The elaboration of suitable NdFeB‐based permanent magnets is essential for high‐performance electrical machines in a number of applications. In this respect, the understanding of the relationship between heat transfer phenomena and the final solidified microstructure is the key to the control of the grain size and the improvement of the magnetic properties. The problem is even more acute with the emergence of new manufacturing processes, such as the laser powder bed fusion, where the cooling rates are much higher than those encountered in the standard strip casting process and where the microstructure can be considered as fixed from the fabrication step. The objective of the present work is to identify correlations between interstructural spacings in the solidified alloys and cooling conditions. This study is based on a methodology coupling experimental and numerical simulation approaches featuring three solidification processes: strip casting, arc melting, and laser fusion. The obtained results cover more than four orders of magnitude in terms of cooling rates R and allow to propose a reliable empirical relationship between the interstructural spacing λ and R of the form λ [μm] = 83 R [K s −1 ] −0.36 . This relation can thus be used to estimate cooling rates from metallographic observations.
A highly integrated electric drivetrain module with 157 kW peak power is presented, which incorporates novel technologies in the field of electric machines, power electronics and transmissions: 1. High-speed electric machine with six phases and injection mould polymer-bonded magnets; 2. High-ratio dual-speed transmission with double planetary gear set (Ravigneaux gear set); 3. Gallium nitride (GaN) power electronics with winding reconfiguration feature.The combination of these components in one single housing makes the drive module flexible to integrate and to combine with conventional or alternative propulsion technologies, thus allowing various hybrid and electric drivetrain topologies. All technologies are selected in accordance with mass production potential and can therefore have a high impact on the automotive market in the future. Currently, the drive module is under development; the first models will be assembled in winter 2019. The integration into a demonstrator vehicle in 2020 will prove the potential of many new technologies and the suitability for the automotive market.
15 July 2025 in Journal of Magnetism and Magnetic Materials
Les oxydes transparents conducteurs (TCO) ont la rare propriété de concilier haute transparence et conductivité élevée, ce qui en fait des matériaux-clés pour de nombreuses applications requérant des électrodes transparentes comme les cellules photovoltaïques, les diodes organiques et les écrans plats. Avec une résistivité de l'ordre de 10⁻⁴ ohm.cm et une transmittance de 85% dans le domaine visible, l'oxyde d'indium dopé à l'étain (ITO) est le matériau privilégié. Toutefois, sa fragilité, son instabilité aux procédés plasma et son coût croissant du fait de sa haute teneur en indium sont autant de raisons de rechercher des matériaux alternatifs. Cette thèse a pour but de comprendre les points clefs permettant d'améliorer les performances d'une électrode transparente en oxyde de zinc dopé à l'aluminium (AZO) sur les plans optique, électrique et au niveau des interfaces ; des cellules photovoltaïques en silicium amorphe hydrogéné (a-Si:H) servent de dispositif-test à cette étude. Réalisées par pulvérisation cathodique magnétron sous des conditions de dépôt variées, les couches minces d'AZO obtenues ont une structure microcristalline et, pour des paramètres déterminés, des performances optoélectroniques approchant celles de l'ITO. Un modèle adapté d'après la théorie de Drude a permis de rendre compte du lien entre transparence et conduction et de confirmer la saturation en porteurs du matériau. L'efficacité d'une électrode au sein d'un dispositif dépend également très fortement de l'interface entre celle-ci et l'absorbeur, les porteurs devant être extraits rapidement pour ne pas se recombiner. Quelques voies ont été explorées pour réduire la barrière de potentiel entre le silicium amorphe et l'électrode tout en favorisant l'efficacité optique des cellules. Il ressort que l'insertion d'une couche tampon d'oxyde de titane ou de tungstène permet d'obtenir un gain notable dans les performances des cellules.
In order to maximize the torque of Permanent Magnet assisted Synchronous Reluctance (PMaSynRel) machines, sintered magnets should ideally exhibit curved shapes. Standard process fails to produce such geometries without large critical material loss during machining. The Powder Injection Molding technique has been assessed in this work as an efficient process for producing complex shaped magnets while minimizing the environmental impacts and improving the recyclability of end-of-life products. A case study suited for the automotive sector is presented.