The main problems in synthesis polymer clay nanocomposites (PCNs) with nanoclay filler is the nanoclay was not compatible to most of polymer matrix due to its hydrophilicity which is often causes agglomeration of the nanoclay in the polymer matrix. Surface modification of nanoclay for a good compatibility with polymer matrix is the most important step to achieve homogenous dispersion of clay platelets in polymers. Modification of nanoclay montmorillonite (MMT) can be done through conventional ion exchange method using cationic surfactants. Montmorillonite (MMT) was modified with several cationic surfactants based on its cationic exchange capacity (CEC). The effect of chemical composition of modified MMT on the basal spacing were evaluated by small angle x-ray diffraction (SAXS), the highest basal spacing expanded from 1.21 nm to 2.00 nm showed the intercalation of the surfactant ion into the intergalerry of sodium montmorillonite clay layers which caused increasing of surface area and porosity. FTIR spectra shows the successful of inserting alkyl groups from cationic surfactant in interlayer space of montmorillonite. Organophilization reduces the energy of sodium montmorillonite and improves its compatibility with organic polymer. Dispersion analysis and contact angle results shown the surface wettability of montmorillonite was enhanced from hydrophilic to organophilic and resulting good solubility in monomer phase.
3 May 2019 in IOP Conference Series: Materials Science and Engineering
Sintesis Hidrogen Peroksida melalui Proses Auto-oksidasi (AO) e-ethyl anthrakuinon (EAQ) dilakukan melalui pembuatan working solution sebagai pelarut dan 2-Ethyl antrhrakuinon (EAQ) sebagai career. Working solution yang mengandung senyawa EAQ dan turunannya yang digunakan cendrung membentuk senyawa sampingan (by product). Senyawa-senyawa sampingan ini memiliki campuran yang cukup kompleks yang dapat menyebabkan degradasi terhadap produk yang dihasilkan dan mengganggu proses pembuatan Hidrogen Peroksida. Produk sampingan ini dapat dicegah dan dihilangkan dengan penambahan senyawa Tetra Butyl Urea ke dalam working solution, senyawa TBU juga mampu menaikkan kelarutan EAQ dan ethylhydroanthrakuinon (HEAQ) dalam working solution sehingga mampu meningkatkan nilai Hidrogen Efisiensi. Hasil penelitian menunjukkan bahwa penambahan TBU sebesar 10-15 wt% ke dalam working solution atau 2.0-3.5% melalui steam treatment reaktor hidrogenasi dapat meningkatkan efisiensi hidrogenasi dan mencegah terbentuknya produk sampingan. Penurunan tegangan permukaan dari working solutin akan mendorong pembentukan emulsi seelama proses ekstraksi sehingga pada proses regenerasi akan mengembalikan working solution ke kondisi semula.