Eby Friedman

Prof. Dr. Eby Friedman

Department of Electrical and Computer Engineering, University of Rochester, Rochester, NY 14627, USA

Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 March 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TJTahereh Jabbari
Tahereh Jabbari
GKGleb Krylov
Gleb Krylov
SWStephen Whiteley
Stephen Whiteley
EMEric Mlinar
Eric Mlinar
JKJamil Kawa
Jamil Kawa
Eby FriedmanEby Friedman
Eby Friedman
The increasing complexity of modern RSFQ circuits has made on-chip signal routing an issue of growing importance. In this paper, several methods for routing large scale RSFQ circuits are described, and a process is presented for determining when to use passive microstrip transmission lines (PTL) and active Josephson transmission lines (JTL). The effect of the size of the JTL inductor and Josephson junctions on the length of a JTL chain for a target delay is also discussed. The dependence of the JTL inductance on the physical layout is evaluated, and the effects of the primary PTL parameters on delay are characterized. A novel PTL driver and receiver configuration is also proposed. Tradeoffs among the number of JJs, inductance, and length of a PTL stripline in the receiver and driver circuits are reported. The energy dissipation is evaluated for two different interconnects. A tradeoff between the proposed PTL circuits and an optimized JTL in terms of energy dissipation and delay is discussed. Guidelines for choosing the optimal element values are determined, and a simulated bias margin of ±29% for the bias current of the proposed receiver operating at 20 GHz in a $\rm 10 kA/cm^2$ technology for a 1 mm transmission line is achieved. Summarizing, guidelines and design tradeoffs appropriate for automated layout and synthesis are provided for driving long interconnect in SFQ VLSI circuits.

9 June 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TJTahereh Jabbari
Tahereh Jabbari
GKGleb Krylov
Gleb Krylov
SWStephen Whiteley
Stephen Whiteley
JKJamil Kawa
Jamil Kawa
Eby FriedmanEby Friedman
Eby Friedman
Superconductive passive transmission lines (PTL) are widely used for signal routing in large-scale rapid single flux quantum (RSFQ) circuits. Due to the imperfect matching of the transmission lines between the driver and receiver, single flux quantum (SFQ) pulses are partially reflected. The round trip propagation time of these reflections can coincide with the following SFQ pulse, resulting in a decrease in bias margins or incorrect circuit behavior. This resonant effect depends upon the length of the PTL and the clock frequency of the signal. A methodology to reduce and manage this effect is the focus of this article. A closed-form expression describing the dependence of the resonance frequency on the length of the PTL is presented. This expression describes a set of forbidden lengths for PTL interconnect segments in RSFQ circuits. The proposed methodology and algorithm insert active PTL-based repeaters into long superconductive interconnect while ensuring the length of the line segment is outside the forbidden region and increasing bias margins.

23 September 2020 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
GKGleb Krylov
Gleb Krylov
Eby FriedmanEby Friedman
Eby Friedman
Rapid single-flux quantum (RSFQ) circuits have recently attracted considerable attention as a promising cryogenic beyond CMOS technology for exascale computing. Energy-efficient RSFQ (ERSFQ) is an energy-efficient, inductive bias scheme for RSFQ circuits, where the power dissipation is drastically lowered by eliminating the bias resistors, while the cell library remains unchanged. An ERSFQ bias scheme requires the introduction of multiple circuit elements--current limiting Josephson junctions, bias inductors, and feeding Josephson transmission lines (FJTLs). In this article, parameter guidelines and design techniques for ERSFQ circuits are presented. The proposed guidelines enable more robust circuits resistant to severe variations in supplied bias currents. Trends are considered, and advantageous tradeoffs are discussed for the different components within a bias network. The guidelines provide a means to decrease the size of an FJTL and, thereby, reduce the physical area, power dissipation, and overall bias currents, supporting further increases in circuit complexity. A distributed approach to ERSFQ FJTL is also presented to simplify placement and minimize the effects of the parasitic inductance of the bias lines. This methodology and related circuit techniques are applicable to automating the synthesis of bias networks to enable large-scale ERSFQ circuits.

5 April 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TJTahereh Jabbari
Tahereh Jabbari
GKGleb Krylov
Gleb Krylov
JKJamil Kawa
Jamil Kawa
Eby FriedmanEby Friedman
Eby Friedman
The increasing complexity of modern rapid single flux quantum (RSFQ) circuits has made the issue of multiple fanout of growing importance. Most RSFQ gates can only drive a single output. Splitter gates can however distribute an SFQ pulse to multiple fanout. To drive N SFQ gates, N-1 splitters with a fanout of two are required. Large splitter trees are often used in high speed VLSI complexity SFQ systems. These splitters require significant area and increase the path delay. In this paper, three area and power efficient splitter topologies for large scale RSFQ circuits are introduced. These SFQ splitters are an active splitter tree with fewer JJs, a passive splitter, and a multi-output active splitter. A methodology is presented for determining when to use passive or active splitters. Tradeoffs among the number of JJs, bias current of each stage, and delay are reported along with a margin analysis. The proposed splitters greatly reduce the required bias currents and delay of large scale RSFQ circuits by enabling multiple fanout. The methodologies and techniques are applicable to automated layout and clock tree synthesis for large scale SFQ integrated circuits.

4 March 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GKGleb Krylov
Gleb Krylov
Eby FriedmanEby Friedman
Eby Friedman
Among the major issues in modern large scale rapid single flux quantum circuits are the complexity of the clock network, tight timing tolerances, poor applicability of existing CMOS EDA techniques, and extremely deep pipelines which reduce the effective clock frequency. In this paper, asynchronous dynamic SFQ majority gates are proposed to solve some of these problems. The proposed logic gates exhibit high bias margins and do not require significant area or a large number of Josephson junctions as compared to existing RSFQ logic gates. These gates exhibit a tradeoff among the input skew tolerance, clock frequency, and bias margins. Asynchronous logic gates greatly reduce the complexity of the clock network in large scale RSFQ circuits, thereby alleviating certain timing issues and reducing the required bias currents. Furthermore, asynchronous logic allows existing EDA tools to utilize CMOS approaches for synthesis, verification, and testability. The adoption of majority logic in complex RSFQ circuits also reduces the pipeline depth, enabling higher clock speeds in VLSI RSFQ circuits.

5 October 2017 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
GKGleb Krylov
Gleb Krylov
Eby FriedmanEby Friedman
Eby Friedman
Test point insertion and set/scan techniques for enhanced testability in superconductive single-flux-quantum (SFQ) logic are proposed here. Test point insertion reduces the overhead of a set/scan chain while maintaining most of the functionality. Multiple ways of replacing costly (in terms of the number of Josephson junctions) SFQ multiplexers with mergers and blocking gates are proposed. The multiplexer control signals are replaced with a gated clock signal or separate bias networks for both functional and test paths. Clocked blocking gates or current-controlled Josephson transmission line segments are used to disable undesired data inputs. The clocked blocking gates for test point insertion in a 64-bit register requires 35% fewer Josephson junctions as compared to multiplexers. This advantage further increases for current-controlled blocking gates. Set/scan chain and test point insertion techniques are applied to several SFQ circuits to evaluate error characteristics and to provide built-in self-test of SFQ-compatible memory systems.