Recent advances in the field of bioprinting have led to the development of perfusable complex structures. However, most of the existing printed vascular channels lack the composition or key structural and physiological features of natural blood vessels or they make use of more easily printable but less biocompatible hydrogels. Here, we use a drop-on-demand bioprinting technique to generate in vitro blood vessel models, consisting of a continuous endothelium imitating the tunica intima, an elastic smooth muscle cell layer mimicking the tunica media, and a surrounding fibrous and collagenous matrix of fibroblasts mimicking the tunica adventitia. These vessel models with a wall thickness of up to 425 µm and a diameter of about 1 mm were dynamically cultivated in fluidic bioreactors for up to three weeks under physiological flow conditions. High cell viability (>83%) after printing and the expression of VE-Cadherin, smooth muscle actin, and collagen IV were observed throughout the cultivation period. It can be concluded that the proposed novel technique is suitable to achieve perfusable vessel models with a biofunctional multilayer wall composition. Such structures hold potential for the creation of more physiologically relevant in vitro disease models suitable especially as platforms for the pre-screening of drugs.
Conjugated polymer nanoparticles exhibit strong fluorescence and have been applied for biological fluorescence imaging in cell culture and in small animals. However, conjugated polymer particles are hydrophobic and often chemically inert materials with diameters ranging from below 50 nm to several microns. As such, conjugated polymer nanoparticles cannot be excreted through the renal system. This drawback has prevented their application for clinical bio-medical imaging. Here, we present fully conjugated polymer nanoparticles based on imidazole units. These nanoparticles can be bio-degraded by activated macrophages. Reactive oxygen species induce scission of the conjugated polymer backbone at the imidazole unit, leading to complete decomposition of the particles into soluble low molecular weight fragments. Furthermore, the nanoparticles can be surface functionalized for directed targeting. The approach opens a wide range of opportunities for conjugated polymer particles in the fields of medical imaging, drug-delivery, and theranostics.
A generic, facile, and waterborne strategy is introduced to fabricate flexible, low‐cost nanocomposite films with room‐temperature phosphorescence (RTP) by incorporating waterborne RTP polymers into self‐assembled bioinspired polymer/nanoclay nanocomposites. The excellent oxygen barrier of the lamellar nanoclay structure suppresses the quenching effect from ambient oxygen (kq) and broadens the choice of polymer matrices towards lower glass transition temperature (Tg), while providing better mechanical properties and processability. Moreover, the oxygen permeation and diffusion inside the films can be fine‐tuned by varying the polymer/nanoclay ratio, enabling programmable retention times of the RTP signals, which is exploited for transient information storage and anti‐counterfeiting materials. Additionally, anti‐interception materials are showcased by tracing the interception‐induced oxygen history that interferes with the preset self‐erasing time. Merging bioinspired nanocomposite design with RTP materials contributes to overcoming the inherent limitations of molecular design of organic RTP compounds, and allows programmable temporal features to be added into RTP materials by controlled mesostructures. This will assist in paving the way for practical applications of RTP materials as novel anti‐counterfeiting materials.
Polydimethylsiloxane is a translucent and biologically inert silicone material used in sealants, biomedical implants and microscale lab-on-a-chip devices. Furthermore, in membrane technology, polydimethylsiloxane represents a material for separation barriers as it has high permeabilities for various gases. The facile handling of two component formulations with a silicone base material, a catalyst and a small molecular weight crosslinker makes it widely applicable for soft-lithographic replication of two-dimensional device geometries, such as microfluidic chips or micro-contact stamps. Here, we develop a new technique to directly print polydimethylsiloxane in a rapid prototyping device, circumventing the need for masks or sacrificial mold production. We create a three-dimensional polydimethylsiloxane membrane for gas–liquid-contacting based on a Schwarz-P triple-periodic minimal-surface, which is inaccessible with common machining techniques. Direct 3D-printing of polydimethylsiloxane enables rapid production of novel chip geometries for a manifold of lab-on-a-chip applications.