Established and already commercialized energetic materials, such as those based on Ni/Al for joining, lack the adequate combination of high energy density and ductile reaction products. To join components, this combination is required for mechanically reliable bonds. In addition to the improvement of existing technologies, expansion into new fields of application can also be anticipated which triggers the search for improved materials. Here, we present a comprehensive characterization of the key parameters that enables us to classify the Ru/Al system as new reactive material among other energetic systems. We finally found that Ru/Al exhibits the unusual integration of high energy density and ductility. For example, we measured reaction front velocities up to 10.9 (±0.33) ms−1 and peak reaction temperatures of about 2000 °C indicating the elevated energy density. To our knowledge, such high temperatures have never been reported in experiments for metallic multilayers. In situ experiments show the synthesis of a single-phase B2-RuAl microstructure ensuring improved ductility. Molecular dynamics simulations corroborate the transformation behavior to RuAl. This study fundamentally characterizes a Ru/Al system and demonstrates its enhanced properties fulfilling the identification requirements of a novel nanoscaled energetic material.
While extensively studied for heating rates below 1.7 K/s and above 1000 K/s, the solid-state phase transformations in Al/Ni reactive multilayers have not been examined at intermediate heating rates between 100 K/s and 1000 K/s. Combined nanocalorimetry and time-resolved synchrotron x-ray diffraction studies are utilized to address this range of heating rates for multilayers with an overall composition of 10 at. % Ni and a bilayer thickness of 220 nm. It was found that a two-stage phase formation of Al3Ni proceeds up to a heating rate of 1000 K/s. The two growth stages occur in the solid-state and are kinetically separated. The activation energy of the first growth stage is determined to be 137 kJ/mol, which agrees well with the literature data at low heating rates. At 1000 K/s, a transition to a runaway reaction is observed. Unusual for metallic multilayers, the reaction proceeds completely in the solid-state which is also known as “solid flame.” Using nanocalorimetry, a critical input power density for ignition of 5.8 × 104 W/cm3 was determined. The rapid succession of the two Al3Ni formation stages was identified as the underlying mechanism for the self-sustaining reaction.
The use of solid lubricants such as graphene, graphene oxide, and other nanoparticles have gained notable attention in the tribological community to reduce friction and wear thus aiming at improved energy efficiency and sustainability. Tribological experiments unify rather extreme conditions such as high contact pressures, small contact areas, relative sliding motion, and rapid heating. This combination leads to mechanically- and/or thermally induced chemical, structural and microstructural modifications of the lubricating nanoparticles during rubbing thus altering their material’s properties. Due to the high sensitivity, we propose nanocalorimetry as the method of choice to shed more light on the thermally-induced processes and changes. As a model material for solid lubricants, we explore the transitions of graphene oxide under heating with 1000 °C/s up to 600 °C using quasi-adiabatic nanocalorimetry. We identify a strong exothermic runaway reaction at 317 °C. This runaway is preceded by exothermic reactions between 75–125 °C, which are correlated with the release of intercalated species and the formation of CO and CO2.