We report on an accurate closed-form analytical model for the gain of a Brillouin fiber amplifier that accounts for material loss in the depleted pump regime. We determined the operational model limits with respect to its relevant parameters and pump regimes through both numerical and experimental validation. As such, our results enable accurate performance prediction of Brillouin fiber amplifiers operating in the weak-pump, high-gain, and saturation regimes alike.
This letter presents CMOS-MEMS fixed-fixed beam resonators with wide active frequency tuning range capability attributed to the axial stress modulation using embedded heaters. Two resonators, consisting of multiple metal, dielectric layers, and poly1 layers, were designed; the first resonator at 303.4 kHz, while the second at 2053 kHz, achieve the frequency tuning ranges of 35.7%-42.6%, respectively. Electrostatic transduction is achieved by embedded metal beams, and used to drive the device into resonance. The heaters, made of poly1, are embedded directly into the resonators during the CMOS process to achieve low power consumption and optimum heating efficiency. A power consumption of 900 μW/beam is achieved for the first design of 152 μm length beam, while providing a frequency tuning of 35.7%.
This paper presents the enhancement in frequency shift per Celsius for high temperature sensitive applications of microresonators. Using materials with different coefficients of thermal expansion in a substrate and beam, larger axial load on fixed ends are demonstrated. This results in a larger frequency shift with the increase in the ambient temperature. An analytical model is presented that closely matches simulation and measurement results. The 120 μm CMOS-MEMS fixed-fixed beam resonators, consisting of multiple metal, dielectric layers, and polysilicon layer, were designed and measured with a center frequency around 640 kHz. A sensitivity up to -2983 Hz/°C is achieved without sacrificing stiffness constant.
We provide an accurate analytic expression for the Brillouin fiber amplifiers (BFAs) gain in the regime of pump depletion. The solutions are divided into three parts. In the first part, we review the weak pump regime where the highly accurate second-order corrected undepleted-pump-approximation-based solution is adopted; in the high-gain regime where both the fiber loss and nonlinear term are nonnegligible effects and need to be accounted for along with the pump depletion; and in the saturation regime where the Stokes power is at the rear end exceeds critical power. We provide an accurate analytic expression for the BFA gain and show results of experimental validation. The presented analysis can be used to accurately predict the performance of Brillouin fiber amplifiers working in any regime.
Microbolometers and photon detectors are two main technologies to address the needs in Infrared Sensing applications. While the microbolometers in both complementary metal-oxide semiconductor (CMOS) and Micro-Electro-Mechanical Systems (MEMS) technology offer many advantages over photon detectors, they still suffer from nonlinearity and relatively low temperature sensitivity. This paper not only offers a reliable solution to solve the nonlinearity problem but also demonstrate a noticeable potential to build ultra-sensitive CMOS–MEMS temperature sensor for infrared (IR) sensing applications. The possibility of a 31× improvement in the total absolute frequency shift with respect to ambient temperature change is verified via both COMSOL (multiphysics solver) and theory. Nonlinearity problem is resolved by an operating temperature sensor around the beam bending point. The effect of both pull-in force and dimensional change is analyzed in depth, and a drastic increase in performance is achieved when the applied pull-in force between adjacent beams is kept as small as possible. The optimum structure is derived with a length of 57 µm and a thickness of 1 µm while avoiding critical temperature and, consequently, device failure. Moreover, a good match between theory and COMSOL is demonstrated, and this can be used as a guidance to build state-of-the-art designs.