This paper proposes a stochastic model predictive control (MPC) framework for traffic signal coordination and control in urban traffic networks. One of the important features of the proposed stochastic MPC model is that uncertain traffic demands and stochastic disturbances are taken into account. Aiming to effectively model the uncertainties and avoid queue spillback in traffic networks, we develop a stochastic expected value model with chance constraints for the objective function of the stochastic MPC model. The objective function is defined to minimize the queue length and the oscillation of green time between any two control steps. Furthermore, by embedding the stochastic simulation and neural networks into a genetic algorithm, we propose a hybrid intelligent algorithm to solve the stochastic MPC model. Finally, numerical results by means of simulation on a road network are presented, which illustrate the performance of the proposed approach.
High demand for batteries with a wide operating temperature range is on the rise with the development of wearable electronic devices, especially electric vehicles used in cold regions. Al–air batteries for electric vehicles have triggered worldwide interest due to their excellent theoretical energy density and safety. In this study, the low-temperature performance of Al–air batteries is tested for the first time. The effects of temperature and electrolyte concentrations on the discharge performance are then studied in detail. The discharge voltage is significantly influenced by the temperature. The low temperature could significantly depress the hydrogen evolution reaction of Al anodes. The Al–air batteries reached an extraordinary capacity of 2480 mAh/g, with 31 wt% KOH electrolyte at −15 °C. Moreover, the Al–air batteries at 0 °C exhibited higher discharge voltage and power densities than those at 15 and −15 °C. This study provides an important reference for future studies to improve low-temperature performance of Al–air batteries.
Mixed polymer brush-grafted nanochannels—where two distinct species of polymers are alternately grafted on the inner surface of nanochannels—are an interesting class of nanostructured hybrid materials. By using a coarse-grained molecular dynamics simulation method, we are able to simulate the electrokinetic transport dynamics of the fluid in such nanochannels as well as the conformational behaviors of the mixed polymer brush. We find that (1) the brush adopts vertically-layered and longitudinally-separated structures due to the coupling of electroosmotic flow (EOF) and applied electric field; (2) the solvent quality affects the brush conformations and the transport properties of the EOF; (3) the EOF flux non-monotonically depends on the grafting density, although the EOF velocity in the central region of the channel monotonically depends on the grafting density.
Solid Al–air batteries are a promising power source for potable electronics due to their environmentally friendly qualities and high energy density. However, the solid Al–air battery suffers from anodic corrosion and it is difficult to achieve a higher specific capacity. Thus, this work aims at suppressing the corrosion of Al anode by adding an electrospun Al2O3 interlayer on to the surface of the anode. The Al2O3 interlayer effectively inhibits the self-corrosion of the Al anode. Further, the effects of the thickness of the Al2O3 film on corrosion behavior were investigated. The results showed that the Al–air battery with a 4 μm Al2O3 interlayer is more suitable for a low current density discharge, which could be applied for mini-watt devices. With a proper thickness of the Al2O3 interlayer, corrosion of the anode was considerably suppressed without sacrificing the discharge voltage at a low current density. The Al–air battery with a 4 μm Al2O3 interlayer provided a significantly high capacity (1255 mAh/g at 5 mA/cm2) and an excellent stability. This wo presents a promising approach for fabricating an inhibiting corrosion interlayer for solid Al–air battery designed for mini-watt devices.
21 November 2019 in The Journal of Physical Chemistry C