The iterative closest point (ICP) algorithm is widely used in three-dimensional (3D) point cloud registration, and it is very stable and robust. However, its biggest drawback is being easily trapped in a local optimal solution, which results in the incorrect registration result. Currently, there is neither a clear effective range to define whether the ICP algorithm will fall into a local optimum nor a study providing a comprehensive evaluation of the ICP algorithm. In this paper, we take the overlap ratio, angle, distance, and noise as the influencing factors of ICP and evaluate the validity, robustness, accuracy, and efficiency of point-to-point and point-to-plane ICP by using four datasets. We first analyze the effective ranges of the two ICP algorithms with respect to overlap ratio, angle, and distance and then propose a universal effective range for the three factors. Next, the effect of Gaussian noise on the validity and accuracy of two ICPs is evaluated. We also analyze the factors influencing ICP accuracy and explain their changing rules. We finally study the effect of different parameters on the efficiency. All results are compared by using point-to-point and point-to-plane ICP algorithms. The results show that the overlap ratio has no effect on validity, but it has a significant influence on accuracy. The angle has a great impact on the validity and efficiency of ICP but has no effect on accuracy. The distance only affects validity, has a limited effect on efficiency and no effect on accuracy. Meanwhile, Gaussian noise has a little effect on the validity. In addition, the general effective range of point-to-point ICP is larger than that of point-to-plane ICP, but the point-to-plane ICP algorithm presents a better efficiency. The point-to-point ICP is more robust to Gaussian noise with respect to validity, while the point-to-plane is more resistant in terms of accuracy.

Global navigation satellite system interferometric reflectometry (GNSS-IR) represents an extra method to detect snow depth for climate research and water cycle managing. However, using a single frequency of GNSS-IR for snow depth retrieval is often found to be challenging when attempting to achieve a high spatial and temporal sensitivity. To evaluate both the capability of the GNSS-IR snow depth retrieved by the multi-GNSS system and multi-frequency from signal-to-noise ratio (SNR) data, the accuracy of snow depth retrieval by different frequency signals from the multi-GNSS system is analyzed, and a joint retrieval is carried out by combining the multi-GNSS system retrieval results. The SNR data of the global positioning system (GPS), global orbit navigation satellite system (GLONASS), Galileo satellite navigation system (Galileo), and BeiDou navigation satellite system (BDS) from the P387 station of the U.S. Plate Boundary Observatory (PBO) are analyzed. A Lomb–Scargle periodogram (LSP) spectrum analysis is used to compare the difference in reflector height between the snow-free and snow surfaces in order to retrieve the snow depth, which is compared with the PBO snow depth. First, the different frequency retrieval results of the multi-GNSS system are analyzed. Then, the retrieval accuracy of the different GNSS systems is analyzed through multi-frequency mean fusion. Finally, the joint retrieval accuracy of the multi-GNSS system is analyzed through mean fusion. The experimental shows that the retrieval results of different frequencies of the multi-GNSS system have a strong correlation with the PBO snow depth, and that the accuracy is better than 10 cm. The multi-frequency mean fusion of different GNSS systems can effectively improve the retrieval accuracy, which is better than 7 cm. The joint retrieval accuracy of the multi-GNSS system is further improved, with a correlation coefficient (R) between the retrieval snow depth and the PBO snow depth of 0.99, and the accuracy is better than 3 cm. Therefore, using multi-GNSS and multi-frequency data to retrieve the snow depth has a good accuracy and feasibility.

Global navigation satellite system interferometric reflectometry (GNSS-IR) is a new type of microwave remote sensing technology that can measure soil moisture content (SMC). GNSS-IR soil moisture retrieval methods based on the satellite signal-to-noise ratio (SNR) and triple-frequency signal combination have the following shortcomings: SNR does not always exist in the original GNSS file, and the number of triple-frequency signal observation satellites is small, resulting in GNSS-IR soil moisture observation time resolution being low. Based on the above problems, in this study, we constructed a soil moisture inversion method based on multisatellite dual-frequency combined multipath error is proposed: the multipath error calculation model of dual-frequency carrier phase (L4 Ionosphere Free, L4_IF) and dual-frequency pseudorange (DFP) without ionospheric effect is constructed. We selected the data of the five epochs before and after the time point of the effective satellite period to construct the multipath error model and error equation, and we solved the delay phase for soil moisture retrieval. We verified the method using Plate Boundary Observatory (PBO) P041 site data. The results showed that the Pearson correlation coefficients (R) of L4_IF and DFP methods at P041 station are 0.97 and 0.91, respectively. To better verify the results’ reliability and the proposed method’s effectiveness, the soil moisture data of the MFLE station about 210 m away from P041 station are used as the verification data in this paper. The results showed that the delay phase solved by multipath error and soil moisture strongly correlate. Pearson correlation coefficients (R) of L4_IF and DFP methods at MFLE station are 0.93 and 0.86, respectively. In order to improve the inversion accuracy of GNSS-IR soil moisture, this paper constructs the prediction model of soil moisture by using the linear regression (ULR), back propagation neural network (BPNN) and radial basis function neural network (RBFNN), and evaluates the accuracy of each model. The results showed that the soil moisture retrieval method based on multisatellite dual-frequency combined multipath error can replace the traditional retrieval method and effectively improve the time resolution of GNSS-IR soil moisture estimation. To perform highly dynamic monitoring of soil moisture, higher retrieval accuracy can only be obtained with a small epoch multipath error.

Three-dimensional (3D) point cloud registration is an important step in three-dimensional (3D) model reconstruction or 3D mapping. Currently, there are many methods for point cloud registration, but these methods are not able to simultaneously solve the problem of both efficiency and precision. We propose a fast method of global registration, which is based on RGB (Red, Green, Blue) value by using the four initial point pairs (FIPP) algorithm. First, the number of different RGB values of points in a dataset are counted and the colors in the target dataset having too few points are discarded by using a color filter. A candidate point set in the source dataset are then generated by comparing the similarity of colors between two datasets with color tolerance, and four point pairs are searched from the two datasets by using an improved FIPP algorithm. Finally, a rigid transformation matrix of global registration is calculated with total least square (TLS) and local registration with the iterative closest point (ICP) algorithm. The proposed method (RGB-FIPP) has been validated with two types of data, and the results show that it can effectively improve the speed of 3D point cloud registration while maintaining high accuracy. The method is suitable for points with RGB values.