Lead-containing piezoelectric materials typically show the highest energy conversion efficiencies, but due to their toxicity they will be limited in future applications. In their bulk form, the piezoelectric properties of lead-free piezoelectric materials are significantly lower than lead-containing materials. However, the piezoelectric properties of lead-free piezoelectric materials at the nano scale can be significantly larger than the bulk scale. This review looks at the suitability of ZnO nanostructures as candidate lead-free piezoelectric materials for use in piezoelectric nanogenerators (PENGs) based on their piezoelectric properties. Of the papers reviewed, Neodymium-doped ZnO nanorods (NRs) have a comparable piezoelectric strain constant to bulk lead-based piezoelectric materials and hence are good candidates for PENGs. Piezoelectric energy harvesters typically have low power outputs and an improvement in their power density is needed. This review systematically reviews the different composite structures of ZnO PENGs to determine the effect of composite structure on power output. State-of-the-art techniques to increase the power output of PENGs are presented. Of the PENGs reviewed, the highest power output belonged to a vertically aligned ZnO nanowire (NWs) PENG (1-3 nanowire composite) with a power output of 45.87 μW/cm2 under finger tapping. Future directions of research and challenges are discussed.
The highest energy conversion efficiencies are typically shown by lead-containing piezoelectric materials, but the harmful environmental impacts of lead and its toxicity limit future use. At the bulk scale, lead-based piezoelectric materials have significantly higher piezoelectric properties when compared to lead-free piezoelectric materials. However, at the nanoscale, the piezoelectric properties of lead-free piezoelectric material can be significantly larger than the bulk scale. The piezoelectric properties of Poly(vinylidene fluoride) (PVDF) and Poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) lead-free piezoelectric nanomaterials are reviewed and their suitability for use in piezoelectric nanogenerators (PENGs) is determined. The impact of different PVDF/PVDF-TrFE composite structures on power output is explained. Strategies to improve the power output are given. Overall, this review finds that PVDF/PVDF-TrFE can have significantly increased piezoelectric properties at the nanoscale. However, these values are still lower than lead-free ceramics at the nanoscale. If the sole goal in developing a lead-free PENG is to maximize output power, lead-free ceramics at the nanoscale should be considered. However, lead-free ceramics are brittle, and thus encapsulation of lead-free ceramics in PVDF is a way to increase the flexibility of these PENGs. PVDF/PVDF-TrFE offers the advantage of being nontoxic and biocompatible, which is useful for many applications.
Long-term installation of ultrasonic transducers in high temperature environments allows for continuous monitoring of critical components and processes without the need to halt industrial operations. Transducer designs based on the high-Curie-point piezoelectric material lithium niobate have been shown to both be effective and stable at extreme temperatures for long-term installation. In this study, several brazing techniques are evaluated, all of which aim to provide both mechanical bonding and acoustic coupling directly to a bare lithium niobate piezoelectric element. Two brazing materials—a novel silver-copper braze applied in a reactive air environment and an aluminum-based braze applied in a vacuum environment—are found to be suitable for ultrasound transmission at elevated temperatures. Reliable wide-bandwidth and low-noise ultrasound transmission is achieved between room temperature and 800 °C.