The stress–strain relationship of 5052 aluminium alloy was investigated via quasi-static tensile tests and split Hopkinson pressure bar tests. The specimens were exposed to various temperatures (25–500°C) and strain rates (10⁻⁴–0.7 × 10⁴s⁻¹). At strain rates ranging from 0.001 to 3000 s⁻¹, the material underwent significant work hardening. When the strain rate exceeded 5000 s⁻¹, the work hardening effect decreased and the flow stress was relatively constant. The Johnson–Cook constitutive model was modified to describe the deformation behaviour of the material subjected to high temperatures and strain rates. The accuracy of the modified model was verified through ballistic impact testing.

The temperature and strain rate significantly affect the ballistic performance of UHMWPE, but the deformation of UHMWPE under thermo-mechanical coupling has been rarely studied. To investigate the influences of the temperature and the strain rate on the mechanical properties of UHMWPE, a Split Hopkinson Pressure Bar (SHPB) apparatus was used to conduct uniaxial compression experiments on UHMWPE. The stress–strain curves of UHMWPE were obtained at temperatures of 20–100 °C and strain rates of 1300–4300 s⁻¹. Based on the experimental results, the UHMWPE belongs to viscoelastic–plastic material, and a hardening effect occurs once UHMWPE enters the plastic zone. By comparing the stress–strain curves at different temperatures and strain rates, it was found that UHMWPE exhibits strain rate strengthening and temperature softening effects. By modifying the Sherwood–Frost model, a constitutive model was established to describe the dynamic mechanical properties of UHMWPE at different temperatures. The results calculated using the constitutive model were in good agreement with the experimental data. This study provides a reference for the design of UHMWPE as a ballistic-resistant material.

The mechanical properties of polyethylene (PE) materials are greatly influenced by their molecular structures, environmental temperature, and strain rate. In this study, static and dynamic compression tests were performed on two semicrystalline PE materials—ultrahigh molecular weight polyethylene (UHMWPE) and high-density polyethylene (HDPE). The stress–strain curves of HDPE and UHMWPE under uniaxial compression at temperatures of −40–120 °C and strain rates of 0.001–5500 s⁻¹ were obtained. The research findings suggest that both the UHMWPE and HDPE showed significant strain rate-strengthening effect and temperature-softening effect. In particular, HDPE exhibited better compression resistance and high-temperature resistance. The relationships between the yield stress and temperature and between the yield stress and strain rate for both materials were fitted, and the Cowper–Symonds constitutive model was built while considering the temperature effect. The parameters of the constitutive model were obtained and input into LS-DYNA software to simulate the dynamic compression process of HDPE. The simulation result was consistent with the test result, validating the accuracy of the constitutive parameters.

Deep penetration experiments were performed on five types of concrete with different coarse aggregate content. The projectile diameter was 29.9 mm, the initial velocity was 647 m/s, and the volume fraction of the coarse aggregate was between 0% and 59.0%. The damage laws and damage mechanism of the target were analyzed. The pure mortar target had the smallest radial crack origin diameter and crater depth. Too high of the coarse aggregate content led to the formation of many voids, which led to the disappearance of radial cracks, crater surface bypassing the coarse aggregate and a large reduction of crater diameter. The influence laws and mechanism of the coarse aggregate on the penetration depth were also analyzed. The increase of volume fraction of coarse aggregate was beneficial to reducing penetration depth and the increase of voids volume fraction was opposite. The penetration depth was the lowest when the volume fraction of the coarse aggregate reached the maximum and no voids formed. By modifying the static resistance stress in the Forrestal penetration formula, a penetration depth model considering the volume fractions of the coarse aggregate and voids was established. The predicted results were in good agreement with the experimental results.

To study the dynamic plastic properties of high-purity molybdenum materials at high temperature and high strain rate, we designed tests to compare the mechanical behaviour of two high-purity molybdenum materials with different purities and two with different processing deformation conditions under dynamic impact compression in the temperature range of 297–1273 K. We analysed the molybdenum materials’ sensitivities to the strain-hardening effect, strain rate-strengthening effect, and temperature-softening effect as well as the comprehensive response to the combined effect of the strain rate and temperature, the adiabatic impact process, and the microstructure at high temperature and high strain rate. Furthermore, based on a modified Johnson–Cook constitutive model, we quantitatively analysed the flow stresses in these materials. The calculation results strongly agree with the test results. Our findings indicate that the high-purity molybdenum materials show consistent sensitivity to the combined effect of strain rate and temperature regarding the dynamic plastic properties. The materials with higher purity are less sensitive to the combined effect of the strain rate and temperature, and those with less processing deformation experience more pronounced strain-hardening effects. Under high strain rate at room temperature, these materials are highly susceptible to impact embrittlement and decreases in dynamic plastic properties due to intergranular fracture in the internal microstructure. However, increasing the impact environment temperature can significantly improve their plastic properties. The higher the temperature, the better the plastic properties and the higher the impact toughness.