Maxim Yutkin

Dr. Maxim Yutkin

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2022 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
SKSiarhei Khirevich
Siarhei Khirevich
MYMaxim Yutkin
Maxim Yutkin
TPTadeusz Patzek
Tadeusz Patzek
Estimation of permeability of porous media dates back to Henry Darcy [H. Darcy, Les Fontaines Publiques de la Ville de Dijon (Victor Dalmont, 1856)], and its knowledge is essential in many scientific and engineering endeavors. Despite apparent simplicity of permeability measurements, the literature data are scattered, and this scatter not always can be attributed to the precision of experiment or simulation or to sample variability. Here, we demonstrate an excellent agreement (<1%) between experiments and simulations, where experimental results are extensive and stable, while flow is simulated from first principles, directly on three-dimensional images of the sample, and without fitting parameters. Analyzing when experiments and simulations agree reveals a major flaw affecting many experimental measurements with the out-of-sample placement of pressure ports, including industry standards. The flaw originates from (1) incorrect calculation of the applied pressure gradient, (2) omitting virtual part of the measured system, and (3) pressure loss at the sample–tube contact. Contrary to common wisdom, the relative magnitude of (3) is defined by the sample–tube diameter ratio and is independent of the size of sample pores. Our findings are applicable to a wide range of permeability measurements, including geological-sample-type (Hassler cell) and membrane-type. The reported pressure loss (3) also affects two-phase flow measurements, such as capillary pressure estimation. Removing or taking the flaw into account advances the understanding and control of flow-related processes in complex geometries.

1 June 2021 in Energy
Verified
Journal Article
Open access
NBNatanael Otavio Favero Bolson
Natanael Otavio Favero Bolson
MYMaxim Yutkin
Maxim Yutkin
TPTadeusz Patzek
Tadeusz Patzek

1 January 2022 in Transport in Porous Media
Verified
Journal Article
Open access
PDF file
MYMaxim Yutkin
Maxim Yutkin
CRC. J. Radke
C. J. Radke
TPTadeusz Patzek
Tadeusz Patzek
Modified or low-salinity waterflooding of carbonate oil reservoirs is of considerable economic interest because of potentially inexpensive incremental oil production. The injected modified brine changes the surface chemistry of the carbonate rock and crude oil interfaces and detaches some of adhered crude oil. Composition design of brine modified to enhance oil recovery is determined by labor-intensive trial-and-error laboratory corefloods. Unfortunately, limestone, which predominantly consists of aqueous-reactive calcium carbonate, alters injected brine composition by mineral dissolution/precipitation. Accordingly, the rock reactivity hinders rational design of brines tailored to improve oil recovery. Previously, we presented a theoretical analysis of 1D, single-phase brine injection into calcium carbonate-rock that accounts for mineral dissolution, ion exchange, and dispersion (Yutkin et al. in SPE J 23(01):084–101, 2018. 10.2118/182829-PA). Here, we present the results of single-phase waterflood-brine experiments that verify the theoretical framework. We show that concentration histories eluted from Indiana limestone cores possess features characteristic of fast calcium carbonate dissolution, 2:1 ion exchange, and high dispersion. The injected brine reaches chemical equilibrium inside the porous rock even at injection rates higher than 3.5 $$\times$$ × 10 $$^{-3}$$ - 3 m s $$^{-1}$$ - 1 (1000 ft/day). Ion exchange results in salinity waves observed experimentally, while high dispersion is responsible for long concentration history tails. Using the verified theoretical framework, we briefly explore how these processes modify aqueous-phase composition during the injection of designer brines into a calcium-carbonate reservoir. Because of high salinity of the initial and injected brines, ion exchange affects injected concentrations only in high surface area carbonates/limestones, such as chalks. Calcium-carbonate dissolution only affects aqueous solution pH. The rock surface composition is affected by all processes.

15 January 2021 in Transport in Porous Media
Verified
Journal Article
Open access
PDF file
MYMaxim Yutkin
Maxim Yutkin
CRC. J. Radke
C. J. Radke
TPTadeusz Patzek
Tadeusz Patzek
Higher oil recovery after waterflood in carbonate reservoirs is attributed to increasing water wettability of the rock that in turn relies on complicated surface chemistry. In addition, calcite mineral reacts with aqueous solutions and can alter substantially the composition of injected water by mineral dissolution. Carefully designed chemical and/or brine flood compositions in the laboratory may not remain intact while the injected solutions pass through the reactive reservoir rock. This is especially true for a low-salinity waterflood process, where some finely tuned brine compositions can improve flood performances, whereas others cannot. We present a 1D reactive transport numerical model that captures the changes in injected compositions during water flow through porous carbonate rock. We include highly coupled bulk aqueous and surface carbonate-reaction chemistry, detailed reaction and mass transfer kinetics, 2:1 calcium ion exchange, and axial dispersion. At typical calcite reaction rates, local equilibrium is established immediately upon injection. In SI, we validate the reactive transport model against analytic solutions for rock dissolution, ion exchange, and longitudinal dispersion, each considered separately. Accordingly, using an open-source algorithm (Charlton and Parkhurst in Comput Geosci 37(10):1653–1663, 2011. 10.1016/j.cageo.2011.02.005), we outline a design tool to specify chemical/brine flooding formulations that correct for composition alteration by the carbonate rock. Subsequent works compare proposed theory against experiments on core plugs of Indiana limestone and give examples of how injected salinity compositions deviate from those designed in the laboratory for water-wettability improvement.

16 June 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AHAhmed Hassan
Ahmed Hassan
MYMaxim Yutkin
Maxim Yutkin
VCViswasanthi Chandra
Viswasanthi Chandra
TPTadeusz Patzek
Tadeusz Patzek
Pore casting refers to filling the void spaces of porous materials with an extraneous fluid, usually epoxy resin, to obtain a high-strength composite material, stabilize a fragile porous structure, produce a three-dimensional replica of the pore space, or provide imaging contrast. Epoxy pore casting may be accompanied by additional procedures, such as etching, in which the material matrix is dissolved, leaving a clean cast. Moreover, an epoxy resin may be mixed with fluorophore substances to allow fluorescence imaging. Our work aims to investigate and optimize the epoxy pore casting procedure parameters, for example, impregnation pressure. We use silicon micromodels as a reference to validate the key parameters of high-pressure resin impregnation. We demonstrate possible artifacts and defects that might develop during impregnation with resin, e.g., resin shrinkage and gas trapping. In the end, we developed an optimized protocol to produce high-quality resin pore casts for high-resolution 3D imaging and the description of microporosity in micritic carbonates. In our applications, the high-quality pore casts were acid-etched to remove the non-transparent carbonate material, making the pore casts suitable for imaging with Confocal Laser Scanning Microscopy (CLSM). In addition, we evaluate the quality of our etching procedure using micro-computed tomography (micro-CT) scans of the pre- and post-etched samples and demonstrate that the etched epoxy pore casts represent the pore space of microporous carbonate rock samples with high fidelity.

3 October 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
NBNatanael Otavio Favero Bolson
Natanael Otavio Favero Bolson
MYMaxim Yutkin
Maxim Yutkin
TPTadeusz Patzek
Tadeusz Patzek
Electrification scenarios dominate most plans to decarbonize the global economy and slow down the unfolding of climate change. In this work, we evaluate from a primary power perspective the impacts of electrifying the power, transport, residential and commercial sectors of the economy. We also investigate the electrification of industrial intense heat processes. Our analysis shows that, in terms of primary power, electrification can result in significant savings of up to 28% of final power use. However, actual savings depend on the sources of electricity used. For intense heat processes, these savings are very sensitive to the electricity sources, and losses of over 70% of primary power can occur during the conversion of heat to electricity and back to heat. Overall, this study highlights the potential benefits and limitations of electrification as a tool for reducing primary power consumption and transitioning to a more sustainable energy system.