journal of Photochemistry and Photobiology A: Chemistry
Verified
Journal Article
Closed access
IPImperio Anel Perales
Imperio Anel Perales
VGVicente Rodríguez González
Vicente Rodríguez González
SLSoo-Wohn Lee
Soo-Wohn Lee
Sergio ObregonSergio Obregon
Sergio Obregon

24 September 2019 in Nanotechnology
Verified
Journal Article
Open access
PDF file
IPImperio Anel Perales
Imperio Anel Perales
Luis Fernando Velásquez-GarcíaLuis Fernando Velásquez-García
Luis Fernando Velásquez-García
We report the design, fabrication, and experimental characterization of the first fully additively manufactured carbon nanotube (CNT) field emission electron sources. The devices are created via direct ink writing (DIW)—one of the least expensive and most versatile additive manufacturing methods, capable of creating monolithic multi-material objects. The devices are 2.5 cm by 2.5 cm glass substrates coated with two imprints, i.e. a trace made of a CNT ink (the emitting electrode), symmetrically surrounded on both sides by a trace made of Ag microparticle ink (the in-plane extractor gate). The CNT ink is a mixture of (–COOH)-functionalized multiwalled CNTs (MWCNTs), N,N-Dimethylformamide, and ethyl cellulose. Optimization of the formulation of the CNT ink resulted in a MWCNT concentration equal to 0.82 wt% and in imprints with an electrical resistivity equal to 0.78 Ω cm. 3D-printed devices having CNT imprints with active length equal to 25 mm (a single, straight trace with 174.5 μm gap between adjacent Ag microparticle imprints) and 135 mm (a square-loop spiral with 499 μm gap between Ag microparticle adjacent imprints) were characterized in a triode configuration (i.e. using an external anode electrode) at ∼2.5 × 10–7 Torr, yielding emission currents as large as 120 μA (60 μA cm−2), start-up voltages as low as 62 V and gate transmission as high as 99%. The low-cost cold cathode technology is compatible with compact applications such as miniaturized mass spectrometry, handheld x-ray generation, and nanosatellite electric propulsion.

20 June 2025 in Metals
Verified
Journal Article
Open access
PDF file
MMMaría José Briones Montemayor
María José Briones Montemayor
RGRigoberto Guzman
Rigoberto Guzman
PMParisa Majari
Parisa Majari
Jorge A. Estrada DíazJorge A. Estrada Díaz
Jorge A. Estrada Díaz
Alex Elías-ZúñigaAlex Elías-Zúñiga
Alex Elías-Zúñiga
IPImperio Anel Perales
Imperio Anel Perales
Selective laser melting (SLM) allows the production of complex lattice structures with tunable mechanical properties. This study proposes an integrated approach to enhance the mechanical properties of Inconel 718 (IN718) lightweight structures by applying distinct heat treatment protocols and tailoring key printing parameters. Four lattice geometries—body-centered cube (BCC), diamond, inverse woodpile (IWP), and gyroid—were selected for evaluation. Three heat treatment protocols were applied to assess their effect on mechanical behavior. Additionally, the influence of key SLM parameters such as laser power, scan speed, hatch spacing, and layer thickness on structural performance was investigated. By combining process tailoring and post-processing strategies, this work demonstrates a method to improve the mechanical response of complex IN718 lattices. The results highlight significant improvements in yield strength and energy absorption for high-performance applications in aerospace and automotive engineering.

8 September 2023 in Polymers
Verified
Journal Article
Open access
PDF file
IPImperio Anel Perales
Imperio Anel Perales
Luis Manuel Palacios-PinedaLuis Manuel Palacios-Pineda
Luis Manuel Palacios-Pineda
Alex Elías-ZúñigaAlex Elías-Zúñiga
Alex Elías-Zúñiga
Daniel Olvera-TrejoDaniel Olvera-Trejo
Daniel Olvera-Trejo
KAKarina del Angel-Sánchez
Karina del Angel-Sánchez
OMOscar Martinez-Romero
Oscar Martinez-Romero
In this paper, we discuss the creation of a hybrid magnetorheological elastomer that combines nano- and microparticles. The mixture contained 45 wt.% fillers, with combinations of either 0% nanoparticles and 100% microparticles or 25% nanoparticles and 75% microparticles. TGA and FTIR testing confirmed the materials’ thermal and chemical stability, while an SEM analysis determined the particles’ size and morphology. XRD results were used to determine the crystal size of both nano- and microparticles. The addition of reinforcing particles, particularly nanoparticles, enhanced the stiffness of the composite materials studied, but their overall strength was only minimally affected. The computed interaction parameter relative to the volume fraction was consistent with the previous literature. Furthermore, the study observed a magnetic response increment in composite materials reinforced with nanoparticles above 30 Hz. The isotropic material containing only microparticles had a lower storage modulus than the isotropic sample with nanoparticles without a magnetic field. However, when a magnetic field was applied, the material with only microparticles exhibited a higher storage modulus than the samples with nanoparticles.

Verified
Journal Article
Open access
PDF file
Alex Elías-ZúñigaAlex Elías-Zúñiga
Alex Elías-Zúñiga
Luis Manuel Palacios-PinedaLuis Manuel Palacios-Pineda
Luis Manuel Palacios-Pineda
IPImperio Anel Perales
Imperio Anel Perales
OMOscar Martinez-Romero
Oscar Martinez-Romero
Daniel Olvera-TrejoDaniel Olvera-Trejo
Daniel Olvera-Trejo
IJIsaac H. Jiménez-Cedeño
Isaac H. Jiménez-Cedeño
The aim of this article was to investigate the mechanical performance of magnetorheological polyurethane elastomers reinforced with different concentrations of carbonyl iron microparticles (CIPs) in which stress softening, energy dissipation, residual strains, microparticles orientation, and magnetic flux density effects will be considered. Other aspects, such as the determination of the dissipated energy during cyclic loading and unloading, were investigated by considering a pseudo-elastic network model that takes into account residual strains, magnetic field intensity, and the isotropic and anisotropic material behavior. Theoretical predictions confirmed that the material shear modulus becomes sensitive not only for higher concentrations of CIPs added into the elastomer material matrix, but also to the magnetic flux intensity that induces attractive forces between CIPs and to the strong bonds between these and the elastomer matrix. It was also found that the addition of CIPs when embedded into the polymer matrix with a predefined orientation enhances the material shear modulus as well as its capacity to dissipate energy when subjected to magnetic flux density in loading and unloading directions.

28 February 2025 in Polymers
Verified
Journal Article
Open access
PDF file
PMParisa Majari
Parisa Majari
Daniel Olvera-TrejoDaniel Olvera-Trejo
Daniel Olvera-Trejo
Jorge A. Estrada DíazJorge A. Estrada Díaz
Jorge A. Estrada Díaz
Alex Elías-ZúñigaAlex Elías-Zúñiga
Alex Elías-Zúñiga
OMOscar Martinez-Romero
Oscar Martinez-Romero
IPImperio Anel Perales
Imperio Anel Perales
Lattice structures offer unique mechanical properties and versatility in engineering applications, yet existing designs often struggle to balance performance and material efficiency. This study introduces the brachistochrone curve as a novel framework for optimizing lattice geometries, enhancing mechanical behavior while minimizing material usage. Using finite element simulations and compressive testing of 3D-printed samples, we analyzed the mechanical response of brachistochrone-based (B-) and standard lattice structures (diamond, IWP, gyroid, and BCC). We investigated the scaling behavior of the volume-to-surface area ratio, incorporated fractal dimension analysis, and compared experimental and numerical results to evaluate the performance of B-lattices versus standard designs (S-). Our findings indicate that brachistochrone-inspired lattices enhance mechanical efficiency, enabling the design of lightweight, high-strength components with sustainable material use. Experimental results suggest that B-gyroid lattices exhibit lower stiffness than S-gyroid lattices under small displacements, highlighting their potential for energy absorption applications.