Stephen Whiteley

Stephen Whiteley

Auto-generated profile, based on publicly available information

Stephen Whiteley

Synopsys, Inc., Mountain View, CA, USA

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 March 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TJTahereh Jabbari
Tahereh Jabbari
GKGleb Krylov
Gleb Krylov
SWStephen Whiteley
Stephen Whiteley
EMEric Mlinar
Eric Mlinar
JKJamil Kawa
Jamil Kawa
Eby FriedmanEby Friedman
Eby Friedman
The increasing complexity of modern RSFQ circuits has made on-chip signal routing an issue of growing importance. In this paper, several methods for routing large scale RSFQ circuits are described, and a process is presented for determining when to use passive microstrip transmission lines (PTL) and active Josephson transmission lines (JTL). The effect of the size of the JTL inductor and Josephson junctions on the length of a JTL chain for a target delay is also discussed. The dependence of the JTL inductance on the physical layout is evaluated, and the effects of the primary PTL parameters on delay are characterized. A novel PTL driver and receiver configuration is also proposed. Tradeoffs among the number of JJs, inductance, and length of a PTL stripline in the receiver and driver circuits are reported. The energy dissipation is evaluated for two different interconnects. A tradeoff between the proposed PTL circuits and an optimized JTL in terms of energy dissipation and delay is discussed. Guidelines for choosing the optimal element values are determined, and a simulated bias margin of ±29% for the bias current of the proposed receiver operating at 20 GHz in a $\rm 10 kA/cm^2$ technology for a 1 mm transmission line is achieved. Summarizing, guidelines and design tradeoffs appropriate for automated layout and synthesis are provided for driving long interconnect in SFQ VLSI circuits.

9 June 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TJTahereh Jabbari
Tahereh Jabbari
GKGleb Krylov
Gleb Krylov
SWStephen Whiteley
Stephen Whiteley
JKJamil Kawa
Jamil Kawa
Eby FriedmanEby Friedman
Eby Friedman
Superconductive passive transmission lines (PTL) are widely used for signal routing in large-scale rapid single flux quantum (RSFQ) circuits. Due to the imperfect matching of the transmission lines between the driver and receiver, single flux quantum (SFQ) pulses are partially reflected. The round trip propagation time of these reflections can coincide with the following SFQ pulse, resulting in a decrease in bias margins or incorrect circuit behavior. This resonant effect depends upon the length of the PTL and the clock frequency of the signal. A methodology to reduce and manage this effect is the focus of this article. A closed-form expression describing the dependence of the resonance frequency on the length of the PTL is presented. This expression describes a set of forbidden lengths for PTL interconnect segments in RSFQ circuits. The proposed methodology and algorithm insert active PTL-based repeaters into long superconductive interconnect while ensuring the length of the line segment is outside the forbidden region and increasing bias margins.

19 January 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
EMEric Mlinar
Eric Mlinar
SWStephen Whiteley
Stephen Whiteley
ABAnton Belov
Anton Belov
SCSong Chen
Song Chen
LALuca Amaru
Luca Amaru
JKJamil Kawa
Jamil Kawa
Josephson Junction-based superconducting circuits are promising candidates for high-speed digital electronics with dramatically lower power consumption than CMOS, as well as a potential enabler towards the implementation of large-scale quantum computing. In this paper, we will describe an automated flow for the creation of microcontrollers and other digital systems in the single flux quantum (SFQ) technology. Starting with a register-transfer level (RTL) description of the circuit, the flow integrates logic synthesis, technology mapping, timing and logic verification, library cell placement and routing, and completes with a candidate physical design for fabrication. The flow makes use of the same tools employed in leading-edge CMOS. We will examine the challenges specific to the SFQ technology at the different stages in this flow. We will also report on metrics to qualify the resulting physical layout, such as circuit density and timing results.

29 March 2023 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
TTTomoyuki Tanaka
Tomoyuki Tanaka
CAChristopher L. Ayala
Christopher L. Ayala
SWStephen Whiteley
Stephen Whiteley
EMEric Mlinar
Eric Mlinar
ABAaron Barker
Aaron Barker
NYNobuyuki Yoshikawa
Nobuyuki Yoshikawa
The adiabatic quantum-flux-parametron (AQFP) circuit is a superconductor digital logic family with extremely low power consumption. It consumes five orders less power than the state-of-the-art CMOS circuits and three orders of magnitude less power than RSFQ circuits, another competing digital superconductor technology. The computing resources required by society are increasing every year, and the AQFP circuit is a strong candidate for the next generation of computers. In previous research, a 4-bit MANA microprocessor and a 16-bit Kogge-Stone adder using AQFP logic were designed and demonstrated. These circuits were designed almost by hand, and the development environment needs to be improved to implement AQFP circuits for practical applications. So, we used Synopsys EDA tools typically used for CMOS design to create a full-custom design flow for logic cell design and a top-down flow to design combinational logic circuits automatically. We integrated a circuit design editor with simulation and verification tools for the full-custom design flow. For the top-down flow, we created an environment that automatically performs logic synthesis, path balancing, cell placement, and signal and excitation routing. 1024-bit adders with more than two million Josephson junctions (JJs) have been successfully designed.

26 December 2022 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
SWStephen Whiteley
Stephen Whiteley
ABAaron Barker
Aaron Barker
EMEric Mlinar
Eric Mlinar
JKJamil Kawa
Jamil Kawa
SMSukanya S. Meher
Sukanya S. Meher
AIAmol Inamdar
Amol Inamdar
We have developed a microscopic tunneling Josephson junction compact model (TJM) framework and incorporated this in the Synopsys HSPICE commercial circuit simulator. Our model follows the Odintsov, Semenov, and Zorin (OSZ) approach, whereby tunnel current amplitude tables are reduced to a fitting parameter set, which is accessed by the simulator compact model. In addition, our model takes into account the computed BCS energy gap as a function of temperature and uses a table-lookup technique for rapid generation of temperature-specific parameters, enabling efficient temperature sweep and Monte-Carlo variation. This avoids the rather long computations required for generation of fit parameters for specific temperatures. Initially we will review the algorithms and features of our TJM model, then we will report simulation results of our model focusing on comparison to results using the standard RSJ model.

1 July 1998 in Applied Superconductivity
Verified
Journal Article
Closed access
NYNobuyuki Yoshikawa
Nobuyuki Yoshikawa
ZDZ.JOhn Deng
Z.JOhn Deng
SWStephen R Whiteley
Stephen R Whiteley
TDTheodore Van Duzer
Theodore Van Duzer