The recently discovered non-Hermitian skin effect (NHSE) manifests the breakdown of current classification of topological phases in energy-nonconservative systems, and necessitates the introduction of non-Hermitian band topology. So far, all NHSE observations are based on one type of non-Hermitian band topology, in which the complex energy spectrum winds along a closed loop. As recently characterized along a synthetic dimension on a photonic platform, non-Hermitian band topology can exhibit almost arbitrary windings in momentum space, but their actual phenomena in real physical systems remain unclear. Here, we report the experimental realization of NHSE in a one-dimensional (1D) non-reciprocal acoustic crystal. With direct acoustic measurement, we demonstrate that a twisted winding, whose topology consists of two oppositely oriented loops in contact rather than a single loop, will dramatically change the NHSE, following previous predictions of unique features such as the bipolar localization and the Bloch point for a Bloch-wave-like extended state. This work reveals previously unnoticed features of NHSE, and provides the observation of physical phenomena originating from complex non-Hermitian winding topology.

Topological acoustics has recently revolutionized fundamental concepts of acoustic propagation, giving rise to strikingly unique acoustic edge modes immune to backscattering. Despite the rapid progress in this field, simultaneous realization of reconfigurability, intelligentization, and automatic control over acoustic propagation paths is posing a great challenge. This challenge is overcome by proposing the concept of a programmable acoustic topological insulator based on two digital elements “0” or “1,” which consist of honeycomb‐lattice sonic crystals made of cylindrical rods with different diameters. The acoustic propagation paths in the topological insulators can be controlled automatically by programming different coding sequences, which arises from efficient transformation of pseudospin‐dependent edge modes on both interfaces of the digital elements. More importantly, a unique unit is experimentally fabricated that has either a “0” or “1” response automatically manipulated by an air cylinder, and design topological insulators with programmable functionality, to realize three digital acoustic devices, such as a single‐pole double‐throw switch, a single‐pole single‐throw switch, and a tunable logic gate. The proposed programmable topological insulators may enable future intelligent acoustic devices with exciting reconfigurable and programmable functionalities, which may lead to important advances in various applications, such as integrated acoustics, acoustic security, and information processing.

We report both experimentally and numerically that a broadband acoustic lens with asymmetric focusing is realized by dual-layer metasurfaces in air. The acoustic waves can be focused on a side with 0.4 wavelength resolution focusing characteristic, but cannot transmit through the lens in a large range of incident angles on the other side. This exotic phenomenon exists in the range of 2910–3610 Hz, which arises from the asymmetric phase manipulation induced from the dual-layer metasurfaces. More importantly, without changing the structure of both metasurfaces, the horizontal and vertical positions of the focus can be systematically manipulated by mechanically changing the distance between both metasurfaces and the incident angle, respectively. The proposed lens has the advantages of broadband multifunctionality, subwavelength focusing, planar structure, and tunable properties, showing promising applications in focused ultrasound therapy and medical ultrasound imaging.

The characteristics of flow instabilities as well as the cavitation phenomenon in a centrifugal pump operating at low flow rates were studied by experimental and numerical means, respectively. Specially, a three-dimensional (3D) numerical model of cavitation was applied to simulate the internal flow through the pump and suitably long portions of the inlet and outlet ducts. As expected, cavitation proved to occur over a wide range of low flow rates, producing a characteristic creeping shape of the head-drop curve and developing in the form of nonaxisymmetric cavities. As expected, the occurrence of these cavities, attached to the blade suction sides, was found to depend on the pump's flow coefficient and cavitation number. The experiments focused on the flow visualization of the internal flow patterns by means of high-speed digital movies and in the analysis of the inlet pressure pulsations near the impeller eye by means of fast response pressure transducers. The experimental results showed that the unsteady behavior of the internal flow in the centrifugal pump operating at low flow rates has the characteristics of a peculiar low-frequency oscillation. Meanwhile, under certain conditions, the low-frequency pressure fluctuations were closely correlated to the flow instabilities induced by the occurrence of cavitation phenomena at low flow rates. Finally, the hydraulic performances of the centrifugal pump predicted by numerical simulations were in good agreement with the corresponding experimental data.

Crystalline materials can host topological lattice defects that are robust against local deformations, and such defects can interact in interesting ways with the topological features of the underlying band structure. We design and implement a three dimensional acoustic Weyl metamaterial hosting robust modes bound to a one-dimensional topological lattice defect. The modes are related to topological features of the bulk bands, and carry nonzero orbital angular momentum locked to the direction of propagation. They span a range of axial wavenumbers defined by the projections of two bulk Weyl points to a one-dimensional subspace, in a manner analogous to the formation of Fermi arc surface states. We use acoustic experiments to probe their dispersion relation, orbital angular momentum locked waveguiding, and ability to emit acoustic vortices into free space. These results point to new possibilities for creating and exploiting topological modes in three-dimensional structures through the interplay between band topology in momentum space and topological lattice defects in real space.