Optical heterodyne analog radio-over-fiber (A-RoF) links provide an efficient solution for future millimeter wave (mm-wave) wireless systems. The phase noise of the photo-generated mm-wave carrier limits the performance of such links, especially, for the transmission of low subcarrier baud rate multi-carrier signals. In this work, we present three different techniques for the compensation of the laser frequency offset (FO) and phase noise (PN) in an optical heterodyne A-RoF system. The first approach advocates the use of an analog mm-wave receiver; the second approach uses standard digital signal processing (DSP) algorithms, while in the third approach, the use of a photonic integrated mode locked laser (MLL) with reduced DSP is advocated. The compensation of the FO and PN with these three approaches is demonstrated by successfully transmitting a 1.95 MHz subcarrier spaced orthogonal frequency division multiplexing (OFDM) signal over a 25 km 61 GHz mm-wave optical heterodyne A-RoF link. The advantages and limitations of these approaches are discussed in detail and with regard to recent 5G recommendations, highlighting their potential for deployment in next generation wireless systems.
In the fields of radar imaging and detection, the use of optical components appears as an attractive solution to overcome limitations of current technologies. This paper focuses on the development of a new class of microwave-photonic radar imaging systems enabling volumetric image reconstruction. These operations are made possible using a multiple-input multiple-output antenna array architecture combined with the conception of a dedicated optical multiplexing technology to limit the complexity of the whole reception chain. Particular emphasis is placed on the development of mathematical formalisms specifically adapted to these microwave-photonic radar architectures, making it possible to model the measurements carried out and to reconstruct three-dimensional radar images. These solutions are validated by the reconstruction of complex scenes with a multiple-input multiple-output radar made of up to 16 transmitters and 16 receivers.
In this paper, a complete theoretical and experimental study of amplitude noise impact on performance of radio-over-fiber (RoF) communication system in millimeter-wave (MMW) frequency band is presented. A simulation method is also presented, using which one can determine the origin of the amplitude noise which has the most impact on error vector magnitude (EVM). This method is based on analyzing the trends of EVM versus received optical power. The impact of different optical and electrical noise such as relative intensity noise, shot noise and thermal noise on EVM is precisely studied employing experimental and theoretical analysis. In the proposed RoF system, two techniques are used to generate MMW signal, and the EVM results are compared from amplitude noise viewpoint. In the first technique, two independent distributed feedback lasers are used to generate MMW signal at the output of a photodetector, and the second technique is based on a passively mode-locked laser diode. Impact of optical sources phase noise on performance of the system is removed using a noncoherent down-conversion method based on envelope detector. Using this method, a very good matching between the experimental and the simulation results is observed.
In this paper, we study and demonstrate, for the first time, how the chromatic dispersion causes laser mode partition noise (LMPN) at millimeter-wave (mm-wave) frequencies. A 60 GHz radio-over-fiber (RoF) transmission system employing an optical frequency comb (OFC) is theoretically and experimentally investigated. Chromatic dispersion is a limiting factor in RoF systems, which induces power fading and phase noise on the resultant mm-wave beating carriers. Furthermore, experimental measurements in this paper show that when transmitting optical comb spectrum across kilometers of optical fiber, chromatic dispersion destroys partition noise compensation between modes. Therefore, the beat note carrier suffers from intensity noise impairments that degrade the system performance.
Microwave photonic applications such as beamforming and ltering entail the photonic summation of optically-carried RF signals. The most commonly used components to perform these functions are ber-optic couplers, arrayed waveguide gratings and optical concentrators, whose common characteristic is to gather these optical signals on a single output before converting them into an RF signal with a photodiode. The spatial superposition of several optical elds causes photonic interference leading to the emergence of noise in the RF domain. This paper focuses on an experimental study of the impact of optical interference and phase decorrelation between delayed optical elds in an optical ber interferometer, considering two different combining technologies. When a ber coupler is employed, the full overlap of the spatial elds induces a high-level noise on the electrical signal generated after the photodiode. To solve this problem, the use of a microwave photonic summation device based on an optical power concentrator and a high-speed planar photodiode permits a strong mitigation of the optical interference. The results of the experiments presented reveal that the proposed approach can reduce phase noise effects on the resulting electrical sum signal by a factor of 40 dB.