The vascular bundle is an important structural unit that determines the growth and properties of bamboo. A high-resolution X-ray microtomography (μCT) was used to observe and reconstruct a three-dimensional (3D) morphometry model of the vascular bundle of the Qiongzhuea tumidinoda node due to its advantages of quick, nondestructive, and accurate testing of plant internal structure. The results showed that the morphology of vascular bundles varied significantly in the axial direction. In the cross-section, the number of axial vascular bundles reached a maximum at the lower end of the sheath scar, and the minimum of it was at the middle of the diaphragm. The frequency of axial vascular bundles decreased from the lower end of the node to the nodal ridge, and subsequently increased until the upper end of the bamboo node. The proportion of parenchyma, fibers, and conducting tissue was 65.7%, 30.5%, and 3.8%, respectively. The conducting tissues were intertwined to form a complex 3D network structure, with a connectivity of 94.77%. The conducting tissue with the largest volume accounted for 60.26% of the total volume of the conducting tissue. The 3D-distribution pattern of the conducting tissue of the node and that of the fibers were similar, but their thickness changed in the opposite pattern. This study revealed the 3D morphometry of the conducting tissue and fibers of the bamboo node, the reconstruction of the skeleton made the morphology more intuitive. Quantitative indicators such as the 3D volume, proportion, and connectivity of each type of tissue was obtained, the bamboo node was enlarged mainly caused by the particularly developed fibers. This work laid the foundation for a better understanding of the mechanical properties and water transportation of bamboo and revealed the mystery of bamboo node shedding of Q. tumidinoda.

Bamboo is a naturally occurring composite material, which exhibits a decomposable structure with varying composition. The distinct structural features of bamboo contribute to its exceptional strength and flexibility, making it an excellent choice for construction purposes. However, only a limited portion of bamboo species has been studied for its mechanical properties, and research on Bambusa arundinaceae has primarily focused on its pharmaceutical values. Therefore, we investigated the relationship between the structural characteristics of B. arundinaceae and its mechanical properties using axial compression experiments and tangential bending experiments. The results showed that the distribution density of vascular bundles (VBs) of B. arundinaceae ranged from 1.98 to 4.34 pcs/mm²,while the volume fraction of fiber sheaths (FSs) ranged from 35.82 to 42.58%. The average compressive strength, flexural strength, and flexural elasticity modulus were 113.99 MPa, 239.07 MPa, and 17.39 GPa, which were 97.56%, 64.07%, and 66.09% higher than those of moso bamboo (Phyllostachys edulis), respectively. The compressive strength, flexural strengths, and elasticity modulus of B. arundinaceae were positively correlated with both the distribution density of VBs and the volume fraction of FSs. These insights are crucial for the advancement of durable and efficient materials in diverse sectors including construction and manufacturing.

Calamus caesius is one of the most well-known commercial climbing palm species across the world. A comprehensive understanding of the growth-dependent variation in microstructure and polymer distribution can provide fundamental information to guide its end-use applications. In this study, we investigated the age-wise characteristics of rattan stems and the ultrastructure of fibers using electron microscopy, light microscopy, and FTIR. The results showed that the frequency of vascular bundles with a diameter of 0.55∼0.62 mm in C. caesius was 3.49∼3.97 pieces/mm${}^2$. The diameter and length of the metaxylem vessel were 0.32∼0.34 mm and 2.86∼3.00 mm, respectively. Cellulose, lignin, xylan, and HCA are mainly concentrated in the fiber sheath of vascular bundles. The distribution of major polymers in positions other than the top was relatively stable. The tissue proportion of parenchyma, xylem, and phloem did not differ significantly at different positions. The proportion of fibers from 22.27%∼25.33% showed significant differences. The fiber length was 1.43∼1.76 mm, and the diameter was 10.78∼12.63 $\mathsf{\mu }$m. During the growth process of the rattan stem, the secondary wall of fiber cells continued to accumulate inward towards the cell cavity from 2 to 6 layers. The unique fiber properties and stable vascular bundle composition of C. caesius may have potential in fields such as composite materials or renewable energy.

Moso bamboo (Phyllostachys edulis), an apt example of an anisotropic, functionally graded composite material, is the most important commercial bamboo species of China. This species has excellent mechanical properties due to its unique vascular bundle structure. This article examines the variation in mechanical properties of single vascular bundles with respect to their location within a bamboo culm. The mechanical exfoliation method was used to prepare the single vascular bundle. This study found that moso bamboo has superior stiffness and strength. Additionally, the variation in properties was large in the radial direction but minimal in longitudinal direction. The large variation in mechanical properties of vascular bundles can be ascribed to the synergistic effect of the fibrous sheath and parenchyma rather than to changes in fibrous sheath properties. This study provides a basis for the structure application for moso bamboo.