Irfan Khan

Mr. Irfan Khan


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 July 2015 in RSC Advances
Verified
Journal Article
Closed access
PDF file
IKIrfan Khan
Irfan Khan
TMTeoh. K. Min
Teoh. K. Min
KAKhairun Azizli
Khairun Azizli
SSSuriati Sufian
Suriati Sufian
HUHafeez Ullah
Hafeez Ullah
ZMZakaria Man
Zakaria Man
Phosphoric acid based geopolymers (PAGPs) are a class of geopolymers that are produced by phosphoric acid activation of metakaolin. In this work, two different PAGPs have been synthesized using phosphoric acid to alumina molar ratios of 1 : 1 and 1.2 : 1. The surface profile, chemical composition, micromorphology, and texture properties of the geopolymers were instrumentally determined. Both geopolymers have shown a mesoporous profile with the avg. pore size of 8.6 and 19.4 nm by GP-1M (P : Al = 1 : 1) and GP-2M (P : Al = 1.2 : 1), respectively. Thermogravimetric analysis revealed that these geopolymers were thermally stable up to 800 °C, although the formation of quartz, cristobalite and tridymite was observed in XRD analysis of the samples treated at 800 °C for two hours. The synthesized geopolymers were utilized for the adsorption of methylene blue (MB) by investigating the effect of the amount of adsorbent, pH of the solution and shaking period. The batch kinetics study fitted best into the pseudo second order (PSO) reaction kinetic model. In isotherm modelling studies, the Langmuir isotherm model was best fitted and was used to describe the mechanism of the adsorption. Experimental adsorption capacities (qe) of 2.84 and 3.01 mg g−1 were recorded for GP-1M and GP-2M, respectively. Used adsorbents were successfully regenerated by furnace treatment at 400 °C for two hours, and the regenerated adsorbents presented enhanced adsorption capacities in the range of 4.9–5.07 mg g−1 for five repeat cycles, elucidating that the material is suitable for multiple time use.

1 March 2015 in Ceramics International
Verified
Journal Article
Closed access
IKIrfan Khan
Irfan Khan
KAKhairun Azizli
Khairun Azizli
SSSuriati Sufian
Suriati Sufian
ZMZakaria Man
Zakaria Man

16 January 2025 in RSC Advances
Verified
Journal Article
Open access
PDF file
IKIrfan Khan
Irfan Khan
SSSuriati Sufian
Suriati Sufian
FHFarrukh Hassan
Farrukh Hassan
Muhammad Rashid ShamsuddinMuhammad Rashid Shamsuddin
Muhammad Rashid Shamsuddin
MFMuhammad Farooq
Muhammad Farooq
In this study, a binary composite adsorbent based on activated carbon and phosphoric acid geopolymer foam (ACP) was prepared by combining phosphoric acid geopolymer (PAGP) with activated carbon (AC) and applied for the removal of methylene blue (MB). Activated carbon was thoroughly mixed with a mixture of fly ash and metakaolin in varying ratios, followed by phosphoric acid activation and thermal curing. The ACP adsorbent was characterized using scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectrophotometer, X-ray diffractometer (XRD), surface area analyser (SAP), and thermogravimetric analyser (TGA). Batch analysis was performed to examine the effects of various adsorption parameters including pH (2, 4, 6, 7, 8, and 10), adsorbent dosage (0.06–0.2 g), MB concentration (50–250 mg L−1), contact duration (up to 240 minutes), and temperature (25–55 °C). The ACP with 70% PAGP and 30% AC was found to be the most suitable adsorbent as it maintained its structure and exhibited better MB adsorption. The ACP had a surface area of 47.36 m2 g−1 and a pore size of 5.6 nm and was found to be amorphous in nature. The adsorption equilibrium reached in 240 minutes at pH 7, indicating an efficient adsorption process. The adsorption increased with the initial dye concentration and decreased with the increase in temperature. The ideal parameters for adsorption of MB using ACP include 0.2 g of adsorbent, 25 °C, pH 10, and 240 minutes. The adsorption data fitted well with the Langmuir isotherm, pseudo-second-order (PSO) kinetics model, and three-step intraparticle diffusion (IPD) model. The adsorption capacity calculated using the Langmuir isotherm was 204.8 mg g−1 with an R2 = 0.989. Thermodynamics parameters showed that the adsorption process was exothermic, energetically favourable, and associated with a decrease in entropy. According to the FTIR findings, pH effect, Langmuir isotherm, PSO kinetics, IPD model, and thermodynamics factors, chemisorption is identified as the predominant process. Different machine learning models, i.e., gaussian process regression (GPR), support vector regression (SVR and SVR-rbf), random forest regression (RFR), decision tree regression (DTR) and artificial neural network (ANN), were trained and tested using adsorption capacity and % removal data. The ANN model (random search) demonstrated better performance compared to other models, achieving an R2 value of 0.873 for adsorption capacity and 0.799 for % removal on test data.

13 February 2015 in RSC Advances
Verified
Journal Article
Closed access
PDF file
IKIrfan Khan
Irfan Khan
KAKhairun Azizli
Khairun Azizli
SSSuriati Sufian
Suriati Sufian
ZMZakaria Man
Zakaria Man
AKAamir Sada Khan
Aamir Sada Khan
Nanomaterials have potential applications in the fields of catalysis, drug delivery, nanocomposites, and nanofluids. This study suggests a method for simultaneous preparation of nano silica and iron oxide from palm oil fuel ash (POFA). First, POFA was leached out with H2SO4 followed by alkali (NaOH) leaching. Basification (pH = 14) of the filtrate of the first leaching process produced iron oxide, while acidification of the alkali leachate produced nano silica. Addition of polymeric surfactant polyethylene glycol (PEG MW 20 000) resulted in deagglomeration of the silica nanoparticles. Silica nanoparticles with sizes in the range of 20–80 nm, surface area of 326 m2 g−1, and pore diameter of 8.2 nm were obtained. Thermokinetic and thermodynamic studies of template (PEG) removal from the silica matrix were performed using the Kissinger and Ozawa methods based on model-free kinetics. The activation energy of PEG decreased from 330 kJ mol−1 to 140 kJ mol−1 when it was used as a template; this result demonstrates the lack of chemical bonding between the surfactant and silica. The findings are supported by the Fourier-transform infrared spectra of the PEG–silica composites.

28 January 2025 in Ceramics International
Verified
Journal Article
Open access
IUImran Ullah
Imran Ullah
RNReinhard B. Neder
Reinhard B. Neder
IKIrfan Khan
Irfan Khan
IDInam Ud Din
Inam Ud Din
HPHuma Parwaz
Huma Parwaz
SSSuriati Sufian
Suriati Sufian

12 September 2014 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
IKIrfan Khan
Irfan Khan
KAKhairun Azizi
Khairun Azizi
SSSuriati Sufian
Suriati Sufian
ZMZakaria Man
Zakaria Man
In this study fly ash based aluminosilicate coatings were formulated and the effect of the Na/Al, Si/Al ratios, and curing time upon adhesion strength of geopolymeric coating was measured using Elcometer 108. Geopolymer gained their maximum adhesion within first three days. After 3 days curing on 60oC resulted into a maximum adhesion strength of 10MPa at Si/Al=3 and Na/Al=1.0. Micro structural analysis and Infra red spectroscopy was used to study the geopolymerisation process. Surface profile of fly ash particles shown that degree of reactivity has a direct relation with their surface roughness.