The present study concerns hydrophobic surface treatments with silane-based coating on concrete surfaces against external ionic transport. The nano-modification and organic–inorganic modification were carried out on it and applied to the mortar matrix and concrete matrix. Lithium-based protective coating (PC1, PC2), nano-modified coating (NC1, NC2) and organic–inorganic composite coating (OL1) were prepared. The salt erosion resistance of the mortar matrix and concrete matrix was tested, compared with the blank group and the market. The test results found that the organic–inorganic modified OL1 and LC1 coatings have the greatest influence on the chloride penetration resistance of the mortar matrix, in which the chloride penetration depth of 28 days is reduced by 73.03% and 63.83%, respectively, compared with the blank group. The rate of mass change of the blank group, PC1 and PC2 coatings, and NL1 and NL2 coatings were 0.17%, 0.08%, and 0.03%, respectively. The result demonstrated that the lithium-based coating could effectively delay the penetration rate of chloride ions and sulfates into the mortar, and the nano-modified properties could improve the salt resistance. The scanning electron microscopy (SEM) showed that coating treatment would promote the secondary hydration of cement-based materials, by reducing the content of in hydration products of cement-based materials and producing C-S-H gel, which is conducive to strength enhancement and pore refinement. The nano-component would promote the reaction degree, while the organic–inorganic coating would have the respective advantages of the two components.
This study focuses on the treatment of heavy metal ions and achieving enhancement of river sediment, which is rich in organics. Fulvic acid was used as the main representative of organics in which to study the transfer of Cu2+, Zn2+ ions in the electroosmotic system, in both the absence and presence of organics. In addition, the effects of the experiment parameters (i.e., voltages, displacement, and water content), heavy metal ion content (0.19% and 0.38%, respectively), and the concentration of organics (1.5%, 3%, and 4.5%) acting on migration of ions and physiochemical properties of sediment, before and after electro-osmosis treatment were investigated. Mineral composition of the soil and its microscopic characteristics were analyzed by scanning electron microscopy. The results show that the 4.5% fulvic acid added in the sediment can enhance the migration ability of Cu2+ and Zn2+ ions through complexation, and simultaneously effectively reduce the formation of colloids with the average reductions of Cu2+ ions and Zn2+ ions being 28 and 11 mg/kg, respectively. While the dewatering capacity of the sediment with higher fulvic acid content is weaker, fulvic acid can effectively reduce the corrosion of the electrode during the electro-osmosis process, due to the film formed on the metal surface. Moreover, the fulvic acid in the organics can be combined with the aluminum and calcium produced by the hydration of the cement, delaying the hydration of the cement, while simultaneously decomposing the hydration product and hindering the hardening of the cement, thereby affecting and destroying the formation of the sediment’s structure and its strength.
1 January 2019 in Journal of Fishery Sciences of China