The influence of various graphene nano-platelets (GNPs) content on the tensile, flexural and Charpy impact characteristics of carbon, Kevlar and hybrid carbon/Kevlar fibers reinforced epoxy matrix composites was investigated. Both of composite configurations as carbon and Kevlar at outer and core skins were experimentally tested. The SEM images for flexural specimens were taken to observe the adhesion mechanism of GnPs particles with fiber/epoxy system. It is found that hybridization with Kevlar layers is contributed a positive effect on the hybrid carbon/Kevlar laminate structures in terms of tensile, flexural and impact behaviour. The incorporation of GnPs particles in hybrid and non-hybrid composite samples results in significant improvements in tensile, flexural and impact properties, and the greatest improvement occurs within the GnPs particle content of 0.1 and 0.25 wt%, indicating that the interfacial bonding between the matrix and the fibers is better due to the large surface area of the GnPs and the good entanglement between the GnPs layers and the matrix chains. The samples of impact test are experimented for edgewise and flatwise directions.

Poly (N-vinylcaprolactam) is a polymer that is biocompatible, water-soluble, thermally sensitive, non-toxic, and nonionic. In this study, the preparation of hydrogels based on Poly (N-vinylcaprolactam) with diethylene glycol diacrylate is presented. The N-Vinylcaprolactam-based hydrogels are synthesised by using a photopolymerisation technique using diethylene glycol diacrylate as a crosslinking agent, and Diphenyl (2, 4, 6-trimethylbenzoyl) phosphine oxide as a photoinitiator. The structure of the polymers is investigated via Attenuated Total Reflectance–Fourier Transform Infrared Spectroscopy. The polymers are further characterised using differential scanning calorimetry and swelling analysis. This study is conducted to determine the characteristics of P (N-vinylcaprolactam) with diethylene glycol diacrylate, including the addition of Vinylacetate or N-Vinylpyrrolidone, and to examine the effects on the phase transition. Although various methods of free-radical polymerisation have synthesised the homopolymer, this is the first study to report the synthesis of Poly (N-vinylcaprolactam) with diethylene glycol diacrylate by using free-radical photopolymerisation, using Diphenyl (2, 4, 6-trimethylbenzoyl) phosphine oxide to initiate the reaction. FTIR analysis shows that the NVCL-based copolymers are successfully polymerised through UV photopolymerisation. DSC analysis indicates that increasing the concentration of crosslinker results in a decrease in the glass transition temperature. Swelling analysis displays that the lower the concentration of crosslinker present in the hydrogel, the quicker the hydrogels reach their maximum swelling ratio.