Xiaolei Xing

Dr. Xiaolei Xing


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 March 2023 in Friction
Verified
Journal Article
Open access
PDF file
YZYefei Zhou
Yefei Zhou
ZCZhihao Chen
Zhihao Chen
TZTao Zhang
Tao Zhang
SZSilong Zhang
Silong Zhang
XXXiaolei Xing
Xiaolei Xing
Dongyang LiDongyang Li
Dongyang Li
Amorphous carbon films have attracted substantial interest due to their exceptional mechanical and tribological properties. Previous studies revealed that the amorphous carbon films exhibited lower coefficient of friction (COF) because of the transformation in bond structure from sp3-C to sp2-C during friction processes. However, the mechanism for such a transformation during friction is not well understood. This study is conducted to get an insight into the metastable transformation in amorphous carbon film during friction by means of experiments and molecular dynamics (MD) simulation. Relevant wear tests showed that wear of the film changed from an abrasive wear mode to a mixture of abrasion and adhesive wear, resulting in a decrease in growth rate of the wear rate after the running-in stage. It is worth noting that the sp3-C atoms were increased during the running-in stage when the films contained lower sp3/sp2 ratios. However, the formed sp3-C atoms could only be short-lived and gradually transformed to sp2-C atoms with the graphitization generated on the wearing surface of the films. The radial distribution function and translational order parameter indicated that the films’ high sp3/sp2 ratio led to an increased sp2-C proportion on the wear scar after friction, which caused an increased structural ordering.

1 May 2016 in Materials Letters
Verified
Journal Article
Closed access
JGJing Guo
Jing Guo
SLSha Liu
Sha Liu
YZYefei Zhou
Yefei Zhou
JWJibo Wang
Jibo Wang
XXXiaolei Xing
Xiaolei Xing
QYQingxiang Yang
Qingxiang Yang

26 July 2018 in Tribology Letters
Verified
Journal Article
Closed access
PDF file
YZY. F. Zhou
Y. F. Zhou
GQG. K. Qin
G. K. Qin
PJP. J. Jiang
P. J. Jiang
SWS. F. Wang
S. F. Wang
XQX. W. Qi
X. W. Qi
QYQingxiang Yang
Qingxiang Yang

6 June 2020 in Coatings
Verified
Journal Article
Open access
PDF file
LZLijie Zhang
Lijie Zhang
XZXuemei Zong
Xuemei Zong
xiaoming yuanxiaoming yuan
xiaoming yuan
XXXiaolei Xing
Xiaolei Xing
Diamond-like carbon (DLC) films were deposited by means of pulsed cathodic arc deposition on pretreated polyurethane (PU) rubber substrates. Tetrachloroethylene was chosen as a dissolution method to remove the plasticizer added in the PU substrates. Scanning electron microscopy (SEM) and Raman spectroscopy were applied to observe and characterize the surface morphologies and compositions of the deposited films, respectively. The tribological behaviours of uncoated and coated rubbers were investigated with ring-on-disc tribo experiments under dry sliding conditions. The coefficients of friction (COFs) of the coated rubbers were 40% lower than those of uncoated rubber and the COFs of different samples decreased first and then increased slightly with the increase in temperature and the time of ultrasonic treatment under dry friction. Based on the above experiments, ultrasonic treatment with tetrachloroethylene contributes to the increase in the wear resistance of DLC films deposited on PU rubbers. The most suitable temperature and time of ultrasonic treatment with tetrachloroethylene is 50 °C for 15 min.

29 July 2021 in Acta crystallographica Section B, Structural science, crystal engineering and materials
Verified
Journal Article
Closed access
PDF file
ZSZhijun Shi
Zhijun Shi
WSWei Shao
Wei Shao
XXXiaolei Xing
Xiaolei Xing
JRJames Ren
James Ren
YZYefei Zhou
Yefei Zhou
QYQingxiang Yang
Qingxiang Yang

2 June 2026 in Materials
Verified
Journal Article
Open access
PDF file
SMShuo Meng
Shuo Meng
ZZZhao Zonglin Zonglin Zhao
Zhao Zonglin Zonglin Zhao
宏冀宏伟 冀
宏伟 冀
GQGuangkuo Qin
Guangkuo Qin
YZYefei Zhou
Yefei Zhou
XXXiaolei Xing
Xiaolei Xing
Ti-6Al-4V thin-walled specimens were fabricated by gas tungsten arc welding-based wire arc additive manufacturing under controlled oxygen concentrations of 1, 500 and 1000 ppm, with ambient air used as a severe oxygen-exposure reference. The effects of oxygen concentration on oxygen uptake, microstructure, oxidation behavior and mechanical properties were investigated. Within the controlled range, the internal oxygen content increased from 0.07 to 0.15 wt.%, remaining below the ASTM B381-2013 limit. These specimens retained sound interlayer bonding and were mainly composed of α-Ti with a small amount of β-Ti, without detectable crystalline TiO2 by X-ray diffraction. Controlled oxygen uptake refined the α lamellae and increased deformation resistance through interstitial solid-solution strengthening, increasing hardness from approximately 320 HV to 330–350 HV and tensile strength from 880 to 940 MPa, while reducing elongation from 11.5% to 9.5%. In contrast, the ambient-air specimen reached an oxygen content of 0.36 wt.%, developed an approximately 90 μm oxidation-affected layer and showed TiO2-related oxides, α-colony aggregation and interface weakening. Its tensile strength and elongation decreased sharply to 295 MPa and 1.9%, respectively. These results indicate that atmosphere control in WAAM Ti-6Al-4V should prevent the transition from controlled oxygen strengthening to excessive oxygen-induced embrittlement.