31 May 2019 in Journal of Lightwave Technology
In this work we proposed a sealing method of fiber Bragg grating (FBG) in pressure sensors using electroless nickel-plating. The sensor is designed to be used in harsh environments of thermoelectric power plant engines. In order to be applied in the engine injector nozzle the FBG has just a single attached point in the pressure sensor and the combustion chamber pressure will freely compress the FBG. The fixation material used to seal the FBG in the pressure sensor is the key for the sensor performance considering the engine environment used in thermoelectric power plant. Typical level of pressure in the engine monitoring point is around 200 bar and the temperature exceed 300 °C. We detailed the method of fabrication and the characteristics of this method. Next the FBG pressure sensors using electroless nickel-plating sealing were studied and submitted to laboratorial and field trial evaluation. In addition, we evaluated the signal characteristics of the FBG pressure sensor and we compared it with a standard pressure sensor used in this application.
21 September 2020 in IEEE Sensors Journal
In this work, we described a study of the influence of dynamical temperatures on pressure measurements in two different packaging types used in FBG pressure sensors. We developed these sensors to measure internal combustion pressure in closed-loop control of thermoelectric engines. The packaging techniques development considered the available monitoring points in the thermoelectric engine and the harsh environment of the monitoring points. In a monitoring point, the temperature can exceed 300 °C and the pressure can reach 250 bar. We detailed the use of single-ended and double-ended FBG fixation methods as packaging techniques. The FBG pressure sensors using these techniques were tested in the laboratory and a thermoelectric engine. The results demonstrated that the dynamical behavior of the high-temperature gas originated from the combustion chamber affects the dynamical pressure measurements performed by the single-ended FBG pressure sensors when they were exposed to the hot gas. This effect can be suppressed by using a double-ended FBG pressure sensor mainly due to its packaging method. Its signal shape is comparable to a reference sensor used in the same condition became this FBG packaging solution the most suitable to use in the closed-loop control of thermoelectric engines.
17 November 2021 in IEEE Sensors Journal
This article presents a proposal for an alternative approach for simultaneous measurement of electric current and temperature using an optical sensor based on magnetostrictive material that employs a single Fiber Bragg Grating (FBG). The sensor head is of simple design and allows easy installation on the existing conductors of the underground distribution network. This proposal measures the root mean square (RMS) current from 50 to 600 A at any temperature between 10°C to 60°C, real values for a distribution network. The approach consists of obtaining surface curves of two key parameters of the sensor’s waveform response, $\lambda ({t})$ . The main parameters are the peak-to-peak and minimum wavelengths as a function of temperature and current. When determining these parameters from the waveform, the crossing point of the contour graphics is used to uniquely determine the current and temperature in the sensor head in real-time, without the need for any correction process.