Jesús P. Val-Aguasca

Mr. Jesús P. Val-Aguasca

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2019 in Agronomy
Verified
Journal Article
Open access
PDF file
JVJesús P. Val-Aguasca
Jesús P. Val-Aguasca
MVMaría Videgain
María Videgain
Pablo Martín-RamosPablo Martín-Ramos
Pablo Martín-Ramos
MVMariano Vidal-Cortés
Mariano Vidal-Cortés
ABAntonio Boné-Garasa
Antonio Boné-Garasa
FGF. Javier Garcia-Ramos
F. Javier Garcia-Ramos
Combine harvesters are an important cause of fires worldwide. The purpose of this work has been to investigate the critical points associated with the risk of fire, identified through a survey distributed to combine owners in Aragon (Spain). Information was collected on the technical characteristics of the machines and, when appropriate, on the characteristics of the generated fires (crop, use of straw chopper, point in which the fire was originated, etc.). Based on the survey data, relationships between the characteristics of the machine and the ignition of a fire were analyzed, and the points of the harvester in which the fire originated were investigated. A statistically significant relationship of fire risk was only found with the number of hectares harvested, in such a way that the risk would be especially high for machines with more than 6000 accumulated ha. 32% of the fires were originated in the engine zone, compared with 31% in the cutting bar and 18% in the bearings and belts. The study was completed with on-site temperature measurements carried out on nine machines in 2018 and 2019, in which temperatures above 250 °C were recorded in the exhaust manifold and in the cutting bar. These temperatures exceeded the ignition thresholds obtained in the flammability studies conducted for wheat residues collected from the harvesters.

30 October 2019 in Agronomy
Verified
Journal Article
Open access
PDF file
JVJesús P. Val-Aguasca
Jesús P. Val-Aguasca
Pablo Martín-RamosPablo Martín-Ramos
Pablo Martín-Ramos
EHEsperanza Horcas
Esperanza Horcas
Jesús L. YánizJesús L. Yániz
Jesús L. Yániz
FGF. Javier Garcia-Ramos
F. Javier Garcia-Ramos
Sheep farming makes an important socio-economic contribution to Spain’s rural areas by sustaining farming and employment in less favored regions, but it is a low-profit sector because of high operating and regulatory costs. One possible solution would be to raise for slaughter lambs from dairy sheep that are not required as replacements. However, the early weaning of these lambs and their artificial rearing generally lead to reduced growth rates and high mortalities. In the work presented herein, three housing systems (slat + heating plate, slat + infrared lamp, and deep-litter + infrared lamp) were tested on 763 lambs over an eight-month period in a farm located in Ejea de los Caballeros (Zaragoza, Spain), with a view to reducing mortality during the period of artificial lactation. The effect of the environmental parameters of the lamb housing on the development of the lambs was evaluated by monitoring environmental (temperature, relative humidity, CO2 and NH3) and productive parameters (weight, average daily gain, and deaths). The results suggested that the combination of deep litter with straw bedding and infrared lamp heating would be the most favorable option, as it led to the highest average daily gain and the lowest percentage of deaths. From the study of the relationship of the initial weight with deaths, a prediction curve was obtained, defining the maximum prices to be paid per lamb as a function of their initial weight to guarantee the profitability of the raising process. This may be regarded as a valuable guidance for Spanish sheep farmers, as it can reduce their economic uncertainty.

14 August 2025 in Agriengineering
Verified
Journal Article
Open access
PDF file
JVJesús P. Val-Aguasca
Jesús P. Val-Aguasca
Iván González-PérezIván González-Pérez
Iván González-Pérez
ESEnoc Sanz-Ablanedo
Enoc Sanz-Ablanedo
ÁMÁngel Maresma
Ángel Maresma
José Ramón Rodríguez-PérezJosé Ramón Rodríguez-Pérez
José Ramón Rodríguez-Pérez
Evaluating the response of maize crops to different nitrogen fertilization rates is essential to ensure their agronomic, environmental, and economic efficiency. In this study, the spectral information of maize plants subjected to five distinct nitrogen fertilization strategies was analyzed. The fertilization strategies were based on the practices commonly used in maize fields in the study area, with the aim of ensuring the research findings’ applicability. The spectral reflectance was measured using a spectroradiometer covering the 350–2500 nm range, and the results enabled the identification of optimal spectral regions for monitoring plants’ nitrogen status, particularly in the visible and infrared ranges. A Principal Component Analysis (PCA) of the reflectance data revealed the key wavelengths most sensitive to the nitrogen availability: 555 nm and 720 nm during the vegetative stage and 680 nm during the reproductive stage. This information will support the development of drone-mounted multispectral sensor systems for large-scale monitoring, as well as the design of low-cost sensors for early nitrogen deficiency detection. Furthermore, the study demonstrated the feasibility of estimating the cornstalk nitrate content based on direct reflectance measurements of maize stems. The prediction model showed satisfactory performance, with a coefficient of determination (R2) of 0.845 and a root mean square error of prediction (RMSECV) of 2035.3 ppm, indicating its strong potential for predicting the NO3-N concentrations in maize stems.

6 February 2026 in Remote Sensing
Verified
Journal Article
Open access
PDF file
MMMohammad Mahmoud Mhaidat
Mohammad Mahmoud Mhaidat
Iván González-PérezIván González-Pérez
Iván González-Pérez
José Ramón Rodríguez-PérezJosé Ramón Rodríguez-Pérez
José Ramón Rodríguez-Pérez
JVJesús P. Val-Aguasca
Jesús P. Val-Aguasca
ESEnoc Sanz-Ablanedo
Enoc Sanz-Ablanedo
Unmanned aerial vehicles (UAVs) are increasingly used for crop monitoring, but their widespread adoption is limited since they often rely on non-standard specialized cameras equipped with near-infrared (NIR) sensors. More affordable and scalable crop monitoring solutions would be enabled, however, if data could be collected using standard RGB sensors. We compared visible-band indices that incorporate blue spectral range (NDGBI and NDRBI) with traditional NIR-based indices (NDVI and GNDVI) for their effectiveness in monitoring maize growth and nitrogen status. UAV multispectral data capture at different maize growth stages was complemented by ground-based spectroradiometer measurements for calibration and validation. Various agronomic and yield variables (including cornstalk NO3–N content, grain yield, grain moisture, number of corncobs, and grain test weight) were recorded to link spectral responses with plant performance and nutritional status. The results show that the overall performance of the RGB-based approach was comparable to that of the NIR-based approach, with the visible-band indices proving to be highly sensitive to physiological stress, chlorophyll degradation, and nitrogen variability in maize. Our findings highlight the potential of the RGB-based indices to complement or even replace specialized NIR-based indices, providing a cost-effective, high-resolution tool for precision agriculture.

1 January 2019
Verified
Conference Paper
Open access
PDF file
JVJesús P. Val-Aguasca
Jesús P. Val-Aguasca
Pablo Martín-RamosPablo Martín-Ramos
Pablo Martín-Ramos
EHEsperanza Horcas
Esperanza Horcas
JAJesús Yániz Pérez de Albéniz
Jesús Yániz Pérez de Albéniz
FGFrancisco Javier García-Ramos
Francisco Javier García-Ramos
Dada la difícil situación que está atravesando el sector ovino de carne, se hace necesaria la búsqueda de estrategias para mejorarla. Una posible solución sería introducir en el mercado cárnico corderos procedentes de ovejas lecheras, pero esta opción se ve afectada por una alta mortalidad durante la etapa de lactancia artificial. En el presente trabajo se estudia un nuevo sistema de explotación de corderos de razas lecheras que reduce dicha mortalidad y facilita su crecimiento hasta pesos elevados, sin engrasar. El trabajo se ha desarrollado en un cebadero de corderos, situado en Ejea de los Caballeros (Zaragoza), trabajando con 763 corderos, divididos en seis periodos, desde septiembre de 2016 a abril de 2017. Se han empleado tres sistemas de manejo diferentes (slat + placa calefactora, slat + lámpara infrarroja, y paja + lámpara infrarroja) y se ha evaluado el efecto de los parámetros ambientales del alojamiento ganadero sobre el desarrollo de los corderos en el periodo de lactancia artificial. Este proceso ha requerido una monitorización en continuo de los parámetros ambientales (temperatura, humedad relativa, CO2 y NH3) y un seguimiento de los parámetros productivos (peso de entrada de cada cordero, peso al cabo de 15 días y al cabo de un mes, ganancia media diaria, y bajas para cada tipo de manejo en cada periodo). También se han ensayado tres tipos de lacto-reemplazantes con diferentes composiciones al objeto de evaluar su efecto. Los resultados obtenidos sugieren que el sistema de manejo basado en suelo de paja con calefacción con lámpara infrarroja es la opción más deseable, tanto desde un punto de vista ambiental como por su influencia positiva en los factores productivos. Del estudio de la relación del peso de entrada con las bajas, se ha obtenido una curva de predicción de las mismas, de utilidad para la determinación del precio máximo a pagar por cordero en función de su peso de entrada que garantice la rentabilidad del proceso. Val-Aguasca, Jesús Pedro; Martín-Ramos, Pablo; Horcas, Esperanza; Yániz Pérez de Albéniz, Jesús; García-Ramos, Francisco Javier

1 January 2019
Verified
Conference Paper
Open access
PDF file
JVJesús P. Val-Aguasca
Jesús P. Val-Aguasca
MVMaría Videgain-Marco
María Videgain-Marco
Pablo Martín-RamosPablo Martín-Ramos
Pablo Martín-Ramos
MVMariano Vidal-Cortés
Mariano Vidal-Cortés
ABAntonio Boné-Garasa
Antonio Boné-Garasa
FGFrancisco Javier García-Ramos
Francisco Javier García-Ramos
En Aragón, en los años 2016 y 2017, se han producido 295 y 464 incendios respectivamente, afectando a una superficie total de 915 y 908 ha. De dichos incendios, un 12% de los ocurridos en 2016 y un 7% de los que tuvieron lugar en 2017 fueron debidos a motores y máquinas, mayormente producidos por cosechadoras. El propósito de este trabajo ha sido investigar las zonas críticas de las cosechadoras asociadas al riesgo de incendio a través de la realización de una encuesta dirigida a propietarios de cosechadoras en Aragón. Se ha recabado información tanto sobre características técnicas de las máquinas (marca, potencia, antigüedad de la máquina, hectáreas cosechadas, etc.) como, en su caso, de las características de los incendios producidos (cultivo cosechado, utilización de sistema de picado, zona de la máquina donde se originó el incendio, etc.). En las 275 respuestas obtenidas se han referido 75 casos de incendio. En base a los datos facilitados en la encuesta, se ha analizado si existe alguna relación entre las características de la máquina y la producción de un incendio, y se han comparado las zonas de la cosechadora en la que se ha originado el incendio con información facilitada por una compañía de seguros. Se ha podido concluir que sólo existe una relación estadísticamente significativa de los incendios con el número de hectáreas cosechadas (vida útil de la cosechadora), siendo especialmente alto el riesgo para máquinas con más de 6000 ha acumuladas. Por otra parte, un 32% de los incendios tuvieron su origen en la zona del motor, frente a un 31% en la barra de corte y un 18% en los rodamientos y correas. El uso del picador no favoreció el origen del incendio en ninguna zona concreta de la máquina. El estudio se ha completado con medidas de temperatura in situ realizadas sobre varias máquinas en el verano de 2018, registrándose temperaturas superiores a 300 °C en el colector de escape, y superiores a 400 °C en la barra de corte cuando la cuchilla trabajaba en condiciones de rozamiento. Val-Aguasca, Jesús Pedro; Videgain-Marco, María; Martín-Ramos, Pablo; Vidal-Cortés, Mariano; Boné-Garasa, Antonio; García-Ramos, Francisco Javier