Selective laser melting (SLM) technology is ushering in a new era of advanced industrial production of metal components. It is of great importance to understand the relationship between the surface features and electrochemical properties of manufactured parts. This work studied the influence of surface orientation on the corrosion resistance of 316L stainless-steel (SS) components manufactured with SLM. The corrosion resistance of the samples was measured using linear polarization resistance (LPR) and electromechanical noise (EN) techniques under three different environments, H2O, 3.5 wt.% NaCl, and 20% H2SO4, analyzing the horizontal (XY) and vertical (XZ) planes. The microstructure and morphology of the samples were obtained by optical (OM) and scanning electron microscopy (SEM). The obtained microstructure showed the grains growing up from the fusion line to the melt pool center and, via SEM-EDS, the presence of irregular and spherical pores was observed. The highest corrosion rate was identified in the H2SO4 solution in the XZ plane with 2.4 × 10−2 mm/year and the XY plane with 1.31 × 10−3 mm/year. The EN technique along with the skewness factor were used to determine the type of corrosion that the material developed. Localized corrosion was observed in the NaCl electrolyte, for the XY and XZ planes (−1.65 and −0.012 skewness factors, respectively), attacking mainly the subgrains of the microstructure and, in some cases, the pores, caused by Cl ions. H2O and H2SO4 solutions presented a uniform corrosion mechanism for the two observed orientations. The morphology identified by SEM was correlated with the results obtained from the electrochemical techniques.
Selective laser melting (SLM) allows the production of complex lattice structures with tunable mechanical properties. This study proposes an integrated approach to enhance the mechanical properties of Inconel 718 (IN718) lightweight structures by applying distinct heat treatment protocols and tailoring key printing parameters. Four lattice geometries—body-centered cube (BCC), diamond, inverse woodpile (IWP), and gyroid—were selected for evaluation. Three heat treatment protocols were applied to assess their effect on mechanical behavior. Additionally, the influence of key SLM parameters such as laser power, scan speed, hatch spacing, and layer thickness on structural performance was investigated. By combining process tailoring and post-processing strategies, this work demonstrates a method to improve the mechanical response of complex IN718 lattices. The results highlight significant improvements in yield strength and energy absorption for high-performance applications in aerospace and automotive engineering.
21 March 2024 in International Journal of Sustainable Engineering
Selective laser melting (SLM) is a complex additive manufacturing process involving rapid laser–material interaction, steep thermal gradients, and phase change phenomena. In this work, a two-dimensional thermal model based on the lattice Boltzmann method (LBM) is developed to simulate the SLM process of AlSi10Mg and 316L stainless steel (316L SS) alloys. The model captures the laser–material interaction, layer-by-layer deposition, phase change behavior, and heat transfer mechanisms, including conduction and convection. Experimental observations of melt pool width and depth were also performed on the microstructures of the two SLM alloys in order to compare the results with the numerical predictions. For the AlSi10Mg alloy, good agreement is obtained, with relative errors of 19.13% in melt pool width and 7.58% in depth, accurately capturing melt pool penetration and remelting behavior. In contrast, moderate deviations are observed for 316L SS, indicating a higher sensitivity to thermophysical properties and suggesting that further model refinement is required. Overall, the results demonstrate the capability of the LBM framework as an efficient and robust tool for analyzing thermal behavior in SLM and for supporting process parameter optimization.