The ammonia synthesis from nitrogen and water under ambient conditions is one of the most inviting but challenging reaction routes. Although nitrogen is abundant in the atmosphere and the ammonia synthesis reaction is exothermic on the thermodynamics, the conversion of N2 to ammonia is actually hard to proceed owing to the chemical inertness and stability of N2 molecules. In industry, ammonia synthesis is carried out by the Haber-Bosch process under harsh conditions (300–500 °C, 20–30 MPa) associated with the requirement of substantial energy input and the enormous emission of greenhouse gases (e.g., CO2). Recently, a growing number of studies on photo(electro)catalytic and electrocatalytic nitrogen reduction reaction (NRR) in aqueous solution have attracted extensive attention, which holds great promise for nitrogen fixation under room temperature and atmospheric pressure. However, the very low efficiency and ambiguous mechanism still remain as the major hurdles for the development of photochemical and electrochemical NRR systems. Here we provide an overview of the latest progresses, remaining challenges and future prospects in photocatalytic and electrocatalytic nitrogen fixation. Moreover, this review offers a helpful guidance for the reasonable design of photocatalysts and electrocatalysts towards NRR by combining theory predictions and experiment results. We hope this review can stimulate more research interests in the relatively understudied but highly promising research field of NRR. Open image in new window
The design of electrochemically active materials with appropriate structures and compositions is very important for applications in energy conversion and storage devices. Herein, we demonstrate an effective strategy to prepare microporous heteroatom-doped carbon frameworks derived from naturally-abundant pine needles. The preparation procedure is based on the carbonization of pine needles, followed by KOH activation at a temperature range of 700–1000 °C. The resultant nitrogen-doped carbon consists of abundant micropores and an ultrahigh specific surface area (up to 2433 m2 g−1), leading to high performances in electrocatalytic hydrogen evolution reaction (HER) and supercapacitors. Specifically, when the pine needle-derived carbon (activated at 800 °C) serves as a HER electrocatalyst, it exhibits a low onset potential (∼4 mV), a small Tafel slope (∼45.9 mV dec−1) and a remarkable stability over long-term cycling. When evaluated as an electrode material for supercapacitors, the pine needle-derived carbon (activated at 900 °C) demonstrates high specific capacitance (236 F g−1 at 0.1 A g−1), remarkable rate capability (183 F g−1 at even 20 A g−1) and good long-term stability. Notably, the specific capacitance at 2.0 A g−1 increased from ∼205 to ∼227 F g−1 after cycling for 5000 times, owing to the further activation and wetting of the electrodes. This novel and low-cost biomass-derived carbon material is very promising for many applications, especially in electrocatalytic water splitting and supercapacitors.
29 April 2020 in ACS Applied Materials & Interfaces