pan chonggen

Dr. pan chonggen

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 March 2020 in Materials
Verified
Journal Article
Open access
PDF file
PCpan chonggen
pan chonggen
XLXu Li
Xu Li
JMJianghong Mao
Jianghong Mao
Concrete made with sea sand and seawater is rich in chlorine ions which are the main factors that induce corrosion of the reinforcement. In this study, an innovative method to rehabilitate reinforcement is presented; the concentrations of chloride ions and the corrosion inhibitor in concrete were measured. Electrochemical chloride extraction (ECE) was applied as a control experiment via using saturated Ca(OH)2 solution as an external electrolyte. Bidirectional electromigration (BIEM)technology combined with the corrosion inhibitor could not only remove the chloride ions but also protect the steel bar in concrete, and animidazoline inhibitor mixed in concrete is more effective than thetriethylenetetramine inhibitor due to the specific molecular structure. It was found that the optimum ratio of N/Cl reached the maximum value 3.3, when the concentration of inhibitor was 1. Meanwhile, the experimental results also revealed that the corrosion inhibitor and chloride ion concentrations reached necessary levels on the surface of the steel, and the corrosion inhibitor migrated effectively. Overall, the contents of imidazoline and triethylenetetramine inhibitor in seawater concrete are0.75% and 1%, respectively. The results demonstrate that the addition of the corrosion inhibitor and the application of bidirectional electromigration would effectively improve the durability of reinforced concrete containing sea sand and seawater.

5 June 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
JZJiawei Zang
Jiawei Zang
PCpan chonggen
pan chonggen
YHYu Hu
Yu Hu
SQShiyang Qu
Shiyang Qu
Using dehydrated silt soil as a raw material to produce ceramsite for ceramsite concrete blocks is a promising approach from both environmental and economic aspects. In this paper, flocculant polyacrylamide (PAM) was investigated to dehydrate the silt, and the optimal dosage of PAM was found to be 0.8 mol/L. The dehydrated silt was then fired to obtain ceramsite, which was subsequently used to prepare ceramsite autoclaved concrete blocks (CACB). The compressive strength of the blocks was tested and compared with that of ordinary autoclaved concrete blocks (ACB) and Nano-CaCO3 autoclaved concrete blocks (NACB). The results showed that the addition of ceramsite or Nano-CaCO3 can improve the compressive strength, with an increase of 44.4% and 55.6% at 7 d, respectively, compared with the autoclaved concrete block.

15 January 2020 in Materials
Verified
Journal Article
Open access
PDF file
PCpan chonggen
pan chonggen
JMJianghong Mao
Jianghong Mao
WJWei-liang Jin
Wei-liang Jin
Steel bars embedded in reinforced concrete are vulnerable to corrosion in high chloride environments. Bidirectional electromigration rehabilitation (BIEM) is a novel method to enhance the durability of reinforced concrete by extracting chloride out of concrete and introducing an inhibitor to the surface of the steel bar under the action of an electric field. During the migration process, a higher ionization capacity of the inhibitor with a symmetrical molecular structure was introduced. A new imidazoline inhibitor was, therefore, employed in this study due to its great ionization capacity. The effect of imidazoline and triethylenetetramine inhibitor on chloride migration, corrosion potential, and strength of concrete were explored. The research results showed that the effect of chloride extraction and electrochemical chloride extraction made no significant difference on the surface of the concrete, where chloride extraction efficiency was more than 70%, and the chloride extraction efficiency was more than 90% around the location of the steel. while a dry-wet cycle test, the potential of concrete increased by about 200 mV by mixing imidazoline inhibitor. The imidazoline inhibitor was found to be effective at facilitating chloride migration and ameliorating corrosion, meanwhile, it had a negligible impact on the concrete’s strength.

14 February 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
PCpan chonggen
pan chonggen
JZJiawei Zang
Jiawei Zang
KCKeyu Chen
Keyu Chen
JRJingge Ren
Jingge Ren
The effects of Nano-CaCO3 on the physical, mechanical properties and durability of cement-based materials were investigated in this paper. The mechanical property, durability and SEM microscopic tests of test blocks with different Nano-CaCO3 content were carried out. Results showed that Nano-CaCO3 could improve the flexural strength, compressive strength and impermeability of cement-based materials. When the content of Nano-CaCO3 is 2.0%, the strengthening effect of Nano-CaCO3 on the cement-based materials was optimized, and the flexural strength of cement-based materials after 3 d, 7 d and 28 d increased by 12.6%, 18% and 32.4%, respectively, compared with the reference group. When the content of Nano-CaCO3 exceeded 2.0%, the flexural strength of cement-based materials begins to decline with the increase of Nano-CaCO3 content. Similarly, when the content of Nano-CaCO3 reached 2.0%, the impermeability of the cement-based materials was also optimized, and the permeability height of the base group could be increases by 41.4%. At the early stage of hydration, the exothermic rate of cement with 2.0% Nano-CaCO3 content was higher than that of other contents. When the content of Nano-CaCO3 increased from 0 to 2.0%, the hydration exothermic rate increased gradually with the increase of Nano-CaCO3 content.

29 April 2023 in Materials
Verified
Journal Article
Open access
PDF file
JZJiawei Zang
Jiawei Zang
PCpan chonggen
pan chonggen
XLXu Li
Xu Li
KCKeyu Chen
Keyu Chen
DCDANTING CHEN
DANTING CHEN
The present study concerns hydrophobic surface treatments with silane-based coating on concrete surfaces against external ionic transport. The nano-modification and organic–inorganic modification were carried out on it and applied to the mortar matrix and concrete matrix. Lithium-based protective coating (PC1, PC2), nano-modified coating (NC1, NC2) and organic–inorganic composite coating (OL1) were prepared. The salt erosion resistance of the mortar matrix and concrete matrix was tested, compared with the blank group and the market. The test results found that the organic–inorganic modified OL1 and LC1 coatings have the greatest influence on the chloride penetration resistance of the mortar matrix, in which the chloride penetration depth of 28 days is reduced by 73.03% and 63.83%, respectively, compared with the blank group. The rate of mass change of the blank group, PC1 and PC2 coatings, and NL1 and NL2 coatings were 0.17%, 0.08%, and 0.03%, respectively. The result demonstrated that the lithium-based coating could effectively delay the penetration rate of chloride ions and sulfates into the mortar, and the nano-modified properties could improve the salt resistance. The scanning electron microscopy (SEM) showed that coating treatment would promote the secondary hydration of cement-based materials, by reducing the content of Ca(OH)2 in hydration products of cement-based materials and producing C-S-H gel, which is conducive to strength enhancement and pore refinement. The nano-component would promote the reaction degree, while the organic–inorganic coating would have the respective advantages of the two components.

18 August 2017 in China Ocean Engineering
Verified
Journal Article
Open access
PDF file
PCpan chonggen
pan chonggen
WJWei-Liang Jin
Wei-Liang Jin
JMJiang-Hong Mao
Jiang-Hong Mao
HZHua Zhang
Hua Zhang
LSLi-Hao Sun
Li-Hao Sun
DWDong Wei
Dong Wei
Steel bar in concrete structures under harsh environmental conditions, such as chlorine corrosion, seriously affects its service life. Bidirectional electromigration rehabilitation (BIEM) is a new method of repair technology for reinforced concrete structures in such chloride corrosion environments. By applying the BIEM, chloride ions can be removed from the concrete and the migrating corrosion inhibit can be moved to the steel surface. In conventional engineering, the concrete structure is often configured with a multi-layer steel mesh. However, the effect of the BIEM in such structures has not yet been investigated. In this paper, the relevant simulation test is carried out to study the migration law of chloride ions and the migrating corrosion inhibitor in a concrete specimen with complex steel mesh under different energizing modes. The results show that the efficiency of the BIEM increases 50% in both the monolayer steel mesh and the double-layer steel mesh. By using the single-sided BIEM, 87% of the chloride ions are removed from the steel surface. The different step modes can affect the chloride ion removal. The chloride ions within the range of the reinforcement protective cover are easier to be removed than those in the concrete between the two layers of steel mesh. However, the amount of migrating corrosion inhibitor is larger in the latter circumstances.