Egg is a regularly consumed food item. Currently, chlorinated water washing is the most common practice used to disinfect eggs, but this process has a negative environmental impact. A new physical technique, plasma-activated water (PAW), has been demonstrated to possess effective antibacterial activities without long-term chemical residue. In this study, air PAW was used to inactivate Salmonella enterica serovar Enteritidis on shell eggs. Different combinations of activation parameters, including water sources (reverse osmotic (RO) water, tap water), power (40 W, 50 W, 60 W) and activation time (10 min, 20 min, 30 min), were evaluated. The oxidation–reduction potential (ORP) and pH values of each combination were measured, and their antibacterial activity was tested in a bacterial suspension. Higher antibacterial activities, higher ORP values, and lower pH values were obtained with higher power, longer activation time, and lower water hardness. The antibacterial activities of PAW decreased rapidly by increasing the storage time both at room and refrigeration temperatures. Afterwards, RO water was pre-activated for 20 min at 60 W, and then the eggs inoculated with S. enteritidis were placed into PAW for 30 s, 60 s, 90 s, or 120 s with a plasma on-site treatment in the water. More than a 4 log reduction was obtained with 60-s and 120-s treatments. The results showed that the freshness indexes of the eggs treated with PAW were similar to those of the untreated controls and better than those of the eggs treated with commercial processes. In addition, observation under a scanning electron microscope also showed less surface damage of the cuticle on the PAW-treated eggs than on the commercially treated eggs. The results of this study indicate that PAW could be an effective antibacterial agent with less damage to the freshness of shell eggs than commercial methods.

Eggs are one of the most commonly consumed food items. Currently, chlorine washing is the most common method used to sanitize shell eggs. However, chlorine could react with organic matters to form a potential carcinogen, trihalomethanes, which can have a negative impact on human health. Plasma-activated water (PAW) has been demonstrated to inactivate microorganisms effectively without compromising the sensory qualities of shell eggs. For this study, various amounts (250, 500, 750, or 1000 mL) of PAW were generated by using one or two plasma jet(s) at 60 watts for 20 min with an air flow rate at 6 or 10 standard liters per minute (slm). After being inoculated with 7.0 log CFU Salmonella Enteritidis, one shell egg was placed into PAW for 30, 60, or 90 s with 1 or 2 acting plasma jet(s). When 2 plasma jets were used in a large amount of water (1000 mL), populations of S. Enteritidis were reduced from 7.92 log CFU/egg to 2.84 CFU/egg after 60 s of treatment. In addition, concentrations of ozone, hydrogen peroxide, nitrate, and nitrite in the PAW were correlated with the levels of antibacterial efficacy. The highest concentrations of ozone (1.22 ppm) and nitrate (55.5 ppm) were obtained with a larger water amount and lower air flow rate. High oxidation reduction potential (ORP) and low pH values were obtained with longer activation time, more plasma jet, and a lower air flow rate. Electron paramagnetic resonance (EPR) analyses demonstrated that reactive oxygen species (ROS) were generated in the PAW. The observation under the scanning electron microscope (SEM) revealed that bacterial cells were swollen, or even erupted after treatment with PAW. These results indicate that the bacterial cells lost control of cell permeability after the PAW treatment. This study shows that PAW is effective against S. Enteritidis on shell eggs in a large amount of water. Ozone, nitrate, and ROS could be the main causes for the inactivation of bacterial cells.

In this paper, a plasma-induced hemi-wicking phenomenon observed on hydrophobic sanded polymer surfaces, polypropylene (PP), polyethylene terephthalate (PET) and polyethylene (PE) is reported. An atmospheric-pressure argon plasma jet was used to treat a limited area of the carefully sanded polymer surfaces to induce the hemi-wicking phenomenon. Such hemi-wicking triggered by the plasma activation is different from the traditional type, which is achieved purely by the surface topography. Surface analyses by X-ray photoelectron spectroscopy (XPS) and water contact analysis (WCA) show that the combination of sanding and plasma treatment increased the oxygen-to-carbon ratio, which is highly beneficial for surface hydrophilicity. The shear stress tests show that the combination of sanding and plasma treatment can enhance the shear stress by 125%, 95%, and 296% on PP, PET, and PE, respectively. The study shows that the newly developed technique by combining the sanding and plasma processing for polymers could be a potentially useful method in future industry applications.