Production of energy and chemicals from biomass resources has been regarded as one promising method to address the challenge of global warming. In this research, production of acrylic acid from fumaric acid, one of the biomass-derived building blocks, is proposed. CuO was employed as a solid oxidant, which showed excellent activity and selectivity for the production of acrylic acid, and water played an essential role in acting as not only a solvent but also a catalyst in this process. An optimum acrylic acid yield of 76.4% was successfully obtained after the reaction of fumaric acid with CuO at 300 °C for only 60 s.This research provides a green and highly efficient way to produce value-added chemicals from biomass-derived building blocks, and thus is promising for practical application.

To reveal the nature of CO₂ reduction to formate with high efficiency by in situ hydrogen produced from hydrothermal reactions with iron, DFT calculations were used. A reaction pathway was proposed in which the formate was produced through the key intermediate species, namely iron hydride, produced in situ in the process of hydrogen gas production. In the in situ hydrogenation of CO₂, the charge of H in the iron hydride was −0.135, and the Fe–H bond distance was approximately 1.537 Å. A C-H bond was formed as a transition state during the attack of H^δ− on C^δ+. Finally, a HCOO species was formed. The distance of the C-H bond was 1.107 Å. The calculated free energy barrier was 16.43 kcal/mol. This study may provide new insight into CO₂ reduction to formate in hydrothermal reactions with metal.

In this study, the impact of NaOH on the hydrothermal oxidation of guaiacol was investigated. It was found that NaOH significantly accelerated the production of formic acid and acetic acid with H₂O₂ or CuO as the oxidant. With the strong oxidant, H₂O₂, the highest acetic acid yield (15.73%) and formic acid (5.64%) were obtained at 300 °C for 90 s with NaOH 1.0 mol·L⁻¹ and a 100% H₂O₂ oxygen supply. In comparison, with CuO as the oxidant, the highest values of acetic acid (13.42%) and formic acid (4.21%) were acquired at 250 °C for 6 h with NaOH 1.0 mol·L⁻¹. Formic acid and acetic acid were generated through the oxidation of intermediates, such as levulinic acid, fumaric acid, maleic acid, etc. These results demonstrated that NaOH catalytic hydrothermal oxidation has potential for the production of value-added chemicals from biomass materials. When CuO is used as the oxidant, this process could also be used as a green method for copper smelting along with the utilization of lignin biomass.

An integrated process by coupling hydrothermal reactions, including CO₂ reduction and H₂O dissociation with metals, is proposed. The hydrogen could be rapidly produced under hydrothermal conditions, owing to the special characteristics of high temperature water, generating metal hydrides as intermediates. Hydrogen production from the H₂O dissociation under hydrothermal conditions is one of the most ideal processes due to its environmentally friendly impact. Recent experimental and theoretical studies on the hydrothermal reduction of CO₂ to value-added products by in situ generated metal hydrides are introduced, including the production of formic acid, methanol, methane, and long-chain hydrocarbons. These results indicate that this process holds promise in respect to the conversion of CO₂ to useful chemicals and fuels, and for hydrogen storage, which could help alleviate the problems of climate change and energy shortage.