We report on an accurate closed-form analytical model for the gain of a Brillouin fiber amplifier that accounts for material loss in the depleted pump regime. We determined the operational model limits with respect to its relevant parameters and pump regimes through both numerical and experimental validation. As such, our results enable accurate performance prediction of Brillouin fiber amplifiers operating in the weak-pump, high-gain, and saturation regimes alike.
We provide an accurate analytic expression for the Brillouin fiber amplifiers (BFAs) gain in the regime of pump depletion. The solutions are divided into three parts. In the first part, we review the weak pump regime where the highly accurate second-order corrected undepleted-pump-approximation-based solution is adopted; in the high-gain regime where both the fiber loss and nonlinear term are nonnegligible effects and need to be accounted for along with the pump depletion; and in the saturation regime where the Stokes power is at the rear end exceeds critical power. We provide an accurate analytic expression for the BFA gain and show results of experimental validation. The presented analysis can be used to accurately predict the performance of Brillouin fiber amplifiers working in any regime.
We present a comprehensive analysis of the technique of Longitudinal-Mode-Filling (LMF) to reduce Stimulated Brillouin Scattering (SBS) limitations in Ytterbium Doped Fibre Amplifiers (YDFA), for the generation of nanosecond, temporally shaped pulses. A basic Master-Oscillator-Power-Amplifier (MOPA) system, comprising an output YDFA with 10µm-core active fibre, is experienced for benchmarking purposes. Input pulse-shaping is operated thanks to direct current modulation in highly multimode laser-diode seeds, either based on the use of Distributed Feed-Back (DFB) or of a Fibre Bragg Grating (FBG). These seeds enable wavelength control. We verify the effectiveness of the combination of LMF, with appropriate mode spacing, in combination with natural chirp effects from the seed to control the SBS threshold in a broad range of output energies, from a few to some tens of µJ. These variations are discussed versus all the parameters of the laser system. In accordance with the proposal of a couple of basic principles and with the addition of gain saturation effects along the active fibre, we develop a full-vectorial numerical model. Fine fits between experimental results and theoretical expectations are demonstrated. The only limitation of the technique arises from broadband beating noise, which is analysed thanks to a simplified, but fully representative description to discuss the signal-to-noise ratio of the amplified pulses. This provides efficient tools for application to the design of robust and cost-effective MOPAs, aiming to the generation of finely shaped and energetic nanosecond pulses without the need for any additional electro-optics.
8 March 2011 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Purpose – The purpose of this paper is to demonstrate an effective and robust numerical solution for Raman fiber amplifier (RFA) equations which have no explicit solution. MATLAB BVP solvers are addressed for the solution. Design/methodology/approach – The continuation method proposed for the solution of RFA equations using MATLAB BVP solvers is explained. Scripts for improving the power values at the boundaries with continuation, extending fiber length with continuation and calculation of the analytical partial derivatives using the MATLAB Symbolic toolbox are introduced. Comparisons among the different MATLAB BVP solvers have been made. Using the continuation method, signal evolutions for different kinds of RFA amplifier configurations are plotted. Findings – The paper finds that MATLAB BVP solver with the continuation method can be used in the design of various kinds of RFAs for high powers/long gain fiber spans. Research limitations/implications – The paper will assist the fiber optic research community who suffer from two or more point boundary-value problems. Moreover, the stiffness of the signal evolution which is faced with high pump powers and/or long fiber lengths can be solved with continuation. This superiority of the solver can be used to overcome any stiff changes of the signals for future studies. Practical implications – The increased research interests and practical demands for RFAs have been calling for reasonable and efficient means for the performance evaluation of RFAs before the real amplifiers are fabricated. The solution method presented in this paper will be an efficient means for the solution of this issue. Originality/value – MATLAB BVP solvers have been proven to be effective for the numerical solution of RFAs with multiple pumps and signal waves. Using the continuation method, in a distributed RFA with ten pump sources, 2,400?mW total input pump power is achieved. The improvement of the total power is about 1.4 times compared with those of the previously reported methods. Using the MATLAB BVP solvers, total power/fiber span can be improved further using the continuation process with the cost of computational time. This is a notable and promising improvement from a RFA designer's point of view.
26 July 2013 in Journal of the European Optical Society-Rapid Publications
The spectral and temporal evolution of distributed sensing based on stimulated Brillouin scattering (SBS) in optical fibers for several-nanosecond Stokes pulses is demonstrated by using the method of lines (MOL) solution of the transient SBS equations. A superbee flux limiter is utilized to avoid numerical damping and dispersion that would otherwise be brought on by the approximation of spatial derivatives associated with the partial differential equations (PDEs). In order to increase computational efficiency, an approach is adopted whereby the sparse PDE Jacobian matrix integrator option of the ODE solver(s) is employed. Simulation examples of SBS-based sensing for fibers containing sections with different Brillouin frequencies are presented. To the best of our knowledge, this MOL solution is proposed for the first time for modeling of the transient SBS equations for nanosecond Stokes pulses with different waveforms in a SBS based fiber optic sensor.