NMOS-based Integrated Modular Bypass for Use in Solar systems (NIMBUS) is designed as a replacement for the traditional bypass diode, used in common solar panels. Because of the series connection between the individual solar cells, the power output of a photovoltaic (PV) panel will drop disproportionally under partial shading. Currently, this is solved by dividing the PV panel into substrings, each with a diode bypass placed in parallel. This allows an alternative current path. However, the diodes still have a significant voltage drop (about 350 mV), and due to the fairly large currents in a panel, the diodes are dissipating power that we would rather see at the output of the panel. The NIMBUS chip, being a low-voltage-drop switch, aims to replace these diodes and, thus, reduce that power loss. NIMBUS is a smart bypass: a completely stand-alone system that detects the failing of one or more cells and activates when necessary. It is designed for a 100-mV voltage drop under a 5-A load current. When two or more NIMBUS chips are placed in parallel, an internal synchronization circuit ensures proper operation to provide for larger load currents. This paper will elaborate on the operation, design and implementation of the NIMBUS chip, as well as on the first measurements.

The energy yield of a solar panel can be severely impacted by partial shading. Shade caused by nearby static objects can hardly be avoided in installations such as building-applied or building-integrated photovoltaics. Smart reconfigurable photovoltaics (PV) panels are able to change their intra-module configuration to reduce this impact: small substrings can be rewired to be connected in a more optimal configuration. To achieve this, a reconfiguration switch needs to be designed. In this paper a switch for the optimization of module power by reconfiguration of all strings (SOMBRA), a smart switch, is presented. SOMBRA is a fully integrated, low-ohmic switch, designed for currents up to 10 A. It is fully floating up to 50 V, while still being able to communicate with a central unit as an inter-integrated circuit (I ${}^2$ C) slave. Two versions were realized, SOMBRA-LV10 for low voltages (LV) and a load current of 10 A, and SOMBRA-HV05 for high voltages (HV) and a load current of 5 A. Measurements proved these devices to be functional, measuring an on-resistance of 1.3 m $\Omega$ for SOMBRA-LV10 and 7.3 m $\Omega$ for SOMBRA-HV05. This paper will elaborate on the operation, design, and implementation of SOMRBA, as well as the first tests with a small reconfigurable PV module.