This paper presents spatial interpolation techniques to produce finer-scale daily rainfall data from regional climate modeling. Four common interpolation techniques (ANUDEM, Spline, IDW, and Kriging) were compared and assessed against station rainfall data and modeled rainfall. The performance was assessed by the mean absolute error (MAE), mean relative error (MRE), root mean squared error (RMSE), and the spatial and temporal distributions. The results indicate that Inverse Distance Weighting (IDW) method is slightly better than the other three methods and it is also easy to implement in a geographic information system (GIS). The IDW method was then used to produce forty-year (1990–2009 and 2040–2059) time series rainfall data at daily, monthly, and annual time scales at a ground resolution of 100 m for the Greater Sydney Region (GSR). The downscaled daily rainfall data have been further utilized to predict rainfall erosivity and soil erosion risk and their future changes in GSR to support assessments and planning of climate change impact and adaptation in local scale.
Soil loss due to water erosion, in particular hillslope erosion, can be estimated using predictive models such as the Revised Universal Soil Loss Equation (RUSLE). One of the important and dynamic elements in the RUSLE model is the cover and management factor (C-factor), which represents effects of vegetation canopy and ground cover in reducing soil loss. This study explores the potential for using fractional vegetation cover, rather than traditional green vegetation indices (e.g. NDVI), to estimate C-factor and consequently hillslope erosion hazard across New South Wales (NSW), Australia. Values of the C-factor were estimated from the emerging time-series fractional cover products derived from Moderate Resolution Imaging Spectroradiometer (MODIS). Time-series C-factor and hillslope erosion maps were produced for NSW on monthly and annual bases for a 13-year period from 2000 to 2012 using automated scripts in a geographic information system. The estimated C-factor time-series values were compared with previous study and field measurements in NSW revealing good consistency in both spatial and temporal contexts. Using these time-series maps, the relationship was analysed between ground cover and hillslope erosion and their temporal variation across NSW. Outcomes from this time-series study are being used to assess hillslope erosion hazard, sediment and water quality (particularly after severe bushfires) across NSW at local, catchment and regional scales.
Considerable seasonal and inter-annual changes exist in rainfall amount and intensity in New South Wales (NSW), Australia. These changes are expected to have significant effect on rainfall erosivity and soil erosion by water, but the magnitude of the impact is not well quantified because of the non-linear and dynamic nature of the relationship between rainfall amount and rainfall erosivity. The primary aim of this study was to model spatial and temporal variations in rainfall erosivity and impacts on hillslope erosion across NSW. We developed a daily rainfall erosivity model for NSW to calculate monthly and annual rainfall erosivity values by using gridded daily rainfall data for a continuous 53-year period including a baseline period (1961–90) and a recent period (2000–12). Model parameters were improved based on their geographic locations and elevations to be truly geo-referenced and representative of the regional relationships. Monthly and annual hillslope erosion risk for the same periods was estimated with the Revised Universal Soil Loss Equation. We produced finer scale (100-m) maps of rainfall erosivity and hillslope erosion through spatial interpolation techniques, and implemented the calculation of rainfall erosivity and hillslope erosion in a geographic information system by using automated scripts so that it is fast, repeatable and portable. The modelled rainfall erosivity values were compared with pluviograph calculations and previous studies, and the Nash–Sutcliffe coefficient of efficiency is >0.90. Outcomes from this study provide not only baseline information but also continuous estimates of rainfall erosivity and hillslope erosions allowing better monitoring and mitigation of hillslope erosion risk in NSW.
In this study, simple dust detection and intensity estimation methods using Himawari-8 Advanced Himawari Imager (AHI) data are developed. Based on the differences of thermal radiation characteristics between dust and other typical objects, brightness temperature difference (BTD) among four channels (BT11–BT12, BT8–BT11, and BT3–BT11) are used together for dust detection. When considering the thermal radiation variation of dust particles over different land cover types, a dynamic threshold scheme for dust detection is adopted. An enhanced dust intensity index (EDII) is developed based on the reflectance of visible/near-infrared bands, BT of thermal-infrared bands, and aerosol optical depth (AOD), and is applied to the detected dust area. The AOD is retrieved using multiple temporal AHI observations by assuming little surface change in a short time period (i.e., 1–2 days) and proved with high accuracy using the Aerosol Robotic Network (AERONET) and cross-compared with MODIS AOD products. The dust detection results agree qualitatively with the dust locations that were revealed by AHI true color images. The results were also compared quantitatively with dust identification results from the AERONET AOD and Ångström exponent, achieving a total dust detection accuracy of 84%. A good agreement is obtained between EDII and the visibility data from National Climatic Data Center ground measurements, with a correlation coefficient of 0.81, indicating the effectiveness of EDII in dust monitoring.
13 February 2020 in Land Degradation & Development
Soil erodibility represents the soil’s response to rainfall and run-off erosivity and is related to soil properties such as organic matter content, texture, structure, permeability and aggregate stability. Soil erodibility is an important factor in soil erosion modelling, such as the Revised Universal Soil Loss Equation (RUSLE), in which it is represented by the soil erodibility factor (K-factor). However, determination of soil erodibility at larger spatial scales is often problematic because of the lack of spatial data on soil properties and field measurements for model validation. Recently, a major national project has resulted in the release of digital soil maps (DSMs) for a wide range of key soil properties over the entire Australian continent at approximately 90-m spatial resolution. In the present study we used the DSMs and New South Wales (NSW) Soil and Land Information System to map and validate soil erodibility for soil depths up to 100 cm. We assessed eight empirical methods or existing maps on erodibility estimation and produced a harmonised high-resolution soil erodibility map for the entire state of NSW with improvements based on studies in NSW. The modelled erodibility values were compared with those from field measurements at soil plots for NSW soils and revealed good agreement. The erodibility map shows similar patterns as that of the parent material lithology classes, but no obvious trend with any single soil property. Most of the modelled erodibility values range from 0.02 to 0.07 t ha h ha–1 MJ–1 mm–1 with a mean (± s.d.) of 0.035 ± 0.007 t ha h ha–1 MJ–1 mm–1. The validated K-factor map was further used along with other RUSLE factors to assess soil loss across NSW for preventing and managing soil erosion.