In this letter, we present a two-dimensional 2-bit 4 × 4 phased-array antenna on a flexible Kapton substrate fabricated using inkjet printing. Printed carbon nanotube thin-film transistors (CNT-TFTs) form the switching elements in the phase-shifting network. A multilayer interconnection scheme has been utilized to fully package the subsystem and enable convenient access of the control lines to the 64 CNT-TFTs. By appropriately controlling the on and off states of the TFT switches using a computer mainframe, beam steering of a 5-GHz RF signal at four steering angles of θ = 0 ° , φ = 0 ° ; θ = 14.5 ° , φ = 0 ° ; θ = 20.7 ° , φ = -45 ° ; and θ = 34 ° , φ = -26.5 ° are experimentally demonstrated. The insertion loss and the power consumption by the switch array are measured to be 8.17 dB and 11.2 mW, respectively .
High-rate roll-to-roll (R2R) tracker systems are utilized for large volume flexible electronic device manufacturing, and the current alignment mechanism between layers is mainly achieved by relying on passive techniques. In this paper, we present a machine vision based alignment strategy that is used to achieve precise registration for stacking multilayers. Based on this strategy, we demonstrate two-layer printing with alignment accuracy better than 100 μm in web moving direction and 200 μm in lateral direction at a web rate of 5 m/min.
We report a subwavelength grating (SWG) coupler for coupling light efficiently into in-plane semiconductor nanomembrane photonic devices for the first time. The SWG coupler consists of a periodic array of rectangular trenches fabricated on a silicon nanomembrane (SiNM) transferred onto a glass substrate. At a wavelength of 1555.56 nm, the coupling efficiency of the fabricated 10 µm wide, 17.1 µm long SWG is 39.17% (−4.07 dB), with 1 dB and 3 dB bandwidths of 29 nm and 57 nm, respectively. Peak efficiency varies by 0.26 dB when measuring 5 fabricated grating pairs. Coupling efficiency can further be improved with an improved SiNM transfer process. Such high efficiency couplers allow for the successful realization of a plethora of hybrid photonic devices utilizing nanomembrane technology.
A mode transformer based on the quasi-vertical taper is designed to enable high coupling efficiency for interboard-level optical interconnects involving single-mode polymer waveguides and standard single-mode fibers. A triangular region fabricated above the waveguide is adopted to adiabatically transform the mode from the fiber into the polymer waveguide. The effects of the geometrical parameters of the taper, including width, height, tip width, etc., on the coupling efficiency are numerically investigated. Based on this, a quasi-vertical taper for the polymer rib waveguide system is designed, fabricated, and characterized. Coupling losses of and per coupler for the quasi-TM and quasi-TE mode, respectively, are measured across the optical communication C and L bands (1535 to 1610 nm). Low-cost packaging, leading to widespread utilization of polymeric photonic devices, is envisioned for optical interconnect applications.
24 March 2011 in IEEE Transactions on Nanotechnology
This paper presents the development and characterization of self-aligned carbon nanotube thin-film transistors (CNT-TFT) on flexible substrates. The channel consisting of dense, aligned, 99% pure semiconducting single-walled CNT is deposited using the dip-coat technique on a sacrificial substrate and then transferred on the device substrate. The source, drain, and gate structures are formed by the ink-jet printing technique. A novel source-drain contact formation using wet droplet of silver ink prior to the CNT thin-film application has been developed to enhance source-drain contact with the CNT channel. Bending test data on CNT-TFT test structures show minimal change (less than 10%) in their performance. Moreover, a special multilayer metal interconnection technology is demonstrated for flexible electronics applications. Bending test data on via test structure show change in resistance by less than 5%.
Bending tests of carbon nanotube thin-film transistors on flexible substrate have been characterized in this paper. The device channel consisting of dense, aligned, 99% pure semiconducting single-walled carbon nanotubes (SWCNT) are deposited using dip-coat technique on sacrificial substrate and then transferred on to the device substrate. Ink-jet printing technique is used to form the source, drain and gate electrodes using silver ink. A novel source-drain contact formation using wet droplet of silver ink prior to CNT thin-film application has been developed to enhance source-drain contact with the CNT channel. Bending test data on CNT-TFT test structures show minimal change (less than 10%) in their performance. To reduce the device performance variation due to bending, flexible electronic circuit is designed such that vertical device orientation is used for backward bending and horizontal orientation is used for forward bending.