Artur Silva

Mr. Artur Silva

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 September 2020 in IEEE Sensors Journal
Verified
Journal Article
Closed access
Joao RosolemJoao Rosolem
Joao Rosolem
RPRivael Strobel Penze
Rivael Strobel Penze
Claudio FloridiaClaudio Floridia
Claudio Floridia
FBFabio Renato Bassan
Fabio Renato Bassan
RPRodrigo Peres
Rodrigo Peres
MJMarcelo Agra Ramos Junior
Marcelo Agra Ramos Junior
In this work, we described a study of the influence of dynamical temperatures on pressure measurements in two different packaging types used in FBG pressure sensors. We developed these sensors to measure internal combustion pressure in closed-loop control of thermoelectric engines. The packaging techniques development considered the available monitoring points in the thermoelectric engine and the harsh environment of the monitoring points. In a monitoring point, the temperature can exceed 300 °C and the pressure can reach 250 bar. We detailed the use of single-ended and double-ended FBG fixation methods as packaging techniques. The FBG pressure sensors using these techniques were tested in the laboratory and a thermoelectric engine. The results demonstrated that the dynamical behavior of the high-temperature gas originated from the combustion chamber affects the dynamical pressure measurements performed by the single-ended FBG pressure sensors when they were exposed to the hot gas. This effect can be suppressed by using a double-ended FBG pressure sensor mainly due to its packaging method. Its signal shape is comparable to a reference sensor used in the same condition became this FBG packaging solution the most suitable to use in the closed-loop control of thermoelectric engines.

8 November 2019 in Sensors
Verified
Journal Article
Open access
PDF file
AMAguinaldo Goes de Melo
Aguinaldo Goes de Melo
DBDaniel Benetti
Daniel Benetti
LLLuiz Alkimin de Lacerda
Luiz Alkimin de Lacerda
RPRodrigo Peres
Rodrigo Peres
Claudio FloridiaClaudio Floridia
Claudio Floridia
Joao RosolemJoao Rosolem
Joao Rosolem
Power transformer is the most important and expensive equipment used in the electric power industry. Fiber Bragg grating (FBG) sensors has stood out as a flexible and particularly suitable tool for power transformer monitoring being a passive and dielectric sensor element. In this work we evaluated the performance of FBG pressure sensors developed to monitor the static and dynamic pressure in high voltage winding transformers during events such as short-circuit and inrush current. Two types of sensors packaging materials were evaluated in laboratory: polyether ether ketone (PEEK) and transformerboard (TB). The sensors have been tested for high intensity and short duration impacts similar to those occurring in short circuits. In addition, we evaluated the time response of sensors using an interrogation system with a 5 kHz sweep in order to analyze the short circuit response time properly. The results pointed that FBG pressure sensors using PEEK and TB are suitable for transformer winding monitoring. The static sensitivity obtained to PEEK based sensors was 0.911 pm/N, in the range of 800 N to 1500 N. This sensitivity is 4.47 higher than TB based sensors sensitivity. Dynamical tests performance showed an excellent repeatability for both sensors, in agreement with static observation.

17 November 2021 in IEEE Sensors Journal
Verified
Journal Article
Closed access
Claudio FloridiaClaudio Floridia
Claudio Floridia
ASArtur Silva
Artur Silva
Joao RosolemJoao Rosolem
Joao Rosolem
FBFabio Renato Bassan
Fabio Renato Bassan
Rivael PenzeRivael Penze
Rivael Penze
MMMarcelo de Moraes
Marcelo de Moraes
This article presents a proposal for an alternative approach for simultaneous measurement of electric current and temperature using an optical sensor based on magnetostrictive material that employs a single Fiber Bragg Grating (FBG). The sensor head is of simple design and allows easy installation on the existing conductors of the underground distribution network. This proposal measures the root mean square (RMS) current from 50 to 600 A at any temperature between 10°C to 60°C, real values for a distribution network. The approach consists of obtaining surface curves of two key parameters of the sensor’s waveform response, $\lambda ({t})$ . The main parameters are the peak-to-peak and minimum wavelengths as a function of temperature and current. When determining these parameters from the waveform, the crossing point of the contour graphics is used to uniquely determine the current and temperature in the sensor head in real-time, without the need for any correction process.

3 May 2019 in Optical Engineering
Verified
Journal Article
Closed access
PDF file
ASArtur Silva
Artur Silva
LBLuis Barea
Luis Barea
DSDanilo H. Spadoti
Danilo H. Spadoti
CFCarlos A. De Francisco
Carlos A. De Francisco
<!-- *** Custom HTML *** -->We demonstrate the potential of applying hollow core and negative curvature optical fibers (HC-NCF) as efficient sensors to monitor the concentration of three high-toxicity gases: methane (CH4), carbon monoxide (CO), and nitrogen monoxide (NO). Numerical simulations demonstrate that the insertion of holes in such fibers guarantees the entry of these gases into their hollow core and allows strong interaction of these gases with the low-loss mode propagating in the HC-NCF. This interaction between light and gas in spectral regions with high gas absorption allows one to monitor reduced concentrations of these gases present in the environment simply by monitoring the optical power at the fiber output. The results show a linear behavior of propagation losses as a function of concentrations of 0% to 100% of CO and NO gas, and for concentrations of 0% to 5% of CH4 gas. This linearity between the propagation losses and the variation of the concentrations of gases in the environment can promote its application in healthcare and environment, to monitor low concentrations of gases ensuring high speed and accuracy.

1 July 2021 in Sensors
Verified
Journal Article
Open access
PDF file
ASArtur Silva
Artur Silva
Claudio FloridiaClaudio Floridia
Claudio Floridia
Joao RosolemJoao Rosolem
Joao Rosolem
Sensors based on polarization are suitable for application in power grids due to their excellent characteristics, such as high electrical insulation, non-magnetic saturation, oil-free, no risk of explosive failures, and high bandwidth. Utility companies are incorporating new technologies that are driving the evolution of electrical systems. Thus, it is interesting to evaluate the possibility of using polarization sensors in a network configuration. In this work, we present an experimental study of a current and voltage polarization sensor network applied to a medium voltage distribution grid. The current sensor is based on the Faraday effect, and the voltage sensor uses the Pockels effect. Both sensors use a 90° polarization degree between the two output ports to compensate for the various impairments on the measurements by applying the difference-over-sum. The network uses a DWDM topology centered at the 1550 nm range, and both current and voltage sensors in this work used this spectral band. We evaluated the sensor node in terms of accuracy according to IEC standard 61869-10 and IEC standard 61869-11. Considering that an important application of this sensor network is in the aerial cable of medium voltage networks, sensor node accuracy was also estimated in the presence of cable vibration. The calculated power budget of the proposed network indicates that reaching ten nodes of current and voltage sensors in a 10 km optical link is possible, which is enough for a medium urban voltage distribution network.

15 October 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Joao RosolemJoao Rosolem
Joao Rosolem
MAMarcio C. Argentato
Marcio C. Argentato
Fabio BassanFabio Bassan
Fabio Bassan
Rivael PenzeRivael Penze
Rivael Penze
Claudio FloridiaClaudio Floridia
Claudio Floridia
MJMarcelo A. Ramos Junior
Marcelo A. Ramos Junior
We demonstrated in this work a filterless, multi-point and temperature-independent FBG (fiber Bragg grating) dynamical demodulator using pulse-width-modulation (PWM). In this approach, the FBG interrogation system is composed of a tunable laser and a demodulator that is designed to detect the wavelength shift of the FBG sensor without any optical filter making it very suitable to be used in harsh environments. In this work, we applied the proposed method that uses the PWM technique for FBG sensors placed in high pressure and high-temperature environments. The proposed method was characterized in the laboratory using an FBG sensor modulated in a frequency of 6 Hz, with a 1 kHz sweeping frequency in the wavelength range from 1527 to 1534 nm. Also, the method was evaluated in a field test in an engine of a thermoelectric power plant.