The search for innovation and biotechnological strategies in the biodiesel production chain have become a topic of interest for scientific community owing the importance of renewable energy sources. This work aimed to implement an enzymatic transesterification process to obtain biodiesel from waste frying oil (WFO). The transesterification was performed by varying reaction times (8 h, 12 h and 16 h), enzyme concentrations of lipase XX 25 split (14%, 16% and 18%), pH of reaction media (6, 7 and 8) and reaction temperature (35, 38 and 40 °C) with a fixed alcohol–oil molar ratio of 3:1. The optimum operating conditions were selected to quantify the amount of fatty acid methyl esters (FAMEs) generated. The highest biodiesel production was reached with an enzyme concentration of 14%, reaction time of 8 h, pH of 7 and temperature of 38 °C. It was estimated a FAMEs production of 42.86% for the selected experiment; however, best physicochemical characteristics of biodiesel were achieved with an enzyme concentration of 16% and reaction time of 8 h. Results suggested that enzymatic transesterification process was favorable because the amount of methyl esters obtained was similar to the content of fatty acids in the WFO.
1 July 2016 in AiBi Revista de Investigación, Administración e Ingeniería
This document defines the methodology for standardizing the normative management model of CENS - Grupo EPM. To develop this methodology, a diagnosis of the current model was conducted using a structured questionnaire that determined the extent of the staff´s knowledge of policy management. Applied normative elements and implemented management systems were also analyzed, identifying those requirements that can be fulfilled through regulatory means. Finally, the current regulatory model of CENS was compared with the model of other electrical companies in Colombia and Mexico, highlighting flaws that require adaptations to the current regulatory model. Those adaptations will contribute to the successful execution of the processes and will help to meet the requirements of the management systems, all of which aim to strengthen the rules regarding the four regulatory elements discussed in Bussines Process Management. El presente documento define la metodología para la estandarización del modelo normativo de CENS - Grupo EPM, para su construcción se realizó un diagnóstico del modelo actual aplicando un cuestionario estructurado que determinó el grado de conocimiento del personal sobre la Gestión Normativa, así mismo, se analizaron los elementos normativos aplicados y los sistemas de gestión implementados, identificando requisitos a los que pueda darse cumplimiento a través de elementos normativos, finalmente se comparó el modelo normativo actual de CENS con el modelo de otras empresas del sector eléctrico en Colombia y en México, evidenciando falencias que requerían adecuar el modelo normativo actual a fin que se convierta en un aporte para la operacionalización de los procesos y permita cumplir los requisitos establecidos en los sistemas de gestión, por lo que se propone consolidar las normas en cuatro elementos normativos con enfoque Bussines Process Managment.
1 November 2018 in Journal of Physics: Conference Series
This research sought to simulate gasification of palm kernel shell (PKS) in stationary state by using Aspen PLUS®. The model can predict the syngas composition with 1.6% absolute error. Biomass is defined as a non-conventional component from its proximate and ultimate analyses. The gasification process was divided into four stages: drying, pyrolysis, oxidation, and reduction, simulated in two R-Yield and R-Equil reactors, specified through the physicochemical characterization of the PKS and the chemical reactions in equilibrium intervening in the gasification. Simulation results were validated with experimental results from other investigations with similar operating conditions. Production of H2 and CO2 increases by increasing temperature from 700 to 900°C, contrary to what occurs with CO that diminishes at higher temperatures. The steam/biomass (S/B) ratio has a significant effect on the proportion of H2 in the syngas, given that it diminishes significantly by 20.3% upon increasing the S/B ratio from 1.5 to 2.5, showing the same trend for the CO and CO2 gases.